Bug Fixes History
This section includes history of bug fixes of 3 major releases back. For older releases history, please refer to the relevant firmware versions.
Internal Ref. | Issue |
303781 | Description: Fixed an issue that resulted in failure to apply QoS parameters on some ConnectX-4/ConnectX-4 Lx single port devices. |
Keywords: QoS | |
Detected in version: 2.80.50000 | |
Fixed in version: 2.90.50010 | |
3040366 | Description: Shorten the device name from "ConnectX Family mlx5Gen Virtual Function" to "ConnectX 5Gen vfunc" to avoid cases of messages being cut event-id 25 where the message was cut to "ctX Family mlx5Gen Virtual Function". |
Keywords: event-viewer | |
Detected in version: 2.80.50000 | |
Fixed in version: 2.90.50010 | |
2781020 | Description: mlx5cmd "-vportmapping" capability is not supported when using the embedded mode in NVIDIA BlueField devices. |
Keywords: mlx5cmd "-vportmapping", NVIDIA BlueField | |
Detected in version: 2.80.50000 | |
Fixed in version: 2.90.50010 | |
2861814 | Description: When using OID_QOS_OFFLOAD_SQ_STATS to retrieve statististics on an SQ connected to a vPort representing the PF (i.e. the vPort with the physical mac-address), it may count all the traffic on TC0, so the non-TC0 TCs counter will be '0'. |
Keywords: VMqOS statistics | |
Detected in version: 2.80.50000 | |
Fixed in version: 2.90.50010 | |
2864037 | Description: When using mlx5cmd "-vportmapping" on dual port devices, occasionally the header is not presented. |
Keywords: VportMapping, mlx5cmd | |
Detected in version: 2.80.50000 | |
Fixed in version: 2.90.50010 | |
2870173 | Description: Querying the SQ stat using the vfctrl get-queue-info command on ConnectX-4 and ConnectX-4 Lx devices may cause a BSOD as SQ stat is not supported on these devices. |
Keywords: SQ stat, BSOD, ConnectX-4, ConnectX-4 Lx, HWQOS | |
Detected in version: 2.80.50000 | |
Fixed in version: 2.90.50010 | |
2859027 | Description: mlx5cmd -b Smpquery is not supported on NVIDIA BlueField-2 when in Smart-NIC mode from the host. |
Keywords: NVIDIA BlueField-2, InfiniBand, Smpquery | |
Detected in version: 2.80.50000 | |
Fixed in version: 2.90.50010 | |
2952890 | Description: Fixed an issue related to DSCP for adapter cards older than ConnectX-6 Dx, that caused counters retrieved by OID_QOS_OFFLOAD_SQ_STATS to be with the wrong value. |
Keywords: VMqOS | |
Detected in version: 2.80.50000 | |
Fixed in version: 2.90.50010 | |
2876756 | Description: Fixed the wrong "Mmps" value printed in the mlxNdPerf tool. |
Keywords: mlxNdPerf tool | |
Detected in version: 2.80.50000 | |
Fixed in version: 2.90.50010 | |
2889930 | Description: Increased the timeout of loading multiple VF simultaneously to avoid cased of VFs failing to load. |
Keywords: Virtual Function, loading failure | |
Detected in version: 2.80.50000 | |
Fixed in version: 2.90.50010 | |
2899514 | Description: Fixed an issue that resulted in dynamic changes applied to the registry key "TrustedVFs" not to be applied without performing a driver restart. |
Keywords: Registry key "TrustedVFs" | |
Detected in version: 2.80.50000 | |
Fixed in version: 2.90.50010 | |
2951413 | Description: Increased the default size of resource dump into 2 pages instead of one. |
Keywords: Resource dump | |
Detected in version: 2.80.50000 | |
Fixed in version: 2.90.50010 | |
2727039 | Description: WinOF-2 installation package will not automatically update the firmware on devices that are using secured firmware. |
Keywords: Firmware upgrade, secure firmware | |
Detected in version: 2.70.51000 | |
Fixed in version: 2.80.50000 | |
2724780 | Description: On very rare cases a DevX call to create a native MKEY will fail due to fragmented memory in the allocated UMEM causing the UMEM page offset and the mkey page offset to misalign. |
Keywords: DevX, MKEY | |
Detected in version: 2.70.51000 | |
Fixed in version: 2.80.50000 | |
2793039 | Description: The operation of updating an SQ, when working with VMQoSv2 and more than 100 vPorts attached, might take up to a 1 minute. |
Keywords: SQ, VMQoSv2, vPorts | |
Detected in version: 2.70.51000 | |
Fixed in version: 2.80.50000 | |
2841375 | Description: Fixed an issue that caused a system crash due to a race between the miniport halt and the link state change event. |
Keywords: Race condition, system crash, IPoIB | |
Detected in version: 2.70.50000 | |
Fixed in version: 2.80.50000 | |
2849359 | Description: Modified the driver's behaviour to only access secure hardware registers. |
Keywords: Rshim driver | |
Detected in version: 2.70.50000 | |
Fixed in version: 2.80.50000 | |
2755744 | Description: Removed the global lock option (by default now it is removed) when in blue-flame mode (adapter NDIS config 'BlueFlame'), to prevent cases of heavy contention during concurrent RDMA send/read/write operations. |
