ufm ha [ipv6] configure <peer-ip> <virtual-ip> [interface] no ufm ha Applies HA configuration. The no form of the command reverts the appliance to a standalone configuration. | ||
Syntax Description | peer-ip | Management IP address of peer machine |
virtual-ip | Virtual IP used for accessing the active (master) machine | |
interface | Sets the working interface. The interface can be eth0...eth3, if no interface is assigned, eth0 is assumed to be the chosen interface. | |
Default | N/A | |
Configuration Mode | config | |
History | 1.5 | |
1.6 | Added the “interface” parameter | |
Example |
| |
Related Commands | ||
Notes |
ufm ha [ipv6] configure dual-subnet <local-ip> <peer-ip> <interface> no ufm ha dual-subnet Applies HA configuration for dual-subnet. The no form of the command reverts the appliance to a standalone configuration. | ||
Syntax Description | local-ip | Management IP address of the local machine |
peer-ip | Management IP address of peer machine | |
interface | Sets the working interface. The interface can be eth0...eth3, if no interface is assigned, eth0 is assumed to be the chosen interface. | |
Default | N/A | |
Configuration Mode | config | |
History | 4.1.5 | |
Example |
| |
Related Commands | ||
Notes |
ufm ha [failover | takeover] Performs High Availability failover/takeover operations. | ||
Syntax Description | failover | Failover can be performed only on master (active) machine |
takeover | Takeover can be performed only on slave (standby) machine | |
Default | N/A | |
Configuration Mode | config | |
History | 1.5 | |
Example |
| |
Related Commands | ||
Notes |