NVIDIA UFM-SDN Appliance User Manual v4.11.1
NVIDIA UFM-SDN Appliance User Manual v4.11.1

Appendix – Enhanced Quality of Service

Enhanced QoS provides a higher resolution of QoS at the service level (SL). Users can configure rate limit values per SL for physical ports, virtual ports, and port groups, using enhanced_qos_policy_file configuration parameter.

Valid values of this parameter:

  • Full path to the policy file through which Enhanced QoS Manager is configured

  • “null” – to disable the Enhanced QoS Manager (default value)

Warning

To enable Enhanced QoS Manager, QoS must be enabled in SM configuration file.

The policy file is comprised of two sections:

  • BW_NAMES: Used to define bandwidth setting and name (currently, rate limit is the only setting). Bandwidth names are defined using the syntax:

    Copy
    Copied!
                

    <name> = <rate limit in 1Mbps units>

    Example:

    Copy
    Copied!
                

    My_bandwidth = 50

  • BW_RULES: Used to define the rules that map the bandwidth setting to a specific SL of a specific GUID. Bandwidth rules are defined using the syntax:

    Copy
    Copied!
                

    <guid>|<port group name> = <sl id>:<bandwidth name>, <sl id>:<bandwidth name>…

    Examples:

    Copy
    Copied!
                

    0x2c90000000025 = 5:My_bandwidth, 7:My_bandwidth Port_grp1 = 3:My_bandwidth, 9:My_bandwidth

Notes

  • Rate limit = 0 represents unlimited rate limit.

  • Any unspecified SL in a rule will be set to 0 (unlimited) rate limit automatically.

  • “default” is a well-known name which can be used to define a default rule used for any GUID with no defined rule (If no default rule is defined, any GUID without a specific rule will be configured with unlimited rate limit for all SLs).

  • Failure to complete policy file parsing leads to an undefined behavior. User must confirm no relevant error messages in SM log in order to ensure Enhanced QoS Manager is configured properly.

  • An empty file with only ‘BW_NAMES’ and ‘BW_RULES’ keywords configures the network with an unlimited rate limit.

Policy File Example

The below is an example of configuring all ports in the fabric with rate limit of 50Mbps on SL1, except for GUID 0x2c90000000025, which is configured with rate limit of 100Mbps on SL1. In this example, all SLs (other than SL1) are unlimited.

Copy
Copied!
            

----------------------------------------------------------------------- BW_NAMES bw1 = 50 bw2 = 100 BW_RULES default: 1:bw1 0x2c90000000025: 1:bw2 ------------------------------------------------------------------------


© Copyright 2023, NVIDIA. Last updated on Sep 5, 2023.