NVIDIA UFM-SDN Appliance Command Reference Guide v4.16.0

NVIDIA Docs Hub Homepage NVIDIA Networking Networking Software Management Software NVIDIA UFM-SDN Appliance Command Reference Guide v4.16.0 Partition

On This Page

ib partition management defmember
show ib partition
ib partition management mtu-limit <2K|4K>

Partition

ib partition management defmember

	ib partition management defmember <type> no ib partition management defmember Sets the default membership for the management IB partition (default PKEY). The no form of the command resets the parameter to its default value.
Syntax Description	type	full – full membership limited – limited membership both – both full and limited membership
Default	Full membership
Configuration Mode	config
History	1.6
Example	Copy Copied! `UFM-APL [ mgmt-ha-active ] (config) # ib partition management defmember limited`
Related Commands	show ib partition
Notes	The defmember setting controls the ability of end nodes to communicate over the management partition It is not possible to modify the defmember in case OpenSM or UFM are running

show ib partition

	show ib partition Displays partition information.
Syntax Description	N/A
Default	N/A
Configuration Mode	Any configuration mode
History	1.6
Example	Copy Copied! `UFM-APL [ mgmt-ha-active ] (config) # show ib partition management: Default membership: full MTU limit: 2KB`
Related Commands	ib partition management defmember
Notes	N/A

ib partition management mtu-limit <2K|4K>

	ib partition management mtu-limit <2K\|4K> no ib partition management mtu-limit <2K\|4K> Sets the MTU limit for the default partition. The no form of the command reset the MTU limit for the default partition to default.
Syntax Description	mtu-limit	2K\|4K
Default
Configuration Mode	config
History	4.12.0
Example	Copy Copied! `UFM-APL [ mgmt-ha-active ] (config) # no ib partition management mtu-limit 4K`
Related Commands	N/A
Notes	N/A

© Copyright 2024, NVIDIA. Last updated on May 6, 2024.