Syntax Description

all

Clears all switch counters.

type

A specific interface type.

number

The interface number.

Default

N/A

Configuration Mode

config

History

Example

switch (config) # clear counters

Notes

 The command also clears storm-control counters

clear system hardware events 

Clears all active events.

Syntax Description

N/A 

Default

N/A

Configuration Mode

config

History

3.6.6000

Example

switch (config) # clear system hardware events

Related Commands

show system hardware events

Notes

health {max-report-len <length> | re-notif-cntr <counter> | report-clear}

Configures health daemon settings.

Syntax Description

max-report-len <length>

Sets the length of the health report (number of line entries)
Range: 10-2048

re-notif-cntr <counter>

Health control changes notification counter in seconds
Range: 120-7200

report-clear

Clears the health report

Default

max-report-len: 50
re-notif-cntr:

Configuration Mode

config

History

Example

switch (config) # health re-notif-cntr 125

Related Commands

show health-report

Notes

led <module> uid <on | off>

Configures the UID LED.

Syntax Description

module

Specifies the module whose UID LED to configure

on

Turns on UID LED

off

Turns off UID LED

Default

N/A

Configuration Mode

config

History

Example

switch (config) # led MGMT uid on

Related Commands

Notes

power enable <module name>
no power enable <module name> 

Powers on the module.
The no form of the command shuts down the module.

Syntax Description

module name

Enables power for selected module

Default

Power is enabled on all modules

Configuration Mode

config

History

Example

switch (config) # power enable L01

Related Commands

show power
show power consumers

Notes

system profile {eth-default | eth-ipv6-max | eth-ipv4-mc-max} [force] 

Optimizes switch system profile to preferred mode.

Syntax Description

eth-default

Balanced Ethernet profile

eth-ipv6-max

Optimized profile for IPv6 scale

eth-ipv4-mc-max

Optimized profile for IPv4 multicast scale

force

Forces operation, without the need for user confirmation

Default

eth-default

Configuration Mode

config

Example

switch (config) # system profile eth-default

Related Commands

show system profile

Notes

usb eject

Turns off the USB interface gracefully.

Default

N/A

Configuration Mode

config

History

Example

switch (config) # usb eject

Related Commands

Notes

Applicable only for systems with USB interface.

show asic-version 

Displays firmware ASIC version.

Syntax Description

N/A

Default

N/A

Configuration Mode

Any command mode

History

Example

Related Commands

Notes

show bios

Displays the BIOS version information.

Default

N/A

Configuration Mode

Any command mode

History

Example

switch (config) # show bios
BIOS version : 4.6.5
BIOS subversion : Official AMI Release
BIOS release date : 07/02/2021

Related Commands

Notes

show cpld

Displays status of all CPLDs in the system.

Syntax Description

N/A

Default

N/A

Configuration Mode

Any command mode

History

switch (config) # show cpld

----------------------------------------------------------------------------
Name           Type                 Version         Version Minor  PN    
----------------------------------------------------------------------------
Cpld1          CPLD_TOR             9               1              0x0078
Cpld2          CPLD_SWB_UNIFIED     3               3              0x0128
Cpld3          CPLD_LED             1               0              0x00d1

Related Commands

Notes

show fan 

Displays fans status.

Syntax Description

N/A

Default

N/A

Configuration Mode

Any command mode

History

Example

Related Commands

Notes

show health-report 

Displays health report.

Syntax Description

N/A

Default

N/A

Configuration Mode

Any command mode

History

Example

switch (config) # show health-report
========================
| ALERTS CONFIGURATION |
========================
Re-notification counter (sec):[3600]
Report max counter:           [50]
========================
|    HEALTH REPORT     |
========================
No Health issues file

Related Commands

health

Notes

show leds [<module>]

Displays the LED status of the switch system.

Syntax Description

module

Specifies the module whose LED status to display

Default

N/A

Configuration Mode

Any command mode

History

Example

Related Commands

Notes

show module

Displays modules status.

Syntax Description

N/A 

Default

N/A

Configuration Mode

Any command mode

History

Example

switch (config) # show module
======================
 Module    Status
======================
 MGMT      ready
 FAN1      ready
 FAN2      ready
 PS1       ready
 PS2       not-present

Related Commands

Notes

The Status column may have one of the following values: error, fatal, not-present, powered-off, powered-on, ready.

show protocols

Displays all protocols enabled in the system.

Syntax Description

N/A

Default

N/A

Configuration Mode

Any command mode

History

Example

Related Commands

Notes

show resources

Displays system resources.

Syntax Description

N/A 

Default

N/A

Configuration Mode

Any command mode

History

Example

switch (config) # show resources
Total      Used      Free
Physical  2027 MB    761 MB   1266 MB
Swap         0 MB      0 MB      0 MB

Number of CPUs:    1
CPU load averages: 0.11 / 0.23 / 0.23

CPU 1
  Utilization:                5%
  Peak Utilization Last Hour: 19% at 2012/02/15 13:26:19
  Avg. Utilization Last Hour: 7%

Related Commands

Notes

show system capabilities

Displays system capabilities.

Syntax Description

N/A 

Default

N/A

Configuration Mode

Any command mode

History 

Example

Related Commands

show system profile

Notes

show system hardware events <family-name> [clear-on-read]

Displays all active events.

Syntax Description

family-name

Displays all active events per event family:

• ethernet
• tunnel
• ip

clear-on-read

Clears all active events after displaying them

Default

N/A

Configuration Mode

Any command mode

History

3.6.6000

Example

switch (config) # show system hardware events clear-on-read

Ethernet:         smac is mc;
                  smac equal dmac;  
IP:               packet to router is not ip;  
Tunnel:

Related Commands

Notes

show system mac

Displays system MAC address.

Syntax Description

N/A

Default

N/A

Configuration Mode

Any command mode

History

3.1.0000

Example

switch (config) # show system mac
00:02:c9:5e:AF:18

Related Commands

N/A

Notes

show system profile 

Displays system profile.

Syntax Description

N/A

Default

N/A

Configuration Mode

Any command mode

History

Example

Related Commands

system profile

Notes

show system profile detailed

Displays detailed system profile.

Syntax Description

N/A 

Default

N/A

Configuration Mode

Any command mode

History

3.6.6000

Example

switch (config) # show system profile detailed 

Profile: eth-default

-----------------------------------------------
Parameter                  Guaranteed Max Value
-----------------------------------------------
FDB size                   102400
IPMC-L2 lists              10240
IPMC-L3 lists              10240
IPv4 MC/IGMP routes        10240
IPv4 neighbors             51200
IPv6 neighbors             8192
IPv4 routes                100000
IPv6 shorts                51200
IPv6 routes                21504
VRF                        64
RIF                        999

Related Commands

system profile

Notes

show system type

Displays system type.

Syntax Description

N/A

Default

N/A

Configuration Mode

Any command mode

History

Example

Related Commands

Notes

show temperature 

Displays system temperature sensors status.

Syntax Description

N/A 

Default

N/A

Configuration Mode

Any command mode

History

Example

Related Commands

Notes

show version

Displays version information for the currently running system image.

Syntax Description

N/A 

Default

N/A

Configuration Mode

Any command mode

History

Example

Related Commands

Notes

show version concise

Displays concise version information for the currently running system image.

Syntax Description

N/A

Default

N/A

Configuration Mode

Any command mode

History

Related Commands

Notes