Performance Analyzer#

A critical part of optimizing the inference performance of your model is being able to measure changes in performance as you experiment with different optimization strategies. The perf_analyzer application (previously known as perf_client) performs this task for the Triton Inference Server. The perf_analyzer is included with the client examples which are available from several sources.

The perf_analyzer application generates inference requests to your model and measures the throughput and latency of those requests. To get representative results, perf_analyzer measures the throughput and latency over a time window, and then repeats the measurements until it gets stable values. By default perf_analyzer uses average latency to determine stability but you can use the –percentile flag to stabilize results based on that confidence level. For example, if –percentile=95 is used the results will be stabilized using the 95-th percentile request latency. For example,

$ perf_analyzer -m inception_graphdef --percentile=95
*** Measurement Settings ***
  Batch size: 1
  Measurement window: 5000 msec
  Using synchronous calls for inference
  Stabilizing using p95 latency

Request concurrency: 1
  Client:
    Request count: 348
    Throughput: 69.6 infer/sec
    p50 latency: 13936 usec
    p90 latency: 18682 usec
    p95 latency: 19673 usec
    p99 latency: 21859 usec
    Avg HTTP time: 14017 usec (send/recv 200 usec + response wait 13817 usec)
  Server:
    Inference count: 428
    Execution count: 428
    Successful request count: 428
    Avg request latency: 12005 usec (overhead 36 usec + queue 42 usec + compute input 164 usec + compute infer 11748 usec + compute output 15 usec)

Inferences/Second vs. Client p95 Batch Latency
Concurrency: 1, throughput: 69.6 infer/sec, latency 19673 usec

Request Concurrency#

By default perf_analyzer measures your model’s latency and throughput using the lowest possible load on the model. To do this perf_analyzer sends one inference request to Triton and waits for the response. When that response is received, the perf_analyzer immediately sends another request, and then repeats this process during the measurement windows. The number of outstanding inference requests is referred to as the request concurrency, and so by default perf_analyzer uses a request concurrency of 1.

Using the –concurrency-range <start>:<end>:<step> option you can have perf_analyzer collect data for a range of request concurrency levels. Use the –help option to see complete documentation for this and other options. For example, to see the latency and throughput of your model for request concurrency values from 1 to 4:

$ perf_analyzer -m inception_graphdef --concurrency-range 1:4
*** Measurement Settings ***
  Batch size: 1
  Measurement window: 5000 msec
  Latency limit: 0 msec
  Concurrency limit: 4 concurrent requests
  Using synchronous calls for inference
  Stabilizing using average latency

Request concurrency: 1
  Client:
    Request count: 339
    Throughput: 67.8 infer/sec
    Avg latency: 14710 usec (standard deviation 2539 usec)
    p50 latency: 13665 usec
...
Request concurrency: 4
  Client:
    Request count: 415
    Throughput: 83 infer/sec
    Avg latency: 48064 usec (standard deviation 6412 usec)
    p50 latency: 47975 usec
    p90 latency: 56670 usec
    p95 latency: 59118 usec
    p99 latency: 63609 usec
    Avg HTTP time: 48166 usec (send/recv 264 usec + response wait 47902 usec)
  Server:
    Inference count: 498
    Execution count: 498
    Successful request count: 498
    Avg request latency: 45602 usec (overhead 39 usec + queue 33577 usec + compute input 217 usec + compute infer 11753 usec + compute output 16 usec)

Inferences/Second vs. Client Average Batch Latency
Concurrency: 1, throughput: 67.8 infer/sec, latency 14710 usec
Concurrency: 2, throughput: 89.8 infer/sec, latency 22280 usec
Concurrency: 3, throughput: 80.4 infer/sec, latency 37283 usec
Concurrency: 4, throughput: 83 infer/sec, latency 48064 usec

Understanding The Output#

For each request concurrency level perf_analyzer reports latency and throughput as seen from the client (that is, as seen by perf_analyzer) and also the average request latency on the server.

