Bug Fixes History
This section includes history of bug fixes of 3 major releases back. For older releases history, please refer to the relevant firmware versions Release Notes .
Internal Ref. | Issue |
4055323 | Description: Fixed a reference counter issue that resulted in the firmware assertion 0x889f with CQ reference counter underflow to solve a race condition. |
Keywords: FW assertion | |
Discovered in Version: 26.42.1000 | |
Fixed in Release: 26.43.2026 |
Internal Ref. | Issue |
3961942 | Description: Fixed an issue that resulted in setup crash when create_sq used invalid mbox. Now the invalid mbox is replaced with a valid DB. |
Keywords: mbox | |
Discovered in Version: 26.42.1000 | |
Fixed in Release: 26.43.1014 | |
4040226 | Description: Added a recovery step in case of CQ doorbell getting lost during VF migration. |
Keywords: VF migration | |
Discovered in Version: 26.42.1000 | |
Fixed in Release: 26.43.1014 | |
4014351 | Description: Fixed the query for FACTORY default NV configuration values. The firmware always returned the "next" value to be applied. |
Keywords: Access register MNVDA, QUERY / SET configurations | |
Discovered in Version: 26.42.1000 | |
Fixed in Release: 26.43.1014 |
Internal Ref. | Issue |
3985535 | Description: Fixed an issue that caused RDE PortMetrics property Transceivers.SupplyVoltage to be reflected in incorrect units of 100uV instead of V. |
Keywords: RDE | |
Discovered in Version: 26.41.1000 | |
Fixed in Release: 26.42.1000 | |
3938744 | Description: Prevented HCA_CAP from allowing rogue drivers to create more EQs than the number allowed in the HCA_CAP.max_num_eqs. |
Keywords: HCA_CAP | |
Discovered in Version: 26.41.1000 | |
Fixed in Release: 26.42.1000 | |
3491575 | Description: Fixed an issue that resulted in the "time_since_last_clear" counter showing wrong indications. |
Keywords: Counters | |
Discovered in Version: 26.41.1000 | |
Fixed in Release: 26.42.1000 | |
3859439 | Description: Removed the logical port rate limiter to prevent the internal loopback traffic from exceeding the physical port network link speed when using the esw scheduling feature. |
Keywords: Logical port rate limiter | |
Discovered in Version: 26.41.1000 | |
Fixed in Release: 26.42.1000 |
Internal Ref. | Issue |
3555832 | Description: Fixed an issue that caused traffic failure when modifying the VIRTIO_NET_F_MRG_RXBUF bit for the VDPA device during traffic. |
Keywords: VDPA, MRG_RXBUF | |
Discovered in Version: 26.39.1002 | |
Fixed in Release: 26.41.1000 | |
3771100 | Description: Fixed an issue that resulted in the second mkey index returning even if it was not set in the creation of the virtio q when querying virtio q object. |
Keywords: VDPA, virtio, query object | |
Discovered in Version: 26.39.2048 | |
Fixed in Release: 26.41.1000 | |
3691774 | Description: Fixed an issue that resulted in traffic loss after performing Live Migration with virtio vq "frozen-ready" feature. Note: When the traffic load is high, and the vq frozen-ready cap is on, traffic loss might still be experienced after modifying the vq from suspend to ready mode. |
Keywords: VDPA, live migration, virtio, resume | |
Discovered in Version: 26.39.1002 | |
Fixed in Release: 26.41.1000 |
Internal Ref. | Issue |
3708035 | Description: Fixed an issue with Selective-Repeat configuration which occasionally caused retransmission to wait for timeout instead of out-of-sequence NACK. |
Keywords: RoCE, SR | |
Discovered in Version: 26.38.1002 | |
Fixed in Release: 26.40.1000 | |
3695219 | Description: Enabled the lowest minimum rate for SW DCQCN to enable congestion control to hold a larger amount of QPs without pauses or drops. |
Keywords: Congestion control, PCC, DCQCN | |
Discovered in Version: 26.38.1002 | |
Fixed in Release: 26.40.1000 |