Bug Fixes History
This section includes history of bug fixes of 3 major releases back. For older releases history, please refer to the relevant firmware versions Release Notes in https://docs.mellanox.com/category/adapterfw.
Internal Ref. | Issue |
4152704 | Description: Fixed an issue that resulted in firmware assertion 0x889f with CQ reference counter underflow. |
Keywords: Firmware assertion 0x889f | |
Discovered in Version: 20.39.3560 | |
Fixed in Release: 20.39.4082 | |
4000741 / 3611679 | Description: Fixed an issue that resulted in RX traffic halt upon a sudden failure on the host. In this case, the following log message is presented: "DETACH_FROM_MCG(0×807) timeout. Will cause a leak of a command resource / wait_func_handle_exec_timeout:1064:(pid 123313): cmd4: 2ERR_QP(0×507) No done completion”. |
Keywords: RX traffic | |
Discovered in Version: 20.39.3560 | |
Fixed in Release: 20.39.4082 | |
4149510 | Description: Fixed an issue that resulted in setup crash when |
Keywords: mbox | |
Discovered in Version: 20.39.3560 | |
Fixed in Release: 20.39.4082 | |
4149393 | Description: Added address validation in MLNX OEM CMD 0x0032 (get debug info) to be 4-bytes aligned. |
Keywords: Address validation, 0x0032 | |
Discovered in Version: 20.39.3560 | |
Fixed in Release: 20.39.4082 | |
4148357 | Description: Fixed the MPLS packets discards flow when the GLOBAL pause capability is disabled. |
Keywords: Global Pause | |
Discovered in Version: 20.39.3560 | |
Fixed in Release: 20.39.4082 |
Internal Ref. | Issue |
3887760 | Description: Fixed an issue that caused Completion Timeout to mistakenly be treated as Advisory Non-Fatal error. Now Completion Timeout is treated as uncorrectable error. |
Keywords: Completion Timeout, Advisory Non-Fatal error | |
Discovered in Version: 20.39.2048 | |
Fixed in Release: 20.39.3560 |
Internal Ref. | Issue |
3669258 | Description: Fixed a rare issue that prevented changes in mlxconfig from taking effect upon warm reboot. |
Keywords: mlxconfig | |
Discovered in Version: 20.38.1900 | |
Fixed in Release: 20.39.2048 | |
3668253 | Description: Removed the unmapped module in the INI to prevent firmware assert due to invalid local port (0x7f unmapped). |
Keywords: INI, firmware assert | |
Discovered in Version: 20.38.1900 | |
Fixed in Release: 20.39.2048 |
Internal Ref. | Issue |
3376815 | Description: Fixed an issue that caused Completion Timeout to mistakenly be treated as Advisory Non-Fatal error. Now Completion Timeout is treated as uncorrectable error. |
Keywords: Completion Timeout, Advisory Non-Fatal error | |
Discovered in Version: 20.38.1002 | |
Fixed in Release: 20.39.1002 | |
3605363 | Description: Get Temperature OEM command now always returns a unified temperature. |
Keywords: Temperature | |
Discovered in Version: 20.38.1002 | |
Fixed in Release: 20.39.1002 |
Internal Ref. | Issue |
3365411 | Description: Fixed a link failure that occurred due to a wrong 'is_inphi_cable' indication. |
Keywords: Link failure | |
Discovered in Version: 20.37.1014 | |
Fixed in Release: 20.38.1002 | |
3331179 | Description: Improved token calculation. |
Keywords: Token calculation | |
Discovered in Version: 20.37.1014 | |
Fixed in Release: 20.38.1002 | |
3491841 | Description: Fixed a firmware assert that occurred when tried to verify if the module supported "swap". |
Keywords: Firmware assert | |
Discovered in Version: 20.37.1014 | |
Fixed in Release: 20.38.1002 |
Internal Ref. | Issue |
3233061 | Description: Updated the link maintenance flow to avoid high uncorrectable error rate. |
Keywords: Error rate | |
Discovered in Version: 20.31.2354 | |
Fixed in Release: 20.37.1014 |