The following table provides a list of bugs fixed in previous versions. For a list of bug fixed from the current version, see Bug Fixes.
Internal Ref. | Issues |
3002314 | Description: On rare occasion, when port is configured to mloop toggle may cause link to not rise. |
Keywords: Optic in Mloop | |
Discovered in Version: 31.2010.2110 | |
Fixed in Version: 31.2010.3118 | |
3127727 | Description: On rare occasion, when egress port is split to two, the egress port may get stuck due to wrong Fast Path configuration. |
Keywords: Switch Hang, Fast Path, Split | |
Discovered in Version: 31.2010.3004 | |
Fixed in Version: 31.2010.3118 | |
3082569 | Description: In some traffic patterns involving small packets, the PortRcvErrors counter may mistakenly count events of local physical errors due to an internal flow in the hardware that involves link packets. |
Keywords: Counters | |
Discovered in Version: 31.2010.2246 | |
Fixed in Version: 31.2010.3004 | |
3085427 | Description: On rare occasions, SHARP semaphore may remain locked on a port following an event of a port link down or an application crash. |
Keywords: SHARPv3 | |
Discovered in Version: 31.2010.2036 | |
Fixed in Version: 31.2010.3004 | |
3011581 | Description: On rare occasions, job failures with SharpError trap may be experienced as a result of previous jobs that have failed. |
Keywords: SHARPv3 | |
Discovered in Version: 31.2010.2036 | |
Fixed in Version: 31.2010.3004 | |
3000602 | Description: After disconnecting MMS4X00-NL* cable and connecting Ultron cable to the same port, ports fails to link up. |
Keywords: Cables | |
Discovered in Version: 31.2010.2110 | |
Fixed in Version: 31.2010.2300 | |
3060122 | Description: In the event of link fault of a link between root switch and non-root switch during the run of a job, the next job run on the non-root switch may fail. |
Keywords: SHARPv3 | |
Discovered in Version: 31.2010.2036 | |
Fixed in Version: 31.2010.2300 | |
2923464 | Description: When using MMS4X00-NL Optical module, on rare occasions port that is in NDR speed may get stuck and stay in Polling state. |
Keywords: NDR, Optical Module | |
Discovered in Version: 31.2010.1404 | |
Fixed in Version: 31.2010.2246 | |
2859363 | Description: When using NVIDIA Quantum-2 systems in Auto-Neg mode, NDR speed in one lane (1x) is not supported. |
Keywords: Auto-Negotiation | |
Discovered in Version: 31.2010.1310 | |
Fixed in Version: 31.2010.2246 | |
3033131 | Description: The number of flows changed from 2 to 1, as intended. |
Keywords: SHARPv3 | |
Discovered in Version: 31.2010.2110 | |
Fixed in Version: 31.2010.2246 | |
2972388 | Description: Running of concurrent jobs may lead to states where jobs unexpectedly terminate or get stuck. |
Keywords: SHARPv3 | |
Discovered in Version: 31.2010.2036 | |
Fixed in Version: 31.2010.2110 | |
2982113 | Description: On rare occasions, job resource cleanup may fail. |
Keywords: SHARPv3 | |
Discovered in Version: 31.2010.2036 | |
Fixed in Version: 31.2010.2110 | |
2971339 | Description: During high load scenarios, performance degradation may be experienced. |
Keywords: SHARPv3 | |
Discovered in Version: 31.2010.2036 | |
Fixed in Version: 31.2010.2110 | |
2849215 | Description: On NVIDIA Quantum-2 switches, when working with MFA7U10-H0xx cables, if one of the ports in a cage is disabled at the time of initialization by user configuration, reenabling the port will require toggling the link (i.e. enable → disable → enable). |
Keywords: NVIDIA Quantum-2, Cables | |
Discovered in Version: 31.2010.1310 | |
Fixed in Version: 31.2010.2036 | |
2890632 | Description: On NVIDIA Quantum-2 systems, changing the Optical module rate was not allowed. |
Keywords: Optical Modules | |
Discovered in Version: 31.2010.1310 | |
Fixed in Version: 31.2010.2036 | |
2885798 | Description: In NVIDIA Quantum-2 systems, effective errors may occur with short Copper cable MCP4Y10-N00B. |
Workaround: N/A | |
Discovered in Version: 31.2010.1310 | |
Fixed in Version: 31.2010.2036 | |
2910161 | Description: In auto-negotiation flow, using copper cables when toggling both port's sides may cause the port to get stuck on rare occasions. |
Keywords: Auto-Negotiation, Copper Cables | |
Discovered in Version: 31.2010.1310 | |
Fixed in Version: 31.2010.2036 |