This chapter displays all the relevant commands used to manage CLI session terminal.
cli clear-history Clears the command history of the current user. | ||
Syntax Description | N/A | |
Default | N/A | |
Configuration Mode | config | |
History | 1.5 | |
Example |
| |
Related Commands | ||
Notes |
cli default {auto-logout <minutes> | paging enable | prefix-modes {enable | show-config} | progress enable | prompt {confirm-reload | confirm-reset | confirm-unsaved | empty-password} Configures default CLI options for all future sessions. | ||
Syntax Description | minutes | Configures keyboard inactivity timeout for automatic logout. Range: 0-35791. Setting the value to 0 or using the no form of the command disables the auto-logout. |
paging enable | Enables text viewing one screen at a time | |
prefix-modes {enable | show-config} | Configures the prefix modes feature of CLI.
| |
progress enable | Enables progress updates | |
prompt confirm-reload | Prompts for confirmation before rebooting | |
prompt confirm-reset | Prompts for confirmation before resetting to factory state | |
prompt confirm-unsaved | Confirms whether or not to save unsaved changes before rebooting | |
prompt empty-password | Prompts for a password if none is specified in a pseudo-URL for SCP | |
Default | N/A | |
Configuration Mode | config | |
History | 1.5 | |
Example |
| |
Related Commands | show cli | |
Notes |
cli session {auto-logout <minutes> | paging enable | prefix-modes {enable | show-config} | progress enable | terminal {length <size> | resize | type <terminal-type> | width} | x-display full <display>} Configures default CLI options for all future sessions. | ||
Syntax Description | minutes | Configures keyboard inactivity timeout for automatic logout. Range: 0-35791. Setting the value to 0 or using the no form of the command disables the auto logout. |
paging enable | Enables text viewing one screen at a time | |
prefix-modes enable | show-config | Configures the prefix modes feature of CLI. | |
progress enable | Enables progress updates | |
terminal length | Sets the number of lines for the current terminal. Range: 5-999. | |
terminal resize | Resizes the CLI terminal settings (to match the actual terminal window) | |
terminal-type | Sets the terminal type. Valid options: ansi, console, dumb, linux, unknown, vt52, vt100, vt102, vt220, vt320, xterm. | |
terminal width | Sets the width of the terminal in characters. Range: 34-999. | |
x-display full <display> | Specifies the display as a raw string (e.g localhost:0.0) | |
Default | N/A | |
Configuration Mode | config | |
History | 1.5 | |
Example |
| |
Related Commands | show terminal | |
Notes |
show cli Displays the CLI configuration and status. | ||
Syntax Description | N/A | |
Default | N/A | |
Configuration Mode | Any configuration mode | |
History | 1.5 | |
Example |
| |
Related Commands | cli default | |
Notes |