In the following menu, you can set the following options:
Blink LEDs will not appear in the boot menu if the feature is not supported by the firmware.
LEDs starts to blink as soon as you press the Enter key.
| Location: | System setup/Port main configurations |
| Description: | Specifies the number of seconds the LEDs on physical network port should blink to assist with port identification. Only valid for adapters with blink LEDs. |
| Configurable: | Yes – via input |
| Persistency: | Valid only for current cycle |
| Effects: | Blink LEDs duration value of the port will be as set in the current cycle |
| Value restrictions: | The minimum integer value is 0 and the maximum is 15. |
| Location: | System setup/Port main configurations |
| Description: | Permanent MAC address assigned during manufacturing |
| Configurable: | No |
| Location: | NIC Partitioning Configuration |
| Description: | Permanent Node GUID assigned during manufacturing. |
| Configurable: | No |
| Availability: |
| Location: | NIC Partitioning Configuration |
| Description: | Permanent Port GUID assigned during manufacturing. |
| Configurable: | No |
| Availability: |
| Location: | NIC Partitioning Configuration |
| Description: | Displays the Virtual Node GUID. |
| Configurable: | No |
| Availability: |