FDR10 Support

FDR10 support is disabled by default in UFM.

To enable FDR10 support

1. Modify the FDR10 parameter value in the conf/opensm/conf/opensm/opensm.conf file.

   0 - Do not use FDR10 (MLNX ExtendedPortInfo MADs are disabled)

   1 - Enable FDR10 when supported

   2 - Disable FDR10 when supported

2. Set the MLX_EPI parameter to true (MLX_EPI=true) in the conf/infiniband-diags/ibdiag.conf file.