Installing UFM Docker Container Mode

• MLNX_OFED must be installed on the server that will run UFM Docker

• For UFM to work, you must have an InfiniBand port configured with an IP address and in "up" state.

  Note

  For InfiniBand support, please refer to NVIDIA Inbox Drivers , or MLNX_OFED guides.

• Make sure to stop the following services before running UFM Docker container, as it utilizes the same default ports that they do: Pacemaker, httpd, OpenSM, and Carbon.

• If firewall is running on the host, please make sure to add an allow rule for UFM used ports (listed below):

  Note

  If the default ports used by UFM are changed in UFM configuration files, make sure to open the modified ports on the host firewall.

  • 80 (TCP) and 443 (TPC) are used by WS clients (Apache Web Server)

  • 8000 (UDP) is used by the UFM server to listen for REST API requests (redirected by Apache web server)

  • 6306 (UDP) is used for multicast request communication with the latest UFM Agents

  • 8005 (UDP) is used as a UFM monitoring listening port

  • 8888 (TCP) is used by DRBD to communicate between the UFM Primary and Standby servers

  • 2022 (TCP) is used for SSH

• Supported versions for upgrade are UFM v.6.10.0 and above.

• UFM files directory from previous container version mounted on the host.

To load the UFM docker image, pull the latest image from docker hub:

            

            
docker pull mellanox/ufm-enterprise:latest
        

            

            
docker run --rm mellanox/ufm-enterprise-installer:latest -h
        

If an Internet connection is not available, perform the following:

• Copy the UFM image to your machine.

• Load the image from the file using this command:

  Copy

  Copied!

              
  
              
  docker image load -i <image-path>
          

Installation Command Usage

            

            
docker run -it --name=ufm_installer --rm \
-v /var/run/docker.sock:/var/run/docker.sock \
-v /etc/systemd/system/:/etc/systemd_files/ \
-v /opt/ufm/files/:/installation/ufm_files/ \
-v [LICENSE_DIRECTORY]:/installation/ufm_licenses/ \
mellanox/ufm-enterprise:latest \
--install [OPTIONS]
        

Modify the variables in the installation command as follows:

• [UFM_LICENSES_DIR]: UFM license file or files location.

  Note

  Example: If your license file or files are located under /downloads/ufm_license_files/ then you must set this volume to be -v /downloads/ufm_license_files/:/installation/ufm_licenses/

• [OPTIONS]: UFM installation options. For more details see the table below.

Command Options

UFM Enterprise installer supports several deployment modes:

• Installing UFM on Docker Container - High Availability Mode

• Installing UFM on Docker Container - Standalone Mode