The server latency measures the total time from when the request is received at the server until the response is sent from the server. Because of the HTTP and GRPC libraries used to implement the server endpoints, total server latency is typically more accurate for HTTP requests as it measures time from first byte received until last byte sent. For both HTTP and GRPC the total server latency is broken-down into the following components:

queue: The average time spent in the inference schedule queue by a request waiting for an instance of the model to become available.
compute: The average time spent performing the actual inference, including any time needed to copy data to/from the GPU.

The client latency time is broken-down further for HTTP and GRPC as follows:

HTTP: send/recv indicates the time on the client spent sending the request and receiving the response. response wait indicates time waiting for the response from the server.
GRPC: (un)marshal request/response indicates the time spent marshalling the request data into the GRPC protobuf and unmarshalling the response data from the GRPC protobuf. response wait indicates time writing the GRPC request to the network, waiting for the response, and reading the GRPC response from the network.

Use the verbose (-v) option to perf_analyzer to see more output, including the stabilization passes run for each request concurrency level.

Visualizing Latency vs. Throughput#

The perf_analyzer provides the -f option to generate a file containing CSV output of the results.

$ perf_analyzer -m inception_graphdef --concurrency-range 1:4 -f perf.csv
$ cat perf.csv
Concurrency,Inferences/Second,Client Send,Network+Server Send/Recv,Server Queue,Server Compute Input,Server Compute Infer,Server Compute Output,Client Recv,p50 latency,p90 latency,p95 latency,p99 latency
1,69.2,225,2148,64,206,11781,19,0,13891,18795,19753,21018
3,84.2,237,1768,21673,209,11742,17,0,35398,43984,47085,51701
4,84.2,279,1604,33669,233,11731,18,1,47045,56545,59225,64886
2,87.2,235,1973,9151,190,11346,17,0,21874,28557,29768,34766

NOTE: The rows in the CSV file are sorted in an increasing order of throughput (Inferences/Second).

You can import the CSV file into a spreadsheet to help visualize the latency vs inferences/second tradeoff as well as see some components of the latency. Follow these steps:

Open this spreadsheet
Make a copy from the File menu “Make a copy…”
Open the copy
Select the A1 cell on the “Raw Data” tab
From the File menu select “Import…”
Select “Upload” and upload the file
Select “Replace data at selected cell” and then select the “Import data” button

Server-side Prometheus metrics#

Perf Analyzer can collect server-side metrics, such as GPU utilization and GPU power usage. To enable the collection of these metrics, use the --collect-metrics CLI option.

Perf Analyzer defaults to access the metrics endpoint at localhost:8002/metrics. If the metrics are accessible at a different url, use the --metrics-url <url> CLI option to specify that.

Perf Analyzer defaults to access the metrics endpoint every 1000 milliseconds. To use a different accessing interval, use the --metrics-interval <interval> CLI option (specify in milliseconds).

Because Perf Analyzer can collect the server-side metrics multiple times per run, these metrics are aggregated in specific ways to produce one final number per sweep (concurrency/request rate). Here are how they are aggregated:

Metric	Aggregation
GPU Utilization	Averaged from each collection taken during stable passes. We want a number representative of all stable passes.
GPU Power Usage	Averaged from each collection taken during stable passes. We want a number representative of all stable passes.
GPU Used Memory	Maximum from all collections taken during a stable pass. Users are typically curious what the peak memory usage is for determining model/hardware viability.
GPU Total Memory	First from any collection taken during a stable pass. All of the collections should produce the same value for total memory available on the GPU.

Note that all metrics are per-GPU in the case of multi-GPU systems.

To output these server-side metrics to a CSV file, use the -f <filename> and --verbose-csv CLI options. The output CSV will contain one column per metric. The value of each column will be a key:value pair (GPU UUID:metric value). Each key:value pair will be delimited by a semicolon (;) to indicate metric values for each GPU accessible by the server. There is a trailing semicolon. See below:

<gpu-uuid-0>:<metric-value>;<gpu-uuid-1>:<metric-value>;...;

Here is a simplified CSV output:

