Rev v23.04 – May 17, 2023

Updated:

• Section "BMC Management Interface" with new password requirements

• Section "Sensor Data Record (SDR) Repository"

• Link status codes to the p0_link and p1_link sensors in section "List of IPMI Supported Sensors"
• Section "BMC and CEC Firmware Update"

Added:

• Figure "NVIDIA® BlueField®-3 BMC Connector" to section "BMC Console Interface"

• Section "SEL Messages"
• Section "Updating BMC and Glacier Firmware with Vendor Field Mode" which is relevant for NVIDIA® BlueField®-3 DPU only
• Page "Serial Redirect Mode"
• Section "BlueField BMC Redfish Triggers"
• Command 0x32 0x92 and 0x32 0x93 to "NVIDIA Custom Commands" table

Rev 2.8.2-34 – October 21, 2022

Added:

• Page "Vendor Field Mode"
• Section "DPU Reset"

Updated:

• Section "Boot Order Config" with note on DPU boot override setting

Rev 2.8.2 – June 01, 2022

Updated:

• NIC thermal sensors line in table under section "SDR Entry List"

Rev 2.8.2 – April 04, 2022

Updated:

• Page "NVIDIA OEM Commands"

Rev 2.8.2 – January 04, 2022

Added:

• New password policy to:
  • Warning box in section "BMC Management Interface"
  • Section "Boot Sequence Overview"
  • Step 3 in section "User Management"
• Section "Changing Default Credentials Using bf.cfg"
• -C 17 argument to IPMItool lanplus commands

Updated:

• Section "User Management"
• Section "Reset Control"

Rev 2.8.2 – October 25, 2021

Updated:

• Section "Pushing Bootstream from BMC to BlueField-2 Arm"
• Section "BMC Management Interface" by removing mentions of interface eth1
• Page "NVIDIA OEM Commands"