|
Internal Ref. |
Issue |
|
3629562 |
Description: Fixed a code mismatch in the process of handling the cause to the link being down when the remote faults were received. |
|
Keywords: Link down |
|
|
Discovered in Version: 32.38.1002 |
|
|
Fixed in Release: 32.38.3056 |
|
|
3602526 |
Description: Fixed an issue that led to packet drops on lossless fabric due to an Rx buffer overflow. |
|
Keywords: PFC |
|
|
Discovered in Version: 32.38.1002 |
|
|
Fixed in Release: 32.38.3056 |
|
|
3614448 |
Description: Fixed an issue that resulted in RoCE traffic showing significantly less throughput when the CC mode was enabled rather than disabled when using the LAG mode. |
|
Keywords: Bandwidth, LAG, CC |
|
|
Discovered in Version: 32.38.1002 |
|
|
Fixed in Release: 32.38.3056 |
|
|
3535284 |
Description: Fixed an issue related to sending loopback traffic when the Rate Limiter was enabled as it limited the user from having more than the wire speed. |
|
Keywords: Rate Limiter |
|
|
Discovered in Version: 32.38.1002 |
|
|
Fixed in Release: 32.38.3056 |
|
|
3556822 |
Description: Modified the CC events arriving flow to the PCC application to be received after the PCC application finishes information synchronization with the firmware when loading a new application. |
|
Keywords: DOCA PCC, Programmable Congestion Control, high availability |
|
|
Discovered in Version: 32.38.1002 |
|
|
Fixed in Release: 32.38.3056 |
|
|
3605649 |
Description: Fixed an issue related to SXP port VL rate limiter that resulted in bandwidth degradation. Additionally, cleared the token in SXD VL rate limiter, so when setting new rate during traffic the token will not get negative and stuck all outgoing bandwidth. |
|
Keywords: Rate Limiter, VL, bandwidth |
|
|
Discovered in Version: 32.38.1002 |
|
|
Fixed in Release: 32.38.3056 |
|
|
3583456 |
Description: Fixed an issue that caused the PCC DPA application to suffer from continuous communication failure due to retry asynchronous error. This issue resulted in PCC DPA application failure to start or mlxreg set/get PCC register failure. |
|
Keywords: DOCA PCC |
|
|
Discovered in Version: 32.38.1002 |
|
|
Fixed in Release: 32.38.3056 |
|
|
3580406 |
Description: Fixed an issue related to VFs performance throughput across multiple VF FLRs while using carveout pages. |
|
Keywords: Performance |
|
|
Discovered in Version: 32.38.1002 |
|
|
Fixed in Release: 32.38.3056 |
|
Internal Ref. |
Issue |
|
3506017 |
Description: Updated the firmware INI to enable MCTP over SMBUS and PCIe. |
|
Keywords: MCTP |
|
|
Discovered in Version: 32.37.1306 |
|
|
Fixed in Release: 32.38.1002 |
|
|
3331179 |
Description: Improved token calculation. |
|
Keywords: Token calculation |
|
|
Discovered in Version: 32.37.1306 |
|
|
Fixed in Release: 32.38.1002 |
|
|
3495889 |
Description: Fixed a QoS host port rate limit shaper inaccuracy that occurred when the shaper was configured via the QSHR access register. |
|
Keywords: Port rate limit shaper |
|
|
Discovered in Version: 32.37.1306 |
|
|
Fixed in Release: 32.38.1002 |
|
|
3432080 |
Description: Fixed a reburst issue. |
|
Keywords: Rate limit |
|
|
Discovered in Version: 32.37.1306 |
|
|
Fixed in Release: 32.38.1002 |
|
|
3432080 |
Description: Improved the grated2hw token calculation. |
|
Keywords: Rate limit (vQoS) |
|
|
Discovered in Version: 32.37.1306 |
|
|
Fixed in Release: 32.38.1002 |
|
|
3457472 |
Description: Disabling the Relaxed Ordered (RO) capability (relaxed_ordering_read_pci_enabled=0) using the vhca_resource_manager is currently not functional. |
|
Keywords: Relaxed Ordered |
|
|
Discovered in Version: 32.37.1306 |
|
|
Fixed in Release: 32.38.1002 |