$ perf_analyzer -m resnet50_libtorch --collect-metrics -f output.csv --verbose-csv
$ cat output.csv
Concurrency,...,Avg GPU Utilization,Avg GPU Power Usage,Max GPU Memory Usage,Total GPU Memory
1,...,gpu_uuid_0:0.33;gpu_uuid_1:0.5;,gpu_uuid_0:55.3;gpu_uuid_1:56.9;,gpu_uuid_0:10000;gpu_uuid_1:11000;,gpu_uuid_0:50000;gpu_uuid_1:75000;,
2,...,gpu_uuid_0:0.25;gpu_uuid_1:0.6;,gpu_uuid_0:25.6;gpu_uuid_1:77.2;,gpu_uuid_0:11000;gpu_uuid_1:17000;,gpu_uuid_0:50000;gpu_uuid_1:75000;,
3,...,gpu_uuid_0:0.87;gpu_uuid_1:0.9;,gpu_uuid_0:87.1;gpu_uuid_1:71.7;,gpu_uuid_0:15000;gpu_uuid_1:22000;,gpu_uuid_0:50000;gpu_uuid_1:75000;,

Input Data#

Use the –help option to see complete documentation for all input data options. By default perf_analyzer sends random data to all the inputs of your model. You can select a different input data mode with the –input-data option:

random: (default) Send random data for each input.
zero: Send zeros for each input.
directory path: A path to a directory containing a binary file for each input, named the same as the input. Each binary file must contain the data required for that input for a batch-1 request. Each file should contain the raw binary representation of the input in row-major order.
file path: A path to a JSON file containing data to be used with every inference request. See the “Real Input Data” section for further details. –input-data can be provided multiple times with different file paths to specific multiple JSON files.

For tensors with with STRING/BYTES datatype there are additional options –string-length and –string-data that may be used in some cases (see –help for full documentation).

For models that support batching you can use the -b option to indicate the batch-size of the requests that perf_analyzer should send. For models with variable-sized inputs you must provide the –shape argument so that perf_analyzer knows what shape tensors to use. For example, for a model that has an input called IMAGE that has shape [ 3, N, M ], where N and M are variable-size dimensions, to tell perf_analyzer to send batch-size 4 requests of shape [ 3, 224, 224 ]:

$ perf_analyzer -m mymodel -b 4 --shape IMAGE:3,224,224

Real Input Data#

The performance of some models is highly dependent on the data used. For such cases you can provide data to be used with every inference request made by analyzer in a JSON file. The perf_analyzer will use the provided data in a round-robin order when sending inference requests.

Each entry in the “data” array must specify all input tensors with the exact size expected by the model from a single batch. The following example describes data for a model with inputs named, INPUT0 and INPUT1, shape [4, 4] and data type INT32:

  {
    "data" :
     [
        {
          "INPUT0" : [1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1],
          "INPUT1" : [1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1]
        },
        {
          "INPUT0" : [1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1],
          "INPUT1" : [1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1]
        },
        {
          "INPUT0" : [1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1],
          "INPUT1" : [1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1]
        },
        {
          "INPUT0" : [1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1],
          "INPUT1" : [1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1]
        }
        ...
      ]
  }

Note that the [4, 4] tensor has been flattened in a row-major format for the inputs. In addition to specifying explicit tensors, you can also provide Base64 encoded binary data for the tensors. Each data object must list its data in a row-major order. Binary data must be in little-endian byte order. The following example highlights how this can be acheived:

  {
    "data" :
     [
        {
          "INPUT0" : {"b64": "YmFzZTY0IGRlY29kZXI="},
          "INPUT1" : {"b64": "YmFzZTY0IGRlY29kZXI="}
        },
        {
          "INPUT0" : {"b64": "YmFzZTY0IGRlY29kZXI="},
          "INPUT1" : {"b64": "YmFzZTY0IGRlY29kZXI="}
        },
        {
          "INPUT0" : {"b64": "YmFzZTY0IGRlY29kZXI="},
          "INPUT1" : {"b64": "YmFzZTY0IGRlY29kZXI="}
        },
        ...
      ]
  }

In case of sequence models, multiple data streams can be specified in the JSON file. Each sequence will get a data stream of its own and the analyzer will ensure the data from each stream is played back to the same correlation id. The below example highlights how to specify data for multiple streams for a sequence model with a single input named INPUT, shape [1] and data type STRING:

