Skip to main content
Ctrl+K
NVIDIA Mission Control Software Installation Guide - Home NVIDIA Mission Control Software Installation Guide - Home

NVIDIA Mission Control Software Installation Guide

NVIDIA Mission Control Software Installation Guide - Home NVIDIA Mission Control Software Installation Guide - Home

NVIDIA Mission Control Software Installation Guide

Table of Contents

Mission Control

  • Introduction
  • Mission Control Feature Support Matrix
  • NMC Prerequisites
  • Workload Manager Installation and Validation
  • Integration with Building Management Systems
  • Kubernetes Installation
  • Install and Configure NetQ
  • Observability Stack Configuration
  • Autonomous Recovery Engine
    • Autonomous Hardware Recovery (AHR) Installation
    • Autonomous Job Recovery (AJR) Installation
  • Power Reservation Steering
    • Installation
    • Validation of PRS Installation
  • NVIDIA Domain Power Service
  • NVIDIA Run:ai Installation
  • NMC Launchpad Installation
  • Security Hardening
  • Software Upgrade Guides
    • NVIDIA Mission Control Software Upgrade Guide (1.0 to 2.0) for B200 Systems
    • NVIDIA Mission Control Software Upgrade Guide (1.2 to 2.0) for GB200 NVL72 Systems
    • NVIDIA Mission Control Software Upgrade Guide (2.0 to 2.1) for B200 and GB200 NVL72 Systems
    • NVIDIA Mission Control Software Upgrade Guide (2.1 to 2.2) for B200 and GB200 NVL72 Systems
    • NVIDIA Mission Control Software Upgrade Guide (2.2 to 2.3) for B200, GB200 and GB300 NVL72 Systems
  • NMC Air-Gap Installation
    • Overview and prerequisites
    • Downloading NMC Artifacts with nmc-airgap and Helper Scripts
    • Kubernetes Installation
    • Importing Artifacts into the Air-Gapped Environment
    • Configuring Registry Mirroring
    • Installing NMC Components in Air-Gapped Mode
      • NetQ
      • Observability
      • AHR
      • AJR
      • DPS
      • Run:ai
      • NMC Launchpad
      • K8s security policy
    • Known limitations (NMC 2.3)
  • Appendix
  • Power Reservation Steering

Power Reservation Steering#

  • Installation
    • Key Concepts
    • Restrictions and Requirements
    • Option 1: Install using cm-prs-setup Wizard
    • Option 2: Install using BaseView (Web UI)
    • Check PRS Service Status on BCM Head Node
    • Slurm Configuration for PRS
    • Uninstall PRS
  • Validation of PRS Installation
    • Submit a Simple Test Job
    • Submit a Hero Job
    • Monitor Job Status

previous

Installation Guide for Autonomous Job Recovery

next

Installation
NVIDIA NVIDIA

Copyright © 2024-2026, NVIDIA Corporation.

Last updated on Apr 22, 2026.