Firmware Compatible Products
The chapter contains the following sections:
These are the release notes for the NVIDIA® ConnectX®-6 Lx adapters firmware. This firmware supports the following protocols:
Ethernet - 1GbE, 10GbE, 25GbE, 50GbE
PCI Express 4.0, supporting backwards compatibility for v3.0, v2.0 and v1.1
1. Speed that supports both NRZ and PAM4 modes in Force mode and Auto-Negotiation mode.
When connecting an NVIDIA-to-NVIDIA adapter card in ETH PAM4 speeds, Auto-Neg should always be enabled.
Refer to the hardware documentation for the list of supported devices.
The following are the drivers’ software, tools, switch/HCA firmware versions tested that you can upgrade from or downgrade to when using this firmware version:
Supported Version | |
ConnectX-6 Lx Firmware | 26.43.8002 / 26.43.3608 / 26.43.2566 |
DOCA-HOST | 2.9.3 / 2.9.2 Note: For the list of the supported Operating Systems, please refer to the driver's Release Notes. |
MLNX_OFED | 24.10-3.2.5.0 / 24.10-1.1.4.0 / 24.10-0.7.0.0 Note: For the list of the supported Operating Systems, please refer to the driver's Release Notes. |
MLNX_EN (MLNX_OFED based code) | 24.10-3.2.5.0 / 24.10-1.1.4.0 / 24.10-0.7.0.0 Note: For the list of the supported Operating Systems, please refer to the driver's Release Notes. |
WinOF-2 | 24.10.50010 / 24.7.50000 / 24.4.50000 Note: For the list of the supported Operating Systems, please refer to the driver's Release Notes. |
MFT | 4.30.1-1210 / 4.30.1-113 / 4.30.1-8 Note: For the list of the supported Operating Systems, please refer to the driver's Release Notes. |
mstflint | 4.30.1-1210 / 4.30.1-113 / 4.30.1-8 Note: For the list of the supported Operating Systems, please refer to the driver's Release Notes. |
FlexBoot | 3.7.500 |
UEFI | 14.37.13 |
Cumulus | 5.11.0.0026 onwards |