Firmware Compatible Products
The chapter contains the following sections:
These are the release notes for the NVIDIA® ConnectX®-6 DE adapters firmware. This firmware supports the following protocols:
InfiniBand - SDR, QDR, FDR, EDR, HDR100, HDR
PCI Express 4.0, supporting backwards compatibility for v3.0, v2.0 and v1.1
1. Speed that supports both NRZ and PAM4 modes in Force mode and Auto-Negotiation mode.
When connecting an NVIDIA-to-NVIDIA adapter card in ETH PAM4 speeds, Auto-Neg should always be enabled.
Please make sure to use a PCIe slot that can supply the required power to the ConnectX-6 DE adapter card as stated in section Specifications in the adapter card’s User Manual.
This firmware supports the devices and protocols listed below: Refer to the hardware documentation for the list of supported devices.
The following are the drivers’ software, tools, switch/HCA firmware versions tested that you can upgrade from or downgrade to when using this firmware version:
Supported Version | |
ConnectX-6 DE Firmware | 22.46.3048 / 22.46.1006 / 22.45.1020 |
DOCA-HOST | 3.1.0 / 3.0.0 Note: For the list of the supported Operating Systems, please refer to the driver's Release Notes. |
WinOF-2 | 25.7.50000 / 25.4.50020 / 25.1.51010 Note: For the list of the supported Operating Systems, please refer to the driver's Release Notes. |
MFT | 4.33.0-169 / 4.32.0-120 / 4.31.0-149 Note: For the list of the supported Operating Systems, please refer to the driver's Release Notes. |
FlexBoot | 3.8.100 |
UEFI | 14.39.13 |
MLNX-OS | 3.12.2002 onwards |
Cumulus | 5.11.0.0026 onwards |
NVIDIA Quantum Firmware | 27.2014.2084 onwards |
SwitchX-IB 2 Firmware | 15.2010.5108 onwards |
SwitchX-IB Firmware | 11.2008.3328 onwards |