  {
    "data" :
      [
        [
          {
            "INPUT" : ["1"]
          },
          {
            "INPUT" : ["2"]
          },
          {
            "INPUT" : ["3"]
          },
          {
            "INPUT" : ["4"]
          }
        ],
        [
          {
            "INPUT" : ["1"]
          },
          {
            "INPUT" : ["1"]
          },
          {
            "INPUT" : ["1"]
          }
        ],
        [
          {
            "INPUT" : ["1"]
          },
          {
            "INPUT" : ["1"]
          }
        ]
      ]
  }

The above example describes three data streams with lengths 4, 3 and 2 respectively. The perf_analyzer will hence produce sequences of length 4, 3 and 2 in this case.

You can also provide an optional “shape” field to the tensors. This is especially useful while profiling the models with variable-sized tensors as input. Additionally note that when providing the “shape” field, tensor contents must be provided separately in “content” field in row-major order. The specified shape values will override default input shapes provided as a command line option (see –shape) for variable-sized inputs. In the absence of “shape” field, the provided defaults will be used. There is no need to specify shape as a command line option if all the data steps provide shape values for variable tensors. Below is an example json file for a model with single input “INPUT”, shape [-1,-1] and data type INT32:

  {
    "data" :
     [
        {
          "INPUT" :
                {
                    "content": [1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1],
                    "shape": [2,8]
                }
        },
        {
          "INPUT" :
                {
                    "content": [1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1],
                    "shape": [8,2]
                }
        },
        {
          "INPUT" :
                {
                    "content": [1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1]
                }
        },
        {
          "INPUT" :
                {
                    "content": [1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1],
                    "shape": [4,4]
                }
        }
        ...
      ]
  }

The following is the example to provide contents as base64 string with explicit shapes:

{
  "data": [{ 
      "INPUT": {
                 "content": {"b64": "/9j/4AAQSkZ(...)"},
                 "shape": [7964]
               }},
    (...)]
}

Note that for STRING type an element is represented by a 4-byte unsigned integer giving the length followed by the actual bytes. The byte array to be encoded using base64 must include the 4-byte unsigned integers.

Output Validation#

When real input data is provided, it is optional to request perf analyzer to validate the inference output for the input data.

Validation output can be specified in “validation_data” field in the same format as “data” field for real input. Note that the entries in “validation_data” must align with “data” for proper mapping. The following example describes validation data for a model with inputs named, INPUT0 and INPUT1, outputs named, OUTPUT0 and OUTPUT1, all tensors have shape [4, 4] and data type INT32:

  {
    "data" :
     [
        {
          "INPUT0" : [1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1],
          "INPUT1" : [1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1]
        }
        ...
      ],
    "validation_data" :
     [
        {
          "OUTPUT0" : [0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0],
          "OUTPUT1" : [2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2]
        }
        ...
      ]
  }

Besides the above example, the validation outputs can be specified in the same variations described in “real input data” section.

Shared Memory#

By default perf_analyzer sends input tensor data and receives output tensor data over the network. You can instead instruct perf_analyzer to use system shared memory or CUDA shared memory to communicate tensor data. By using these options you can model the performance that you can achieve by using shared memory in your application. Use –shared-memory=system to use system (CPU) shared memory or –shared-memory=cuda to use CUDA shared memory.

Communication Protocol#

By default perf_analyzer uses HTTP to communicate with Triton. The GRPC protocol can be specificed with the -i option. If GRPC is selected the –streaming option can also be specified for GRPC streaming.

SSL/TLS Support#

perf_analyzer can be used to benchmark Triton service behind SSL/TLS-enabled endpoints. These options can help in establishing secure connection with the endpoint and profile the server.

For gRPC, see the following options:

--ssl-grpc-use-ssl
--ssl-grpc-root-certifications-file
--ssl-grpc-private-key-file
--ssl-grpc-certificate-chain-file

More details here: https://grpc.github.io/grpc/cpp/structgrpc_1_1_ssl_credentials_options.html

The inference protocol gRPC SSL/TLS section describes server-side options to configure SSL/TLS in Triton’s gRPC endpoint.

