iSCSI First Target Parameters
iSCSI First Target Parameters menu is applicable to ConnectX®-3/ConnectX®-3 Pro adapter cards only.
In the following menu, you can set the following options:
Location: | System setup/Port main configurations/iSCSI Configuration/iSCSI First target Parameters |
Description: | The boot Logical Unit Number (LUN) on the first iSCSI storage target. |
Configurable: | Yes – via input |
Persistency: | Persistent through AC cycle |
Effects: | If the legacy boot protocol is iSCSI or iSCSI without fail-over, and Connect is enabled, this will be the boot LUN in the root path for the first target. |
Value restrictions: | The minimum integer value is 0 and the maximum is 256. |
Location: | System setup/Port main configurations/iSCSI Configuration/iSCSI First target Parameters |
Description: | Enable/Disable connecting to the first iSCSI target. This will be ignored if both DHCP IP and DHCP Parameters are enabled in iSCSI general parameters. |
Configurable: | Yes – built-in options |
Persistency: | Persistent through AC cycle |
Available options: | 1 - Enabled |
Location: | System setup/Port main configurations/iSCSI Configuration/iSCSI First target Parameters |
Description: | The iSCSI Qualified Name (IQN) of the first target |
Configurable: | Yes – via input |
Persistency: | Persistent through AC cycle |
Effects: | If the legacy boot protocol is iSCSI or iSCSI without fail-over, and Connect is enabled, this will be the iSCSI Qualified name in the root path for the first target. |
Value restrictions: | Maximum string length is 223 |
Location: | System setup/Port main configurations/iSCSI Configuration/iSCSI First target Parameters |
Description: | The first iSCSI storage target Challenge-Handshake Authentication Protocol (CHAP) ID. |
Configurable: | Yes – via input |
Persistency: | Persistent through AC cycle |
Effects: | If the Connect and the CHAP Authentication are enabled – This will be the username used for the first target Challenge-Handshake Authentication Protocol. |
Value restrictions: | Maximum string length is 128. |
Location: | System setup/Port main configurations/iSCSI Configuration/iSCSI First target Parameters |
Description: | The Challenge-Handshake Authentication Protocol secret (CHAP password) of the first iSCSI storage target. |
Configurable: | Yes – via input |
Persistency: | Persistent through AC cycle |
Effects: | If the Connect and the CHAP Authentication are enabled – This will be the password used for the first target Challenge-Handshake Authentication Protocol. |
Value restrictions: | String length should be 0 or 12 to 16 |
Location: | System setup/Port main configurations/iSCSI Configuration/iSCSI First target Parameters |
Description: | The IP address of the first iSCSI target |
Configurable: | Yes – via input |
Persistency: | Persistent through AC cycle |
Effects: | If the legacy boot protocol is iSCSI or iSCSI without fail-over, and Connect is enabled, this will be the IP address in the root path for the first target. |
Value restrictions: | Should be in IPv4 format |
Location: | System setup/Port main configurations/iSCSI Configuration/iSCSI First target Parameters |
Description: | The IPv6 address of the first iSCSI target |
Configurable: | Yes |
Persistency: | Persistent through AC cycle |
Effects: | If the legacy boot protocol is iSCSI or iSCSI without fail-over,and IPv4/IPv6 support is selected as IPv6, and Connect is enabled, this will be the IP address in the root path for the first target. |
Value restrictions: | Should be in IPv6 format |
Location: | System setup/Port main configurations/iSCSI Configuration/iSCSI First target Parameters |
Description: | TCP Port number of first iSCSI target |
Configurable: | Yes – via input |
Persistency: | Persistent through AC cycle |
Effects: | If the legacy boot protocol is iSCSI or iSCSI without fail-over, and Connect is enabled, this will be the TCP Port in the root path for the first target. |
Value restrictions: | The minimum integer value is 1, and the maximum is 65535. |