Skip to main content
Ctrl+K
NVIDIA Mission Control Software Installation Guide - Home NVIDIA Mission Control Software Installation Guide - Home

NVIDIA Mission Control Software Installation Guide

NVIDIA Mission Control Software Installation Guide - Home NVIDIA Mission Control Software Installation Guide - Home

NVIDIA Mission Control Software Installation Guide

Table of Contents

Mission Control

  • Introduction
  • Mission Control Feature Support Matrix
  • NMC Prerequisites
  • Workload Manager Installation and Validation
  • Integration with Building Management Systems
  • Kubernetes Installation
  • Install and Configure NetQ
  • Observability Stack Configuration
  • Autonomous Recovery Engine
    • Autonomous Hardware Recovery (AHR) Installation
    • Autonomous Job Recovery (AJR) Installation
  • Power Reservation Steering
    • Installation
    • Validation of PRS Installation
  • NVIDIA Domain Power Service
  • NVIDIA Run:ai Installation
  • NMC Launchpad Installation
  • Security Hardening
  • Software Upgrade Guides
    • NVIDIA Mission Control Software Upgrade Guide (1.0 to 2.0) for B200 Systems
    • NVIDIA Mission Control Software Upgrade Guide (1.2 to 2.0) for GB200 NVL72 Systems
    • NVIDIA Mission Control Software Upgrade Guide (2.0 to 2.1) for B200 and GB200 NVL72 Systems
    • NVIDIA Mission Control Software Upgrade Guide (2.1 to 2.2) for B200 and GB200 NVL72 Systems
    • NVIDIA Mission Control Software Upgrade Guide (2.2 to 2.3) for B200, GB200 and GB300 NVL72 Systems
  • NMC Air-Gap Installation
    • Overview and prerequisites
    • Downloading NMC Artifacts with nmc-airgap and Helper Scripts
    • Kubernetes Installation
    • Importing Artifacts into the Air-Gapped Environment
    • Configuring Registry Mirroring
    • Installing NMC Components in Air-Gapped Mode
      • NetQ
      • Observability
      • AHR
      • AJR
      • DPS
      • Run:ai
      • NMC Launchpad
      • K8s security policy
    • Known limitations (NMC 2.3)
  • Appendix
  • Autonomous Recovery Engine

Autonomous Recovery Engine#

  • Autonomous Hardware Recovery (AHR) Installation
    • Deployment Diagram
    • Prerequisites
    • NVIDIA Mission Control autonomous hardware recovery Installation via BCM TUI Wizard
    • Initial Login to the NVIDIA autonomous hardware recovery UI
    • Backend Health and Agent Connectivity
    • NVIDIA Mission Control autonomous hardware recovery Uninstallation via BCM TUI Wizard
    • AHR Appendix
  • Autonomous Job Recovery (AJR) Installation
    • Introduction
    • Prerequisites
    • Before the Autonomous Job Recovery installation
    • Create certificates for AJR endpoints
    • Setup DNS resolution for AJR endpoints
    • Autonomous Job Recovery Installation
    • Autonomous Job Recovery post-installation steps
    • Autonomous Job Recovery Verification Steps
    • Autonomous Job Recovery uninstallation
    • Third-Party Open Source Software Licenses

previous

Observability Stack Configuration

next

NVIDIA Mission Control autonomous hardware recovery Installation Guide

NVIDIA NVIDIA

Copyright © 2024-2026, NVIDIA Corporation.

Last updated on Apr 22, 2026.