Keywords: RDMA ND performance | |
Detected in version: 2.70.50000 | |
Fixed in version: 2.80.50000 | |
2752300 | Description: Shorten the adapter cards name in the Event Viewer to overcome an OS limitation related to long names. The following is an example of the new naming format:
|
Keywords: Event Viewer: Adapter Cards Names | |
Detected in version: 2.70.50000 | |
Fixed in version: 2.80.50000 | |
2731484 | Description: Fixed a possible system crash when deleting vPort under Rx traffic. |
Keywords: Virtualization, VMQ, VMMQ | |
Detected in version: 2.62.50010 | |
Fixed in version: 2.80.50000 | |
2722843 | Description: Fixed an issue that caused traffic lose and connection closure when TCP Timestamp option (ts-val) is present and the MSB is set together with RSC. |
Keywords: RSC, ts-val | |
Detected in version: 2.20 | |
Fixed in version: 2.80.50000 | |
2783155 | Description: Fixed an issue that allowed the installation process to be completed successfully even though one of the drivers was not updated. |
Keywords: Installation | |
Detected in version: 2.70.50000 | |
Fixed in version: 2.80.50000 | |
2700237 | Description: Added support for large system memory registration through ibv_reg_mr() and ibv_reg_mr_iova2(). |
Keywords: System memory registration | |
Detected in version: 2.70.50000 | |
Fixed in version: 2.80.50000 | |
2754300 | Description: Updated the NDIS version of the Rshim driver to 6.85. |
Keywords: NDIS, Rshim driver | |
Detected in version: 2.70.50000 | |
Fixed in version: 2.80.50000 | |
2770294 | Description: Changed the default value of "*RSSProfile" to 4 to be aligned with the MSDN requirements. On Windows Server 2019 and above, the new value will not overwrite the inbox driver setting due to the OS limitation. |
Keywords: RSS Profile | |
Detected in version: 2.70.50000 | |
Fixed in version: 2.80.50000 | |
2698839 | Description: Removed the local IP address in the event massage from the following events:
|
Keywords: Local IP, events | |
Detected in version: 2.70.50000 | |
Fixed in version: 2.80.50000 | |
2690993 | Description: Fixed a system crash that occurred upon printing information on fatal HW error while using on Arm64 platform. |
Keywords: Arm64, fatal HW error | |
Detected in version: 2.70.50000 | |
Fixed in version: 2.80.50000 | |
2703759 | Description: Fixed inconsistent values between NDIS counters and NVIDIA WinOF-2 counters when traffic is going through the DevX created resources. |
Keywords: Counters | |
Detected in version: 2.70.50000 | |
Fixed in version: 2.80.50000 | |
2690140 | Description: Requests of QPs with a string of values set to "max" (e.g., Max Queue Depth + Max SGE counter + Max inline Data size) cannot be processed by the driver as their accumulative size overcomes the WQ maximum size. |
Keywords: ND QP creation | |
Detected in version: 2.70.50000 | |
Fixed in version: 2.80.50000 | |
2701735 | Description: Disabling one of the GPUs while the application is running could lead to system crash. |
Keywords: GPU | |
Detected in version: 2.70.50000 | |
Fixed in version: 2.80.50000 | |
2683075 | Description: MPReset handler may be triggered by the OS when using Windows Server 2022 due to some OIDs (e.g. OID_NIC_SWITCH_DELETE_VPORT) that can take a very long time to be completed. |
Keywords: MiniportReset | |
Detected in version: 2.70.50000 | |
Fixed in version: 2.80.50000 | |
2710916 | Description: Wrong values on the VF-counters are exposed on the Hypervisor. |
Keywords: Counters | |
Detected in version: 2.70.50000 | |
Fixed in version: 2.80.50000 | |
2727039 | Description: WinOF-2 installation package will not automatically update the firmware on devices that are using secured firmware. |
Keywords: Firmware upgrade, secure firmware | |
Detected in version: 2.70.51000 | |
Fixed in version: 2.80.50000 | |
2827584 | Description: Fixed a rare issue that caused the DPDK Windows applications to fail to load due to wrong memory registration by the mlx5.sys driver. |
Keywords: DPDK | |
Detected in version: 2.70.50000 | |
Fixed in version: 2.70.53000 | |
2791350 | Description: Fixed an issue that caused traffic lose and connection closure when TCP Timestamp option (ts-val) is present and the MSB is set. The aggregated TCP packet created by the RSC used clearing the MSB resulting in loose due to invalid timestamp. |
Keywords: RSC | |
Detected in version: 2.70.50000 | |
Fixed in version: 2.70.53000 | |
2735248 | Description: Modified the Rshim BUS driver behavior to allow the "bfb push" option even when the driver detected an external USB cable connected that did not expose the virtual ETH and COM devices. |
Keywords: Rshim driver, bfb push | |
Detected in version: 2.70.50000 | |
Fixed in version: 2.70.51000 | |
2722843 | Description: Fixed an issue that caused the TCP connection to drop when working with RSC and TCP timestamp options. |
