Blink LEDs
Blink LEDs will not appear in the boot menu if the feature is not supported by the firmware.
| Location: | Main Configuration Form |
|---|---|
| Description: | Specifies the number of seconds the LEDs on physical network port should blink to assist with port identification. Only valid for adapters with blink LEDs. |
| Configurable: | Yes – via input |
| Persistency: | Valid only for current cycle |
| Reboot required: | No |
| Available options: | 0-15 sec |
| Default Value: | 0 |
Device Name
| Location: | Main Configuration Form |
|---|---|
| Description: | The device's product name |
| Configurable: | No |
Chip Type
| Location: | Main Configuration Form |
|---|---|
| Description: | Specifies the chip type |
| Configurable: | No |
PCI Device ID
| Location: | Main Configuration Form |
|---|---|
| Description: | The PCI Device ID of the controller |
| Configurable: | No |
PCI Address
| Location: | Main Configuration Form |
|---|---|
| Description: | Specifies the BIOS assigned PCI Bus:Device:Function identifier of the card |
| Configurable: | No |
Link Status
| Location: | Main Configuration Form |
|---|---|
| Description: | Displays current link status on port |
| Configurable | No |
Network Link Type
Network Link Type will not appear in the boot menu if the feature is not supported by the firmware.
| Location: | Main Configuration Form |
|---|---|
| Description: | Allows user to manually choose link type on selected VPI devices |
| Configurable: | Yes – via input |
| Persistency: | Persistent through AC cycle |
| Reboot required: | Yes – reboot is needed for this change to take effect. |
| Available options: | Ethernet/InfiniBand/VPI |
Link Speed
| Location: | Main Configuration Form |
|---|---|
| Description: | Defines link working speed. |
| Configurable: | No |
| Value restrictions: | - |
MAC Address
| Location: | Main Configuration Form |
|---|---|
| Description: | Permanent MAC address assigned during manufacturing |
| Configurable: | No |
Virtual MAC Address
| Location: | Main Configuration Form |
|---|---|
| Description: | Displays device's virtual MAC address |
| Configurable: | No |
Socket Direct Operation
| Location: | Main Configuration Form |
|---|---|
| Description: | Indicates whether Socket Direct functionality is enabled or not. |
| Configurable: | No |