For HTTPS, the following options are exposed:

--ssl-https-verify-peer
--ssl-https-verify-host
--ssl-https-ca-certificates-file
--ssl-https-client-certificate-file
--ssl-https-client-certificate-type
--ssl-https-private-key-file
--ssl-https-private-key-type

See --help for full documentation.

Unlike gRPC, Triton’s HTTP server endpoint can not be configured with SSL/TLS support.

Note: Just providing these --ssl-http-* options to perf_analyzer does not ensure the SSL/TLS is used in communication. If SSL/TLS is not enabled on the service endpoint, these options have no effect. The intent of exposing these options to a user of perf_analyzer is to allow them to configure perf_analyzer to benchmark Triton service behind SSL/TLS-enabled endpoints. In other words, if Triton is running behind a HTTPS server proxy, then these options would allow perf_analyzer to profile Triton via exposed HTTPS proxy.

Benchmarking Triton directly via C API#

Besides using HTTP or gRPC server endpoints to communicate with Triton, perf_analyzer also allows user to benchmark Triton directly using C API. HTTP/gRPC endpoints introduce an additional latency in the pipeline which may not be of interest to the user who is using Triton via C API within their application. Specifically, this feature is useful to benchmark bare minimum Triton without additional overheads from HTTP/gRPC communication.

Prerequisite#

Pull the Triton SDK and the Inference Server container images on target machine. Since you will need access to the Tritonserver install, it might be easier if you copy the perf_analyzer binary to the Inference Server container.

Required Parameters#

Use the –help option to see complete list of supported command line arguments. By default perf_analyzer expects the Triton instance to already be running. You can configure the C API mode using the --service-kind option. In additon, you will need to point perf_analyzer to the Triton server library path using the --triton-server-directory option and the model repository path using the --model-repository option. If the server is run successfully, there is a prompt: “server is alive!” and perf_analyzer will print the stats, as normal. An example run would look like:

perf_analyzer -m graphdef_int32_int32_int32 --service-kind=triton_c_api --triton-server-directory=/opt/tritonserver --model-repository=/workspace/qa/L0_perf_analyzer_capi/models

Non-supported functionalities#

There are a few functionalities that are missing from the C API. They are:

Async mode (-a)
Using shared memory mode (--shared-memory=cuda or --shared-memory=system)
Request rate range mode
For additonal known non-working cases, please refer to qa/L0_perf_analyzer_capi/test.sh

Benchmarking TensorFlow Serving#

perf_analyzer can also be used to benchmark models deployed on TensorFlow Serving using the --service-kind option. The support is however only available through gRPC protocol.

Following invocation demonstrates how to configure perf_analyzer to issue requests to a running instance of tensorflow_model_server:

$ perf_analyzer -m resnet50 --service-kind tfserving -i grpc -b 1 -p 5000 -u localhost:8500
*** Measurement Settings ***
  Batch size: 1
  Using "time_windows" mode for stabilization
  Measurement window: 5000 msec
  Using synchronous calls for inference
  Stabilizing using average latency
Request concurrency: 1
  Client: 
    Request count: 829
    Throughput: 165.8 infer/sec
    Avg latency: 6032 usec (standard deviation 569 usec)
    p50 latency: 5863 usec
    p90 latency: 6655 usec
    p95 latency: 6974 usec
    p99 latency: 8093 usec
    Avg gRPC time: 5984 usec ((un)marshal request/response 257 usec + response wait 5727 usec)
Inferences/Second vs. Client Average Batch Latency
Concurrency: 1, throughput: 165.8 infer/sec, latency 6032 usec

You might have to specify a different url(-u) to access wherever the server is running. The report of perf_analyzer will only include statistics measured at the client-side.

NOTE: The support is still in beta. perf_analyzer does not guarantee optimum tuning for TensorFlow Serving. However, a single benchmarking tool that can be used to stress the inference servers in an identical manner is important for performance analysis.