Keywords: RSC, TCP timestamp option | |
Detected in version: 2.70.50000 | |
Fixed in version: 2.70.51000 | |
2284224 | Description: UFM/SM reports a wrong node description. |
Keywords: IPoIB | |
Detected in version: 2.60.50000 | |
Fixed in version: 2.70.50000 | |
2673499 | Description: Changed the NumaNodeID NDI definition from enum to min/max to be aligned with MSDN requirements. |
Keywords: NumdNodeID, MSDN | |
Detected in version: 2.60.50000 | |
Fixed in version: 2.70.50000 | |
2673503 | Description: Changed the default value of "NumRSSQueues" to 16 to be aligned with MSDN requirements on Windows Server 2019 and above. The new value will not overwrite the inbox driver setting due to the OS limitation. |
Keywords: NumRSSQueues, Windows Server 2019 and above | |
Detected in version: 2.60.50000 | |
Fixed in version: 2.70.50000 | |
2680300 | Description: Fixed a wrong rate limitation (120 Gbps) when using 200GbE adapter cards with port_type of IPoIB. |
Keywords: Performance | |
Detected in version: 2.60.50000 | |
Fixed in version: 2.70.50000 | |
2671192 | Description: Changed the default value of *FlowControl" to 0 on Windows Server 2022 and above. Now the new value will not overwrite the inbox driver setting due to the OS limitation. |
Keywords: FlowControl, Windows Server 2022 and above | |
Detected in version: 2.60.50000 | |
Fixed in version: 2.70.50000 | |
2627088 | Description: Updated the maximum value of the DevXFSRules registry key to 0xfffffffe. |
Keywords: DevXFSRules | |
Detected in version: 2.60.50000 | |
Fixed in version: 2.70.50000 | |
2673498 | Description: Changed the default value of MaxRssProcessors to 16 to be aligned with MSDN requirements. On Windows Server 2019 and above, the new value will not overwrite the inbox driver setting due to an OS limitation. |
Keywords: MaxRssProcessors | |
Detected in version: 2.60.50000 | |
Fixed in version: 2.70.50000 | |
2677430 | Description: Changed the maximal value for VlanID to 4094, 4095 is reserved and should not be used. |
Keywords: VlanID | |
Detected in version: 2.60.50000 | |
Fixed in version: 2.70.50000 | |
2672442 | Description: Fixed an issue that prevented the package from returning a reboot error code when the MUX driver required reboot. |
Keywords: MUX driver | |
Detected in version: 2.60.50000 | |
Fixed in version: 2.70.50000 | |
2350785 | Description: Updated the handling of PDDR operational info table to report valid link speed for all devices. The updated registry has 3 mode:
|
Keywords: PDDR, pcam cap bit | |
Detected in version: 2.60.50000 | |
Fixed in version: 2.70.50000 | |
2459728 | Description: Fixed an issue that prevented RshimCmd from enumerating more than 1 device on a system with > 1 DPU. |
Keywords: RshimCmd | |
Detected in version: 2.60.50000 | |
Fixed in version: 2.70.50000 | |
2482298 | Description: Fixed an issue that caused the NDIS to crash when using version 20282 and PollMode feature. The latest 2022 OS does not have this issue. |
Keywords: NDIS Poll Mode | |
Detected in version: 2.60.50000 | |
Fixed in version: 2.70.50000 | |
2483060 | Description: Fixed a race condition in the ND filter as a result of a closed connector failure since the connector was asynchronously accessed by the CM disconnect request that handled the QP's flush. |
Keywords: ND connector | |
Detected in version: 2.60.50000 | |
Fixed in version: 2.70.50000 | |
2559765 | Description: Fixed an issue that caused the RshimCmd tool to crash when incorrect inputs were provided. |
Keywords: RshimCmd | |
Detected in version: 2.60.50000 | |
Fixed in version: 2.70.50000 | |
2579834 | Description: Fixed the reporting of the OS version that a VF is running on when using "mlx5cmd -driverversion". |
Keywords: DriverVersion Utility | |
Detected in version: 2.60.50000 | |
Fixed in version: 2.70.50000 | |
2622264 | Description: Added a new cable identifier information QSA (QSFP to SFP) to get a more accurate information about the cable from the driver side. |
Keywords: Cable info | |
Detected in version: 2.60.50000 | |
Fixed in version: 2.70.50000 | |
2634546 | Description: Added support for a new FW cap log_min_stride_wqe_sz and initialized an init failure process when the WQE size is too small to avoid HW issue. |
Keywords: log_min_stride_wqe_sz, striding rq | |
Detected in version: 2.60.50000 | |
Fixed in version: 2.70.50000 | |
2397425 | Description: Fixed an issue that resulted in the adapter's name being trimmed in the Event log messages when the message size was larger than the Event log message limit size (240 characters). |
Keywords: Event log message size | |
Detected in version: 2.60.50000 | |
Fixed in version: 2.70.50000 | |
2501105 | Description: Fixed an issue that prevented the package downgrade from replacing mlxdevx.dll in the system folder. |
Keywords: mlxdevx.dll, package downgrade | |
