HII VMware Configuration

VMware Configuration

Specifies the type of virtualization used by the controller on all ports.

Only valid for adapters that support SR-IOV virtualization mode.

Yes – built-in options

Persistent through AC cycle

Yes – reboot is needed in order for this change to be applied

• Enable

• Disable

Enabled

VMware Configuration

The number of Virtual Functions advertised and usable by the driver.

Only valid for adapters that support SR-IOV virtualization mode.

Yes – via input – If virtualization mode is SR-IOV

Persistent through AC cycle

Yes – reboot is needed in order for this change to be applied

Minimum integer value is 0.

Maximum integer value is the value supported by the firmware installed.

64

VMware Configuration

The number of UPT interfaces the NIC supports (limited by number of maximum VFs).

Yes – via input – If virtualization mode is SR-IOV

Persistent through AC cycle

Yes – reboot is needed in order for this change to be applied

Minimum integer value is 0.

Maximum integer value is the value supported by the firmware installed.

64

VMware Configuration

Selects whether the NIC internal LLDP client is enabled or not.

• Disable - The NIC LLDP client will not send LLDP frames or listen to incoming LLDP (incoming LLDP frames will be routed to the host)

• Enable - The NIC LLDP client will transmit optional and mandatory LLDPs and will receive all incoming LLDPs frames

Yes – via input – If virtualization mode is SR-IOV

Persistent through AC cycle

Yes – reboot is needed in order for this change to be applied

• Enable

• Disable

64

VMware Configuration

Defines the way resources are allocated for LAG.

Yes – via input – If virtualization mode is SR-IOV

Persistent through AC cycle

Yes – reboot is needed in order for this change to be applied

• Enable

• Disable

64