Firmware Compatible Products
These are the release notes for the NVIDIA® ConnectX®-7 adapters firmware. This firmware supports the following protocols:
InfiniBand - EDR, HDR1002, HDR2, NDR2002, NDR2
Ethernet - 1GbE, 10GbE, 25GbE, 40GbE, 50GbE1, 100GbE1, 200GbE 2, 400GbE2
PCI Express 5.0, supporting backwards compatibility for v4.0, v3.0, v2.0 and v1.1
1. Speed that supports both NRZ and PAM4 modes in Force mode and Auto-Negotiation mode.
2. Speed that supports PAM4 mode only.
When connecting an NVIDIA-to-NVIDIA adapter card in ETH PAM4 speeds, Auto-Neg should always be enabled.
Refer to the hardware documentation for the list of supported devices.
The following are the drivers’ software, tools, switch/HCA firmware versions tested that you can upgrade from or downgrade to when using this firmware version:
Supported Version | |
ConnectX-7 Firmware | 28.46.1006 / 28.45.1200 / 28.45.1020 |
DOCA-HOST | 3.1.0 / 3.0.0 Note: For the list of the supported Operating Systems, please refer to the driver's Release Notes. |
WinOF-2 | 25.7.50000 / 25.4.50020 / 25.1.51010 Note: For the list of the supported Operating Systems, please refer to the driver's Release Notes. |
MFT | 4.33.0-169 / 4.32.0-120 / 4.31.0-149 Note: For the list of the supported Operating Systems, please refer to the driver's Release Notes. |
FlexBoot | 3.8.100 |
UEFI | 14.39.13 |
MLNX-OS | 3.12.2002 onwards |
Cumulus | 5.13.0 |
NVIDIA Quantum-2 Firmware | 31.2014.2084 onwards |