Detected in version: 2.60.50000 | |
Fixed in version: 2.70.50000 | |
2583088 | Description: Fixed an incorrect report related to the FwTracer feature on the VF. |
Keywords: FwTracer, Mlx5cmd | |
Detected in version: 2.60.50000 | |
Fixed in version: 2.70.50000 | |
1601551 | Description: Added support for cable information in ConnectX-6 / ConnectX-6 Dx / ConnectX-6 Lx and Bluefield-2 adapter cards. |
Keywords: PDDR Info, ConnectX-6, ConnectX-6 Dx, ConnectX-6 Lx, Bluefield-2 | |
Detected in version: 2.20 | |
Fixed in version: 2.70.50000 | |
2347181 | Description: Although the driver allows attaching HCAs to VM as a physical device using Windows' pass-through facility (Discrete Device Assignment (DDA)), the management tool mlx5cmd.exe is partially supported in a VM with passed-through HCAs. |
Keywords: Discrete Device Assignment (DDA), pass-through facility, management tool mlx5cmd.exe | |
Detected in version: 2.50.50000 | |
Fixed in version: 2.70.50000 | |
2385017 | Description: SmpQuery is not functional on dual ports VPI devices when the second port is using Ethernet and RoCE is enabled on that port. |
Keywords: SmpQuery | |
Detected in version: 2.60.50000 | |
Fixed in version: 2.70.50000 | |
2403578 | Description: Fixed incorrect timestamp in the PCAP file. |
Keywords: mlx5cmd.exe -Sniffer | |
Detected in version: 2.50.50000 | |
Fixed in version: 2.70.50000 | |
2604448 | Description: Fixed and issue that resulted in Virtual Function of a device with revisionID != 0 failed to load when running over an Operating System other than Windows. |
Keywords: VF | |
Detected in version: 2.60.50000 | |
Fixed in version: 2.60.51000 | |
2368632 | Description: Fixed an issue that caused SR-IOV to fail when using Windows Server 2012 R2 and WinOF-2 v2.50 driver. |
Keywords: SR-IOV | |
Detected in version: 2.50.50000 | |
Fixed in version: 2.60.50000 | |
1805972 | Description: Fixed an issue that caused the SmartNIC and the network adapters to be restarted, and consequently the driver to fail from loading, when the fwreset command was used. |
Keywords: BlueField, MlxFwReset | |
Detected in version: 2.40.50000 | |
Fixed in version: 2.60.50000 | |
2384297 | Description: Added a protection mechanism against multiple NIC-switch creation requests being sent to the same adapter. |
Keywords: NIC-switch creation | |
Detected in version: 2.50.50000 | |
Fixed in version: 2.60.50000 | |
2078012 | Description: If the Resource dump is re-enabled, and the VFs executes an error command, and the feature is supported by the firmware, a DMN folder might be created containing the VF failure command data. The unrelated DMN folder can be ignored. |
Keywords: ResourceDump, VF CMD FAIL | |
Detected in version: 2.40.50000 | |
Fixed in version: 2.60.50000 | |
2265031 | Description: Fixed the minimum and maximum values reported for "EnableRss" registry key. |
Keywords: EnableRss | |
Detected in version: 2.50.50000 | |
Fixed in version: 2.60.50000 | |
2281548 | Description: Added new counters ("Packets processed in interrupt mode" and "Packets processed in polling mode") to the Transmit DataPath counters. |
Keywords: Counters | |
Detected in version: 2.50.50000 | |
Fixed in version: 2.60.50000 | |
2321629 | Description: Removed the "modifyteam" option from the from mlx5muxtool. Note: The user will have to delete the team and recreate it if its name or mode needs to be changed. |
Keywords: "modifyteam", mlx5muxtool | |
Detected in version: 2.50.50000 | |
Fixed in version: 2.60.50000 | |
2329258 | Description: Fixed an issue that caused an infinite loop in VF initializing process when getting bad PCI header data. |
Keywords: VF, PCI | |
Detected in version: 2.50.50000 | |
Fixed in version: 2.60.50000 | |
2356474 | Description: Changed the default value of *PtpHardwareTimestamp to 0, Note: The new default value will not overwrite the existing value, the user must change it manually. For more information on the impact of keeping HW timestamp enabled see known issue 2374101. |
Keywords: PtpHardwareTimestamp | |
Detected in version: 2.50.50000 | |
Fixed in version: 2.60.50000 | |
2355210 | Description: Fixed the version check capability that prevented the MTU from being activated on older WinOF-2 versions such as 1.90. |
Keywords: WqeTooSmallWa | |
Detected in version: 2.20 | |
Fixed in version: 2.60.50000 | |
2356917 | Description: Mlx5Cmd -RssSniffer now displays the file's location that data is being written to when starting and stopping the sniffer. |
Keywords: Mlx5Cmd -RssSniffer | |
Detected in version: 2.50.50000 | |
Fixed in version: 2.60.50000 | |
2362900 | Description: Modified the Miniport driver behaviour. Now it sets a queue ID on all NBLs in a chain before notifying NDIS. |
Keywords: Miniport driver, NDIS | |
Detected in version: 2.50.50000 | |
Fixed in version: 2.60.50000 | |
