NVIDIA® WinOF-2 supports the following NVIDIA® network adapter cards:
NICs | Supported Protocol | Supported Link Speed |
NVIDIA® ConnectX®-7 | InfiniBand | HDR, NDR200 and NDR |
Ethernet | 1GbE, 10GbE, 25GbE, 40GbE, 50GbE, 100GbE, 200GbE | |
NVIDIA® BlueField®-2 SmartNIC | Ethernet | 10, 25, 40, 50, and 100GbE |
NVIDIA® ConnectX®-6 Lx | Ethernet | 10, 25, and 50GbE |
NVIDIA® ConnectX®-6 Dx | Ethernet | 10, 25, 40, 50, 100 and 200GbE |
NVIDIA® ConnectX®-6 | Ethernet | 10, 25, 40, 50, 100 and 200GbE |
InfiniBand | SDR, FDR, EDR and HDR | |
NVIDIA® ConnectX®-5/Ex | Ethernet | 10, 25, 40, 50 and 100GbE |
InfiniBand | QDR, FDR and EDR | |
NVIDIA® ConnectX®-4 Lx | Ethernet | 10, 25, 40, and 50GbE |
NVIDIA® ConnectX®-4 | Ethernet | 10, 25, 40, 50 and 100GbE |
InfiniBand | QDR, FDR and EDR |
WinOF-2 is tested with the following firmware for NVIDIA® NICs:
Firmware versions listed are the minimum supported versions.
Upgrading to firmware 28.33.2028 from any previous Engineering Sample (earlier than version 28.98.2406) must be done before installing WinOF-2 v2.90 driver and requires going through the following steps:
Upgrade to 28.98.2406 version while the driver is enabled.
Upgrade to firmware version 28.33.2028 (the driver can be enable at this stage).
Downgrading from ConnectX-7 firmware 28.33.0494 to any previous Engineering Sample firmware is not supported.
NICs | Recommended Firmware Rev. | Additional Firmware Rev. Supported |
NVIDIA® ConnectX®-7 | 28.34.1002 | 28.33.4030 |
BlueField-2 integrated ConnectX-6 Dx Adapter | 24.34.1002 | 24.33.1048 |
BlueField integrated ConnectX-5 Adapter | 18.33.1048 | 18.32.1010 |
NVIDIA® ConnectX®-6 Lx | 26.34.1002 | 26.33.1048 |
NVIDIA® ConnectX®-6 Dx | 22.34.1002 | 22.33.1048 |
NVIDIA® ConnectX®-6 | 20.34.1002 | 20.33.1048 |
NVIDIA® ConnectX®-5 / ConnectX®-5 Ex | 16.34.1002 | 16.33.1048 |
NVIDIA® ConnectX®-4 Lx | 14.32.1010 | 14.31.1014 |
NVIDIA® ConnectX®-4 | 12.28.2006 | 12.28.2006 |
WinOF-2 is compatible with the following MFT versions:
Product | Recommended Rev. | Additional Rev. Supported |
MFT | 4.21.0 | 4.20.0 |