NVIDIA Mission Control Software Installation Guide#
Important
Most NVIDIA Mission Control deployment sites are air-gapped. Unless you have confirmed outbound internet access to NGC and all required software repositories, follow the Air-Gap Installation path. Complete the Common Setup section first regardless of which path you take.
Perform all steps in the order specified within each section.
Common Setup#
Complete these steps before starting either installation path.
Installation Path#
Choose one path based on your site’s network connectivity.
Installation Path
- Air-Gap Installation (Recommended)
- Overview and prerequisites
- Overview
- Prerequisites
- Pre-Installation Steps
- Downloading NVIDIA Mission Control Artifacts with nmc-airgap and Helper Scripts
- Manifest and bundle structure
- Kubernetes Installation
- Importing Artifacts into the Air-Gapped Environment
- Configuring Registry Mirroring
- Installing NMC Components in Air-Gapped Mode
- Known limitations (NMC 2.3)
- Connected Installation (Alternative)
Post-Installation#
Complete these steps after finishing either installation path, as applicable.
Post-Installation
- Integration with Building Management Systems
- Software Upgrade Guides
- NVIDIA Mission Control Software Upgrade Guide (1.0 to 2.0) for B200 Systems
- NVIDIA Mission Control Software Upgrade Guide (1.2 to 2.0) for GB200 NVL72 Systems
- NVIDIA Mission Control Software Upgrade Guide (2.0 to 2.1) for B200 and GB200 NVL72 Systems
- NVIDIA Mission Control Software Upgrade Guide (2.1 to 2.2) for B200 and GB200 NVL72 Systems
- NVIDIA Mission Control Software Upgrade Guide (2.2 to 2.3) for B200, GB200 and GB300 NVL72 Systems
- Appendix