2363760 | Description: Added support for WinPE basic commands to "Mlx5Cmd". |
Keywords: Mlx5Cmd, WinPE | |
Detected in version: 2.50.50000 | |
Fixed in version: 2.60.50000 | |
2370458 | Description: Modified the "Mlx5Cmd -RssSniffer" behaviour when the RssSniffer is already running. Now the command will fail and will also return a failure if it is stopped when the RssSniffer is not running. |
Keywords: Mlx5Cmd -RssSniffer | |
Detected in version: 2.50.50000 | |
Fixed in version: 2.60.50000 | |
2233169 | Description: [Windows Server 2019 build 19041 Onward] Fixed an installation failure that occurred when the same driver already exists on the device. |
Keywords: Driver installation | |
Detected in version: 2.50.50000 | |
Fixed in version: 2.60.50000 | |
2327695 | Description: Removed the lscpi tool from the system snapshot tool. |
Keywords: Snapshot tool, lscpi | |
Detected in version: 2.50.50000 | |
Fixed in version: 2.50.51000 | |
2294165 | Description: Fixed an issue that resulted in VF corruption when multiple VFs were revoked concurrently from the PF. |
Keywords: VF | |
Detected in version: 2.50.50000 | |
Fixed in version: 2.50.51000 | |
2143037 | Description: Fixed an issue that caused the QoS priority counter to increase by 1 when TxUntagPriorityTag was enabled. |
Keywords: QoS counters | |
Detected in version: 2.20 | |
Fixed in version: 2.50.51000 | |
2281985 / 2294163 | Description: Added protection to enable/disable multiple network adapters simultaneously. |
Keywords: [mlx5] CDriver | |
Detected in version: 2.50.50000 | |
Fixed in version: 2.50.51000 | |
2247958 | Description: The descriptions of the Mellanox WinOf-2 Diagnostics Ext 1 counters are inaccurate, For the updated description, refer to the User Manual --> Adapter Cards Counters --> Mellanox WinOf-2 Diagnostics Ext 1. |
Keywords: TCP QOS | |
Detected in version: 2.40.50000 | |
Fixed in version: 2.50.51000 | |
2081797 | Description: Fixed a potential performance degradation when both transmit and receive processing occurred on same core when running bidirectional traffic. |
Keywords: RFC2544 | |
Detected in version: 2.40.50000 | |
Fixed in version: 2.50.50000 | |
2233067 | Description: Fixed an issue that caused a BSOD when running "mlx5cmd -ndstat" while the ND connection was closing. |
Keywords: ND, BSOD, mlx5cmd | |
Detected in version: 2.40.50000 | |
Fixed in version: 2.50.50000 | |
2196387 | Description: Fixed the following inaccurate event log message that appeared when the NIC was installed on an old GEN PCIe slot: Event ID 0x191 PCIe width/speed doesn't match expected value. |
Keywords: Even log | |
Detected in version: 2.40.50000 | |
Fixed in version: 2.50.50000 | |
2235059 | Description: Fixed a crash that occurred due to a race between the SM disconnect action and a multicast join/leave handling action. |
Keywords: IPoIB, Multicast,race, crash | |
Detected in version: 2.40.50000 | |
Fixed in version: 2.50.50000 | |
1977489 | Description: The “Available PCI BW" and "Used PCI BW" counters display wrong information. |
Keywords: Counters | |
Detected in version: 2.40.50000 | |
Fixed in version: 2.50.50000 | |
2091921 | Description: Running NonRss Sniffer with Packet Direct while toggling the RSS On/Off can cause BSOD in Disabling the device when PdRssOn failed due to Device in Error state. |
Keywords: RSS | |
Detected in version: 2.40.50000 | |
Fixed in version: 2.50.50000 | |
2096149 | Description: Mellanox Device Diagnostics counters do not function properly when using a NIC with two adapters in the following flow: 1. Enable adapter 1 The counters for adapter #2 will stop working and the following error message will be shown in the event log for command failure: <adapter name>: FW command fails. op 0x821, status 0x4, errno -5, syndrome 0x993ca6. |
Keywords: Mellanox Device Diagnostics counters | |
Detected in version: 2.40.50000 | |
Fixed in version: 2.50.50000 | |
2172748 | Description: Added support for SFP Module info reports. |
Keywords: Module info reports | |
Detected in version: 2.40.51000 | |
Fixed in version: 2.50.50000 | |
2203675 | Description: Fixed an issue that resulted in driver load failure in Windows containers. The driver INF file included the machine.inf and not the pci.inf. Note: machine.inf is available only in desktop. |
Keywords: Driver load failure | |
Detected in version: 2.40.51000 | |
Fixed in version: 2.50.50000 | |
2208551 | Description: As the driver does not expect zero sized MDLs, its behavior was modified to skip zero sized MDLs. |
Keywords: FastSge | |
Detected in version: 2.40.51000 | |
Fixed in version: 2.50.50000 | |
2178395 | Description: Fixed an issue that occasionally caused the system to crash due to a race between the DMN and the shutdown process. |
Keywords: DMN | |
Detected in version: 2.40.51000 | |