The following points are important for interpreting the results:

Concurrent Request Execution: TensorFlow Serving (TFS), as of version 2.8.0, by default creates threads for each request that individually submits requests to TensorFlow Session. There is a resource limit on the number of concurrent threads serving requests. When benchmarking at a higher request concurrency, you can see higher throughput because of this.
Unlike TFS, by default Triton is configured with only a single instance count. Hence, at a higher request concurrency, most of the requests are blocked on the instance availability. To configure Triton to behave like TFS, set the instance count to a reasonably high value and then set MAX_SESSION_SHARE_COUNT parameter in the model confib.pbtxt to the same value.For some context, the TFS sets its thread constraint to four times the num of schedulable CPUs.
Different library versions: The version of TensorFlow might differ between Triton and TensorFlow Serving being benchmarked. Even the versions of cuda libraries might differ between the two solutions. The performance of models can be susceptible to the versions of these libraries. For a single request concurrency, if the compute_infer time reported by perf_analyzer when benchmarking Triton is as large as the latency reported by perf_analyzer when benchmarking TFS, then the performance difference is likely because of the difference in the software stack and outside the scope of Triton.
CPU Optimization: TFS has separate builds for CPU and GPU targets. They have target-specific optimization. Unlike TFS, Triton has a single build which is optimized for execution on GPUs. When collecting performance on CPU models on Triton, try running Triton with the environment variable TF_ENABLE_ONEDNN_OPTS=1.

Benchmarking TorchServe#

perf_analyzer can also be used to benchmark TorchServe using the --service-kind option. The support is however only available through HTTP protocol. It also requires input to be provided via JSON file.

Following invocation demonstrates how to configure perf_analyzer to issue requests to a running instance of torchserve assuming the location holds kitten_small.jpg:

$ perf_analyzer -m resnet50 --service-kind torchserve -i http -u localhost:8080 -b 1 -p 5000 --input-data data.json
 Successfully read data for 1 stream/streams with 1 step/steps.
*** Measurement Settings ***
  Batch size: 1
  Using "time_windows" mode for stabilization
  Measurement window: 5000 msec
  Using synchronous calls for inference
  Stabilizing using average latency
Request concurrency: 1
  Client: 
    Request count: 799
    Throughput: 159.8 infer/sec
    Avg latency: 6259 usec (standard deviation 397 usec)
    p50 latency: 6305 usec
    p90 latency: 6448 usec
    p95 latency: 6494 usec
    p99 latency: 7158 usec
    Avg HTTP time: 6272 usec (send/recv 77 usec + response wait 6195 usec)
Inferences/Second vs. Client Average Batch Latency
Concurrency: 1, throughput: 159.8 infer/sec, latency 6259 usec

The content of data.json:

 {
   "data" :
    [
       {
         "TORCHSERVE_INPUT" : ["kitten_small.jpg"]
       }
     ]
 }

You might have to specify a different url(-u) to access wherever the server is running. The report of perf_analyzer will only include statistics measured at the client-side.

NOTE: The support is still in beta. perf_analyzer does not guarantee optimum tuning for TorchServe. However, a single benchmarking tool that can be used to stress the inference servers in an identical manner is important for performance analysis.

Advantages of using Perf Analyzer over third-party benchmark suites#

Triton Inference Server offers the entire serving solution which includes client libraries that are optimized for Triton. Using third-party benchmark suites like jmeter fails to take advantage of the optimized libraries. Some of these optimizations includes but are not limited to:

Using binary tensor data extension with HTTP requests.
Effective re-use of gRPC message allocation in subsequent requests.
Avoiding extra memory copy via libcurl interface.

These optimizations can have a tremendous impact on overall performance. Using perf_analyzer for benchmarking directly allows a user to access these optimizations in their study.

Not only that, perf_analyzer is also very customizable and supports many Triton features as described in this document. This, along with a detailed report, allows a user to identify performance bottlenecks and experiment with different features before deciding upon what works best for them.

NVIDIA Triton Inference Server

Performance Analyzer

Contents

Performance Analyzer#

Request Concurrency#

Understanding The Output#

Visualizing Latency vs. Throughput#

Server-side Prometheus metrics#

Input Data#

Real Input Data#

Output Validation#

Shared Memory#

Communication Protocol#

SSL/TLS Support#

Benchmarking Triton directly via C API#

Prerequisite#

Required Parameters#

Non-supported functionalities#

Benchmarking TensorFlow Serving#

Benchmarking TorchServe#

Advantages of using Perf Analyzer over third-party benchmark suites#