Bug Fixes History
This section includes history of bug fixes of 3 major releases back. For older releases history, please refer to the relevant firmware versions Release Notes .
|
Internal Ref. |
Issue |
|
3985535 |
Description: Fixed an issue that caused RDE PortMetrics property Transceivers.SupplyVoltage to be reflected in incorrect units of 100uV instead of V. |
|
Keywords: RDE |
|
|
Discovered in Version: 22.41.1000 |
|
|
Fixed in Release: 22.42.1000 |
|
|
3938744 |
Description: Prevented HCA_CAP from allowing rogue drivers to create more EQs than the number allowed in the HCA_CAP.max_num_eqs. |
|
Keywords: HCA_CAP |
|
|
Discovered in Version: 22.41.1000 |
|
|
Fixed in Release: 22.42.1000 |
|
|
3976276 |
Description: Fixed an issue that prevented the SFF module from accessing the EEPROM data when removing the CMIS module and inserting the SFF module instead of it. |
|
Keywords: EEPROM, SFF, CMIS |
|
|
Discovered in Version: 22.41.1000 |
|
|
Fixed in Release: 22.42.1000 |
|
Internal Ref. |
Issue |
|
3677596 |
Description: Fixed an issue that caused the GTP length field to automatically be modified at the TX side when an incorrect or invalid length was detected. |
|
Keywords: GTP length field, Tx |
|
|
Discovered in Version: 22.39.1002 |
|
|
Fixed in Release: 22.41.1000 |
|
|
3751258 |
Description: Fixed an issue that caused the switch port to go down due to MC packets mirrored back to the switch when in promiscuous mode. |
|
Keywords: Promiscuous mode, switch, MC packets |
|
|
Discovered in Version: 22.39.1002 |
|
|
Fixed in Release: 22.41.1000 |
|
|
3555832 |
Description: Fixed an issue that caused traffic failure when modifying the VIRTIO_NET_F_MRG_RXBUF bit for the VDPA device during traffic. |
|
Keywords: VDPA, MRG_RXBUF |
|
|
Discovered in Version: 22.39.1002 |
|
|
Fixed in Release: 22.41.1000 |
|
|
3771100 |
Description: Fixed an issue that resulted in the second mkey index returning even if it was not set in the creation of the virtio q when querying virtio q object. |
|
Keywords: VDPA, virtio, query object |
|
|
Discovered in Version: 22.39.1002 |
|
|
Fixed in Release: 22.41.1000 |
|
|
3691774 |
Description: Fixed an issue that resulted in traffic loss after performing Live Migration with virtio vq "frozen-ready" feature. Note: When the traffic load is high, and the vq frozen-ready cap is on, traffic loss might still be experienced after modifying the vq from suspend to ready mode. |
|
Keywords: VDPA, live migration, virtio, resume |
|
|
Discovered in Version: 22.39.1002 |
|
|
Fixed in Release: 22.41.1000 |
|
Internal Ref. |
Issue |
|
3738555 |
Description: Enabled MCPT/PLDM over PCIe, changed the module power settings. |
|
Keywords: MCPT/PLDM over PCIe, |
|
|
Discovered in Version: 22.38.1002 |
|
|
Fixed in Release: 22.40.1000 |
|
|
3598020 |
Description: Improved distribution VQoS algorithm. |
|
Keywords: VQoS algorithm |
|
|
Discovered in Version: 22.38.1002 |
|
|
Fixed in Release: 22.40.1000 |
|
|
3708035 |
Description: Fixed an issue with Selective-Repeat configuration which occasionally caused retransmission to wait for timeout instead of out-of-sequence NACK. |
|
Keywords: RoCE, SR |
|
|
Discovered in Version: 22.38.1002 |
|
|
Fixed in Release: 22.40.1000 |
|
|
3695219 |
Description: Enabled the lowest minimum rate for SW DCQCN to enable congestion control to hold a larger amount of QPs without pauses or drops. |
|
Keywords: Congestion control, PCC, DCQCN |
|
|
Discovered in Version: 22.38.1002 |
|
|
Fixed in Release: 22.40.1000 |