Fixed in version: 2.50.50000 | |
2107824 | Description: Fixed an issue that caused a stuck EQ that used the cmd interface to generate an EQ stuck event to the event log. |
Keywords: cmd, EQ | |
Detected in version: 2.40.51000 | |
Fixed in version: 2.50.50000 | |
2193380 | Description: Fixed an issue that caused unset dynamic registry keys displaying the value "Unset" instead of a number when using Mlx5Cmd -RegKeys. |
Keywords: Dynamic Registry Keys | |
Detected in version: 2.40.51000 | |
Fixed in version: 2.50.50000 | |
2186275 | Description: Changed the default of supported DMN Masks such that it ignores VMQoS. |
Keywords: DMN, VMQoS | |
Detected in version: 2.40.51000 | |
Fixed in version: 2.50.50000 | |
2182044 | Description: Modified the driver's behavior to restore to default values when invalid values are configured dynamically. |
Keywords: DMN | |
Detected in version: 2.40.51000 | |
Fixed in version: 2.50.50000 | |
2178567 | Description: Fixed an issue that caused mlx5cmd to display incorrect values for DMN keys, and incorrect event log message on dynamic keys changes, when setting invalid value for DMN registry keys dynamically. |
Keywords: DMN | |
Detected in version: 2.40.51000 | |
Fixed in version: 2.50.50000 | |
2175583 | Description: Removed the option to print Cable module information to the VF. |
Keywords: Cables, VF | |
Detected in version: 2.40.51000 | |
Fixed in version: 2.50.50000 | |
2166067 | Description: Fixed an issue that created empty folders when Dump-Me-Now was enabled but DumpMeNowDumpMask was set to 0. |
Keywords: DMN | |
Detected in version: 2.40.51000 | |
Fixed in version: 2.50.50000 | |
2164801 | Description: Fixed an issue that generated empty folders when only Core dump was configured. |
Keywords: DMN | |
Detected in version: 2.40.51000 | |
Fixed in version: 2.50.50000 | |
2145645 | Description: Updated the minimum MTU size to 600 for IPoIB. |
Keywords: MTU, IPoIB | |
Detected in version: 2.40.51000 | |
Fixed in version: 2.50.50000 | |
2136172 | Description: Fixed an issue that caused PDDR Operational Info to show "Enabled manager link width" and "Enabled core to PHY link width" as Unknown. |
Keywords: PDDR | |
Detected in version: 2.40.51000 | |
Fixed in version: 2.50.50000 | |
2110618 | Description: Updated Mlx5Cmd Sniffer behavior to display the location/name of the pcap file. |
Keywords: Mlx5Cmd Sniffer | |
Detected in version: 2.40.51000 | |
Fixed in version: 2.50.50000 | |
2102267 | Description: Added a unit for "PCI link speed" under the "Mellanox WinOF-2 PCI Device Diagnostics" performance counter. |
Keywords: Performance counter | |
Detected in version: 2.40.51000 | |
Fixed in version: 2.50.50000 | |
2098237 | Description: Fixed a wrong output DMN path name. The "Mlx5Cmd.exe -Dmn" command showed the default path name like as "\SystemRoot\temp.." instead of "%SystemRoot%\temp\..". |
Keywords: DMN | |
Detected in version: 2.40.51000 | |
Fixed in version: 2.50.50000 | |
2064337 | Description: Fixed an issue where the actual file size of pcap files was greater than the intended file size specified by the user. Removed the buffer_size argument as a user input. |
Keywords: pcap files | |
Detected in version: 2.40.51000 | |
Fixed in version: 2.50.50000 | |
1859854 | Description: Fixed an issue that limited the number of VMs to 124 VMs when working in VMQ mode. |
Keywords: Virtualization | |
Detected in version: 2.10 | |
Fixed in version: | |
1978788 | Description: Due to memory allocation issue, an issue with the MST dump might occur. |
Keywords: MST dump memory allocation | |
Detected in version: 2.40.50000 | |
Fixed in version: 2.50.50000 | |
2088202 | Description: The mlx5cmd FwCaps dumps the MAXIMUM values that can be used by the VF and the CURRENT values set in the PF/SR-IOV VM instead of the CURRENT capabilities of the VF from the host as well and the MAXIMUM values of the host. |
Keywords: FwCaps | |
Detected in version: 2.40.50000 | |
Fixed in version: 2.50.50000 | |
2091921 | Description: Running NonRss Sniffer with Packet Direct while toggling the RSS On/Off can cause a BSOD during the adapter disabling. |
Keywords: RSS | |
Detected in version: 2.40.50000 | |
Fixed in version: 2.50.50000 | |
2092544 / 2090352 | Description: Incorrect *JumboPacket values (Min, Max and Default) for IPoIB when runningmlx5cmd"-regkeys". |
Keywords: JumboPacket | |
Detected in version: 2.40.50000 | |
Fixed in version: 2.50.50000 | |
2112047 | Description: A race might occur between the delete vPort and the DMN execution that occasionally may lead to BSOD when resiliency is enabled. |
Keywords: vPort, Dump-Me-Now (DMN), resiliency | |
Detected in version: 2.40.51000 | |
Fixed in version: 2.50.50000 | |
2120059 | Description: IP-in-IP Checksum offload is not functional when working with VLANs. |
Keywords: IP-in-IP Checksum offload, VLAN | |
