NVIDIA UFM-SDN Appliance Command Reference Guide v4.16.0

NVIDIA Docs Hub Homepage NVIDIA Networking Networking Software Management Software NVIDIA UFM-SDN Appliance Command Reference Guide v4.16.0 Management Interface Monitoring

On This Page

ufm mgmt-interface monitor enable
ufm mgmt-interface monitor interval
ufm mgmt-interface
show ufm mgmt-interface

Management Interface Monitoring

ufm mgmt-interface monitor enable

	ufm mgmt-interface monitor enable no ufm mgmt-interface monitor enable Enables monitoring of the management interface. The no form of the command disables monitoring of the management interface.
Syntax Description	N/A
Default	http
Configuration Mode	config
History	4.1.5
Example	Copy Copied! `ufmapl [ mgmt-ha-active ] (config) # ufm mgmt-interface monitor enable`
Related Commands	ufm mgmt-interface monitor interval ufm mgmt-interface show ufm mgmt-interface
Notes

ufm mgmt-interface monitor interval

	ufm mgmt-interface monitor interval <time> Configures the management interface monitoring interval.
Syntax Description	time	The management interface monitoring interval. Range: 5-180 seconds.
Default	10 seconds
Configuration Mode	config
History	4.1.5
Example	Copy Copied! `ufmapl [ mgmt-ha-active ] (config) # ufm mgmt-interface monitor interval 15`
Related Commands	ufm mgmt-interface monitor enable ufm mgmt-interface show ufm mgmt-interface
Notes

ufm mgmt-interface

	ufm mgmt-interface <interface> Configures the management interface to be monitored.
Syntax Description	interface	Management interface to be monitored (e.g. eth0, eth1)
Default	eth0
Configuration Mode	config
History	4.1.5
Example	Copy Copied! `ufmapl [ mgmt-ha-active ] (config) # ufm mgmt-interface eth0`
Related Commands	ufm mgmt-interface monitor enable ufm mgmt-interface monitor interval show ufm mgmt-interface
Notes	The interface is set automatically when invoking the command "ufm ha configure".

show ufm mgmt-interface

	show ufm mgmt-interface Displays the management interface settings.
Syntax Description	N/A
Default	N/A
Configuration Mode	Any configuration mode
History	4.1.5
Example	Copy Copied! `ufmapl [ mgmt-ha-active ] (config) # show ufm mgmt-interface Management interface monitoring: Interface name: eth0 Enabled: Yes Monitoring interval: 10 seconds`
Related Commands	ufm mgmt-interface monitor enable ufm mgmt-interface monitor interval ufm mgmt-interface
Notes

© Copyright 2024, NVIDIA. Last updated on May 6, 2024.