web auto-logout <number-of-minutes> no web auto-logout Configures length of user inactivity before auto-logout of a web session. The no form of the command disables the web auto-logout (web sessions will never logged out due to inactivity). | ||
Syntax Description | number-of-minutes | The length of user inactivity in minutes. 0 disables the inactivity timer (same as a “no web auto-logout” command). |
Default | 60 minutes | |
Configuration Mode | config | |
History | 1.5 | |
Example |
| |
Related Commands | show web | |
Notes | The no form of the command does not automatically log users out due to inactivity. |
web enable no web enable Enables the web-based management console. The no form of the command disables the web-based management console. | ||
Syntax Description | N/A | |
Default | Enabled | |
Configuration Mode | config | |
History | 1.5 | |
Example |
| |
Related Commands | show web | |
Notes |
web http {enable | redirect} no web http {enable | redirect} Configures HTTP access to the web-based management console. The no form of the command negates HTTP settings for the web-based management console. | ||
Syntax Description | enable | Enable HTTP access to the web-based management console |
redirect | Enables redirection to HTTPS | |
Default | HTTP is enabled HTTP TCP port is 80 HTTP redirect to HTTPS is disabled | |
Configuration Mode | config | |
History | 1.5 | |
Example |
| |
Related Commands | show web | |
Notes | If HTTP access is enabled, this specifies whether a redirect from the HTTP port to the HTTPS port should be issued to mandate secure HTTPS access. |
web httpd listen {enable | interface <ifName>} no web httpd listen {enable | interface <ifName>} Enables the listen interface restricted list for HTTP and HTTPS. The no form of the command disables the HTTP server listen ability. | ||
Syntax Description | enable | Enable HTTP access to the web-based management console |
interface | Adds interface to Web server access restriction list (i.e. eth0, eth1) | |
Default | Listening is enabled All interfaces are permitted | |
Configuration Mode | config | |
History | 1.5 | |
Example |
| |
Related Commands | show web | |
Notes | If enabled, and if at least one of the interfaces listed is eligible to be a listen interface, then HTTP/HTTPS requests will only be accepted on those interfaces. Otherwise, HTTP/HTTPS requests are accepted on any interface. |
web https {certificate {default-cert | name <name> | regenerate} | enable | ssl} no web https {certificate | enable | ssl} Configure HTTPS access to the web-based management console. The no form of the command disables the HTTPS server listen ability. | ||
Syntax Description | certificate | Configure the certificate to use for HTTPS connections
|
enable | Enable HTTPS access o the web-based management console | |
ssl | Configure SSL/TLS settings for HTTPS | |
Default | HTTPS is enabled Default port is 443 | |
Configuration Mode | config | |
History | 1.5 | |
Example |
| |
Related Commands | show web web enable | |
Notes |
web session {renewal <minutes> | timeout <minutes>} no web session {renewal | timeout} Configures session settings. The no form of the command resets session settings to default. | ||
Syntax Description | renewal | Configures time before expiration to renew a session |
timeout | Configures time after which a session expires | |
Default | timeout – 2.5 hours renewal – 30 min | |
Configuration Mode | config | |
History | 1.5 | |
Example |
| |
Related Commands | show web | |
Notes |
web proxy auth {authtype <type>| basic [password <password> | username <username>]} no web proxy auth {authtype | basic {password | username } Configures authentication settings for web proxy authentication. The no form of the command resets the attributes to their default values. | ||
Syntax Description | type | Configures the type of authentication to use with web proxy. Possible values:
|
basic | Configures HTTP basic authentication settings for proxy | |
password | A password used for HTTP basic authentication with the web proxy | |
username | A username used for HTTP basic authentication with the web proxy | |
Default | Web proxy is disabled | |
Configuration Mode | config | |
History | 1.5 | |
Example |
| |
Related Commands | show web web proxy host | |
Notes |
web proxy host <ip-address> [port <port-number>] no web proxy Adds and enables a proxy to be used for any HTTP or FTP downloads. The no form of the command disables the web proxy. | ||
Syntax Description | ip-address | IPv4 address |
port | Sets the web proxy default port | |
Default | 1080 | |
Configuration Mode | config | |
History | 1.5 | |
Example |
| |
Related Commands | show web web proxy auth | |
Notes |
show web Displays the web configuration. | ||
Syntax Description | N/A | |
Default | N/A | |
Configuration Mode | Any configuration mode | |
History | 1.5 | |
Example |
| |
Related Commands | ||
Notes |