Detected in version: 2.40.51000 | |
Fixed in version: 2.50.50000 | |
2164141 | Description: Fixed an issue in DMN, that occasionally caused a system crash when driver startup failed, due to double free. |
Keywords: DMN | |
Detected in version: 2.40.51000 | |
Fixed in version: 2.50.50000 | |
2177323 | Description: Improved stuck transmit queue detection. Now it does not report stuck queues in case there is a TX DPC queued. |
Keywords: Resiliency | |
Detected in version: 2.40.51000 | |
Fixed in version: 2.50.50000 | |
2175147 | Description: Fixed the "mlx5cmd -DMN" command return value to display a "Not supported" status when DMN is disabled. |
Keywords: DMN | |
Detected in version: 2.40.51000 | |
Fixed in version: 2.50.50000 | |
2096149 | Description: Fixed the Device Diagnostic counters to function properly in the following flow:
|
Keywords: Device Diagnostic counters | |
Detected in version: 2.40.50000 | |
Fixed in version: 2.40.51000 | |
2081797 | Description: Fixed a potential performance degradation when both transmit and receive processing occurred on same core when running bidirectional traffic. |
Keywords: RFC2544 | |
Detected in version: 2.40.50000 | |
Fixed in version: 2.40.51000 | |
2113541 | Description: Fixed a race between adding the vPort and the DMN execution, that occasionally led to BSOD when resiliency was enabled. |
Keywords: vPort, Dump-Me-Now (DMN), resiliency | |
Detected in version: 2.40.50000 | |
Fixed in version: 2.40.51000 | |
1859854 | Description: When working in VMQ mode, the number of VMs is limited to 124 VMs. Whereas when in SRI-OV, the driver supports up to 200 vPorts in ConnectX-4 Lx and 254 vPorts in ConnectX-5. |
Keywords: Virtualization | |
Detected in version: 2.30.50000 | |
Fixed in version: 2.40.50000 | |
1997898 | Description: Resiliency flow takes more than a minute when using CMD_TOUT as the writing of the file is done only in the mstdump destruction (Teardown), a process that can take time depending on the setup configuration and state. |
Keywords: Resiliency | |
Detected in version: 2.30.50000 | |
Fixed in version: 2.40.50000 | |
2001908 | Description: Changed the default name of the trace file. The default name will be the driver's service name + Trace.etl. For example: mlnx5Trace.etl, mlx5Trace.etl, etc. |
Keywords: Trace File | |
Detected in version: 2.30.50000 | |
Fixed in version: 2.40.50000 | |
2001954 | Description: Modified the information printed by the PDDR tool to differentiate between the supported cable speeds and the adapter supported speeds. |
Keywords: Pddrinfo | |
Detected in version: 2.30.50000 | |
Fixed in version: 2.40.50000 | |
2074477 | Description: Fixed the value of configured MTU showed in event log 53. |
Keywords: MTU | |
Detected in version: 2.30.50000 | |
Fixed in version: 2.40.50000 | |
2077195 | Description: Numbered the DMN folder, to allow the driver to see 2 or more events from the same source at the same second. As the DMN folder name consists of: hour-min-sec, it prevented the driver for seeing all the errors that were created at the same second under the DMN folder. |
Keywords: DMN | |
Detected in version: 2.30.50000 | |
Fixed in version: 2.40.50000 | |
1817808 | Description: Fixed an issue that caused memory corruption in case the OS provided continues memory across multiple pages that did not start with offset zero on aligned memory address. |
Keywords: ND | |
Detected in version: 2.30.50000 | |
Fixed in version: 2.40.50000 | |
2072336 | Description: Fixed an issue that prevented the device from being updated with the new driver because the driver was already in the driver store. |
Keywords: Driver installation | |
Detected in version: 2.30.50000 | |
Fixed in version: 2.40.50000 | |
1920768 | Description: Fixed an issue in Windows Server 2019 that occasionally prevented the VF counters from being displayed correctly in perfmon. |
Keywords: VF counters, perfmon, Windows Server 2019 | |
Detected in version: 2.30.50000 | |
Fixed in version: 2.40.50000 | |
1974372 | Description: Fixed a wrong usage prints in Mlx5CmdDbg, mlx5CmdRegKeys, Mlx5CmdOidStat, and Mlx5CmdMstDump. From "-bdf <pci-bus#> <pci-device#> <pci-function#>" to "-bdf <pci-bus#>.<pci-device#>.<pci-function#>" |
Keywords: mlx5Cmd | |
Detected in version: 2.30.50000 | |
Fixed in version: 2.40.50000 | |
1979255 | Description: Fixed an issue in the first ND connection that occurred as a result of a driver restart failure. |
Keywords: ND connection, restart | |
Detected in version: 2.30.50000 | |
Fixed in version: 2.40.50000 | |
2001945 | Description: Fixed an issue that prevented"mlx5cmd -stat" from showing the current link speed when the speed was not supported or setting the link speed if it was supported by both the device and the cable used. |
Keywords: Link speed | |
Detected in version: 2.30.50000 | |
