NVIDIA UFM-SDN Appliance Command Reference Guide v4.17.0

NVIDIA Docs Hub Homepage NVIDIA Networking Networking Software Management Software NVIDIA UFM-SDN Appliance Command Reference Guide v4.17.0 Scheduled Jobs

On This Page

job
comment
command
enable
execute
fail-continue
name
schedule type
schedule
show jobs

Scheduled Jobs

Use the commands in this section to manage and schedule the execution of jobs.

job

	job <job-id> no job <job-id> Creates a job. The no form of the command deletes the job.
Syntax Description	job-id	An integer
Default	N/A
Configuration Mode	config
History	1.5
Example	Copy Copied! `ufmapl [ mgmt-sa ] (config) # job 100 ufmapl [ mgmt-sa ] (config job 100) #`
Related Commands	show jobs
Notes	Job state is lost on reboot.

comment

	comment <comment> no comment Adds a comment to the job. The no form of the command deletes the comment.
Syntax Description	comment	String
Default	""
Configuration Mode	config job
History	1.5
Example	Copy Copied! `ufmapl [ mgmt-sa ] (config job 100) # comment example_comment`
Related Commands	show jobs
Notes

command

	command <sequence #> \| <command> no command <sequence #> Adds a CLI command to the job. The no form of the command deletes the command from the job.
Syntax Description	sequence #	An integer that controls the order the command is executed relative to other commands in this job. The commands are executed in an ascending order.
Syntax Description	command	CLI command
Default	N/A
Configuration Mode	config job
History	1.5
Example	Copy Copied! `ufmapl [ mgmt-sa ] (config job 100) # command 10 "show power"`
Related Commands	show jobs
Notes	The command must be defined with quotation marks ("") The command must be added as it was executed from the "config" mode. For example, in order to change the interface description you need to add the command: "interface <type> <number> description my-description".

enable

	enable no enable Enables the specified job. The no form of the command disables the specified job.
Syntax Description	N/A
Default	N/A
Configuration Mode	config job
History	1.5
Example	Copy Copied! `ufmapl [ mgmt-sa ] (config job 100) # enable`
Related Commands	show jobs
Notes	If a job is disabled, it will not be executed automatically according to its schedule; nor can it be executed manually.

execute

	execute Forces an immediate execution of the job.
Syntax Description	N/A
Default	N/A
Configuration Mode	config job
History	1.5
Example	Copy Copied! `ufmapl [ mgmt-sa ] (config job 100) # execute`
Related Commands	show jobs
Notes	The job timer (if set) is not canceled and the job state is not changed (i.e. the time of the next automatic execution is not affected) The job will not be run if not currently enabled

fail-continue

	fail-continue no fail-continue Continues the job execution regardless of any job failures. The no form of the command returns fail-continue to its default.
Syntax Description	N/A
Default	A job will halt execution as soon as any of its commands fails
Configuration Mode	config job
History	1.5
Example	Copy Copied! `ufmapl [ mgmt-sa ] (config job 100) # fail-continue`
Related Commands	show jobs
Notes

name

	name <job-name> no name Configures a name for this job. The no form of the command resets the name to its default.
Syntax Description	job-name	String defining a name for the job
Default	""
Configuration Mode	config job
History	1.5
Example	Copy Copied! `ufmapl [ mgmt-sa ] (config job 100) # name my-job`
Related Commands	show jobs
Notes

schedule type

	schedule type <recurrence-type> no schedule type Sets the type of schedule the job will automatically execute on. The no form of the command resets the schedule type to its default.
Syntax Description	recurrence-type	The available schedule types are: daily – the job is executed every day at a specified time weekly – the job is executed on a weekly basis monthly – the job is executed every month on a specified day of the month once – the job is executed once at a single specified date and time periodic – the job is executed on a specified fixed time interval starting from a fixed point in time
Default	once
Configuration Mode	config job
History	1.5
Example	Copy Copied! `ufmapl [ mgmt-sa ] (config job 100) # schedule type once`
Related Commands	show jobs
Notes	A schedule type is essentially a structure for specifying one or more future dates and times for a job to execute.

schedule <recurrence-type>

	schedule <recurrence-type> <interval-and-date> no schedule Sets the type of schedule the job will automatically execute on. The no form of the command resets the schedule type to its default.
Syntax Description	recurrence-type	The available schedule types are: daily – the job is executed every day at a specified time weekly – the job is executed on a weekly basis monthly – the job is executed every month on a specified day of the month once – the job is executed once at a single specified date and time periodic – the job is executed on a specified fixed time interval starting from a fixed point in time
Syntax Description	interval-and-date	Interval and date per recurrence type
Default	once
Configuration Mode	config job
History	1.5
Example	Copy Copied! `ufmapl [ mgmt-sa ] (config job 100) # schedule monthly interval 10`
Related Commands	show jobs
Notes	A schedule type is essentially a structure for specifying one or more future dates and times for a job to execute.

show jobs

	show jobs [<job-id>] Displays configuration and state (including results of last execution, if any exist) of all jobs, or of one job if a job ID is specified.
Syntax Description	job-id	Job ID
Default	N/A
Configuration Mode	Any configuration mode
History	1.5
Example	Copy Copied! `ufmapl [ mgmt-sa ] (config) # show jobs 10 Job 10: Status: inactive Enabled: yes Continue on failure: no Schedule Type: once Time and date: 1970/01/01 00:00:00 +0000 Last Exec Time: Thu 2012/04/05 13:11:42 +0000 Next Exec Time: N/A Commands: Command 10: show power Last Output: ===================== Module Status ===================== PS1 OK PS2 NOT PRESENT`
Related Commands
Notes

© Copyright 2024, NVIDIA. Last updated on Aug 15, 2024.