Main Configuration
In the following menu, you can set the following options:
Blink LEDs will not appear in the boot menu if the feature is not supported by the firmware.
LEDs starts to blink as soon as you press the Enter key.
Location: | System setup/Port main configurations |
Description: | Specifies the number of seconds the LEDs on physical network port should blink to assist with port identification. Only valid for adapters with blink LEDs. |
Configurable: | Yes – via input |
Persistency: | Valid only for current cycle |
Effects: | Blink LEDs duration value of the port will be as set in the current cycle |
Value restrictions: | The minimum integer value is 0 and the maximum is 15. |
Location: | System setup/Port main configurations |
Description: | Permanent MAC address assigned during manufacturing |
Configurable: | No |
Location: | NIC Partitioning Configuration |
Description: | Permanent Node GUID assigned during manufacturing. |
Configurable: | No |
Availability: |
Location: | NIC Partitioning Configuration |
Description: | Permanent Port GUID assigned during manufacturing. |
Configurable: | No |
Availability: |
Location: | NIC Partitioning Configuration |
Description: | Displays the Virtual Node GUID. |
Configurable: | No |
Availability: |