Fixed in version: 2.40.50000 | |
2002667 | Description: Fixed an issue that prevented the driver from printing an informative message when ran "mlx5cmd -dbg -swreset" and the resiliency capability was not supported. |
Keywords: Resiliency | |
Detected in version: 2.30.50000 | |
Fixed in version: 2.40.50000 | |
2004368 | Description: Fixed an issue that displayed the Sniffer default file name as "mlx5sniffer.pcap", and not according to the driver name. |
Keywords: Sniffer | |
Detected in version: 2.30.50000 | |
Fixed in version: 2.40.50000 | |
2060026 | Description: Fixed a memory leak issue in error flow during driver initialization. |
Keywords: Memory leak | |
Detected in version: 2.30.50000 | |
Fixed in version: 2.40.50000 | |
2063808 | Description: Fixed an issue with the "mlx5cmd -linkspeed -query" command that showed empty link speeds supported by the cable when the link was down and a proper message was shown when the link was down. |
Keywords: mlx5cmd | |
Detected in version: 2.30.50000 | |
Fixed in version: 2.40.50000 | |
2065395 | Description: Fixed an issue that disabled other trusted VF capabilities whenever a host used a ConnectX-5 adapter card that supports Dynamic MSIX capability. |
Keywords: Dynamic MSIX, ConnectX-5, VFs | |
Detected in version: 2.30.50000 | |
Fixed in version: 2.40.50000 | |
2059845 | Description: Fixed an issue caused the driver to report zero link speeds supported when working with firmware older than 1x.18.0240. |
Keywords: Link speed | |
Detected in version: 2.30.50000 | |
Fixed in version: 2.40.50000 | |
1910180 | Description: ndinstall fails to run when using the "-d" or "-q" parameters. |
Keywords: ndinstall | |
Detected in version: 2.30.50000 | |
Fixed in version: 2.40.50000 | |
1913056 | Description: ndinstall does not handle invalid parameters correctly and can return incorrect status. |
Keywords: ndinstall | |
Detected in version: 2.30.50000 | |
Fixed in version: 2.40.50000 | |
1805026 | Description: When working in IPoIB mode, after restarting the device the following warning may appear in the event log:
The warning can be safely ignored, it is relevant only when working in Ethernet mode. |
Keywords: IB ,DCBX | |
Detected in version: 2.30.50000 | |
Fixed in Release: 2.30.51000 | |
- | Description: Fixed a corrupted file in the MUX driver package. |
Keywords: MUX driver | |
Detected in version: 2.30.50000 | |
Fixed in Release: 2.30.51000 | |
1890207/1813295 | Description: Fixed an issue where the number of MSI-X reported by the command "mlx5cmd -vfresource" on a Virtual Machine was wrong. |
Keywords: MSI-x, Virtual Function,VF, mlx5cmd | |
Detected in version: 2.20 | |
Fixed in Release: 2.30.50000 | |
1912810 | Description: Fixed an issue where the values of registry keys that can be changed dynamically were not included in get-netview report. |
Keywords: get-netview | |
Detected in version: 2.20 | |
Fixed in Release: 2.30.50000 | |
1887870 | Description: Fixed an issue that prevented the driver from enabling the VLAN or changing the VLAN ID when a VF was available on Windows Server 2019. |
Keywords: VLAN, SR-IOV | |
Detected in version: 2.20 | |
Fixed in Release: 2.30.50000 | |
1893083 | Description: [Windows Server 2019] Fixed an issue that set the WPP session ETL max file size according to the Inbox Driver WMI Autologger session registry key "MaxFileSize" value, when installed the driver on a clean image. |
Keywords: Driver Installation | |
Detected in version: 2.20 | |
Fixed in Release: 2.30.50000 | |
1870769/1829088 | Description: Disabled the option to issue an event log message when NDK is not supported by the OS. |
Keywords: NDK | |
Detected in version: 2.20 | |
Fixed in Release: 2.30.50000 | |
1805026 | Description: When working in IPoIB mode, after restarting the driver the following warning will be shown in the event log:
The warning can be safely ignored, no action is required. |
Keywords: IB ,DCQCN | |
Detected in version: 2.20 | |
Fixed in Release: 2.30.50000 | |
1629926 | Description: In some cases, when upgrading the driver, the user will see in the Device Manager a message that requires rebooting the driver. The issue happens due to a change in Windows Server 2019. The issue occurs due to the fact that after the driver is installed, the devices are restarted and then checked to ensure they are ready to be used. If they are not ready, they are marked as needing reboot. In Windows Server 2019, this function was overhauled a bit and it is now executed too quickly, although the driver installation is completed, the networking stack is still finishing up its configuration of the device. This causes PNP to think the device did not start up properly and tags it as needing reboot. |
Keywords: Windows Server 2019, Driver upgrade, reboot | |
Detected in version: 2.10 | |
Fixed in Release: 2.30.50000 |