NVIDIA IGX Orin BMC User Guide

User Guide

• Introduction
  • Compatibility
  • BMC Source and Software Information
• BMC Quick Start
  • Hardware Setup
  • Power up the system
  • Set up your host to access the BMC
  • Access the BMC over SSH
  • (Optional) Configure Ubuntu as a DHCP Host
• MCU / Orin UART Access
  • Set General Purpose Input/Output (GPIO) in BMC to Switch Between MCU and Orin UART
• Update to the Latest IGX BMC Release
• Manage Your BMC From the Web UI
  • Connect to the BMC Web UI
  • Reboot your BMC
  • Open the UART console
  • Get the BMC firmware
  • Update your BMC firmware
  • Update your IGX BMC’s ERoT firmware
  • Update your MCU firmware
  • Update your QSPI firmware
  • Update your CX7 firmware
  • Perform power operations
  • View the temperature of your BMC
  • Install IGX OS using virtual media
  • Using IGX KVM
  • Factory reset your BMC
• User Management
  • Commands for User Management
  • Factory Reset
• BMC Management Network Interface
  • Access the network configuration from the BMC Web UI
  • Change the network configuration
    • Change static IP for new connection, while on DHCP network to access BMC
    • Add more static IP in same subnet mask, while on static network to access BMC
    • Switch to DHCP, while on static network to access BMC
  • Accessing Network Configuration using IPMITOOL
  • Enable DHCP mode using IPMITOOL
  • Available Network IPMI Commands
• Using IGX OS with BMC (Remote Media)
• Manage Your BMC From the Command Line and Redfish
  • Redfish API Support
    • Log in to your BMC
    • Get your BMC firmware version
    • Reboot your BMC
    • Mount the Base OS iso file
    • Reset your BMC and Orin settings
    • Related topics
  • Power Management
    • Commands for Power Management
  • Update Your BMC Firmware
    • Get the BMC firmware
    • Determine whether your BMC Module is ERoT or Non-ERoT
    • Update your IGX Developer Kit BMC (Non-ERoT) Firmware
    • Update your IGX Orin Board Kit BMC’s ERoT Firmware
    • Related topics
  • Update Your MCU Firmware
    • Update your MCU firmware by using Redfish
    • Update your MCU firmware manually
  • Update Your QSPI Boot Firmware
    • Determine Whether Your IGX Board is TS3 or QS2
    • Update Your QSPI Boot Firmware for TS3
    • Update Your QSPI Boot Firmware for QS2
  • Update Your CX7 (NBU) Firmware
    • Access the console and stop the fan control service
    • Update your CX7 firmware
    • Restart the fan control service
    • Related topics
  • Update Your ERoT Firmware
  • Related topics