|
Ref # |
Issue |
|
3432385 |
Description: UFM does not support HDR switch configured with hybrid split mode, where some of the ports are split and some are not. |
|
Workaround: UFM can properly operate when all or none of the HDR switch ports are configured as split. |
|
|
Keywords: HDR Switch, Ports, Hybrid Split Mode |
|
|
3461658 |
Description: After the upgrade from UFM Enterprise Appliance v1.4.0 GA to UFM Enterprise Appliance v1.4.1 FUR, the network fast recovery path in opensm.conf is not automatically updated and remains with a null value (fast_recovery_conf_file (null)) |
|
Workaround: If you wish to enable the network fast recovery feature in UFM, make sure to set the appropriate path for the current fast recovery configuration file (/opt/ufm/files/conf/opensm/fast_recovery.conf) in the opensm.conf file located at /opt/ufm/files/conf/opensm, before starting UFM. |
|
|
Keywords: Network fast recovery, Missing, Configuration |
|
|
N/A |
Description: Upgrading the UFM Enterprise Appliance SW while upgrading the UFM Enterprise Appliance OS is not supported. |
|
Workaround: Do not use the --appliance-sw-upgrade flag while upgrading the UFM Enterprise Appliance OS. Alternatively, upgrade the UFM Enterprise Appliance SW as described in UFM Enterprise Appliance Software Upgrade |
|
|
Keywords: SW Upgrade; OS Upgrade, --appliance-sw-upgrade |
|
|
3473600 |
Description: The UFM Enterprise service is enabled while upgrading the UFM Enterprise Appliance SW on HA mode. |
|
Workaround: Disable the UFM Enterprise service after the upgrade in HA mode by running the following command:
|
|
|
Keywords: SW Upgrade, HA Mode |
