Specifications
Physical | Size: 9.13 in. x 4.37 in. (232.0 mm x 111.15mm) | ||||
Connector: Dual Ethernet QSFP28 (copper and optical) | |||||
Protocol Support | Ethernet: 100GBASE-CR4, 100GBASE-KR4, 100GBASE-SR4, 56GBASE-R4, 550G Ethernet Consortium, 40GBASE-CR4, 40GBASE-SR4, 40GBASE-LR4, 40GBASE-ER4, 25GBASE-CR/CR-S, 25GBASE-SR, 25GBASE-LR, 25G Ethernet Consortium, 10GBASE-SR, 10GBASE-LR, 10GBASE-ER, 10GBASE-CX4, SGMII, 1000BASE-X | ||||
Data Rate | Ethernet | 1/10/25/40/50/100 Gb/s | |||
PCI Express Gen 3.0 / 4.0: SERDES @ 8.0GT/s / 16GT/s, 32 lanes (2.0 and 1.1 compatible) | |||||
Power | Voltage: 12V | ||||
Power | Airflow (LFM) | ||||
@40°C | @45°C | ||||
Typical Power | Passive Cables | 84W | 800LFM | 900LFM | |
Maximum Power | Passive Cables | 106W | 800LFM | 900LFM | |
1.5W Active Cables | 109W | 800LFM | 900LFM | ||
2.5W Active Cables | 111W | 800LFM | 900LFM | ||
3.5W Active Cables | 114W | 800LFM | 900LFM | ||
Maximum power available through QSFP28 port: 3.5W | |||||
Environmental | Temperature: | Operational | 0°C to 45°C | ||
Non-operational | -40°C to 70°C | ||||
Humidity: 90% relative humiditya | |||||
| Safety: CB / cTUVus / CE | ||||
EMC: CE / FCC / VCCI / ICES / RCM | |||||
RoHS: RoHS Compliant |
a. For both operational and non-operational states.
| Size: 9.13 in. x 4.37 in. (232.0 mm x 111.15mm) | ||||
Connector: Dual Ethernet QSFP28 (copper and optical) | |||||
Protocol Support | Ethernet: 100GBASE-CR4, 100GBASE-KR4, 100GBASE-SR4, 56GBASE-R4, 550G Ethernet Consortium, 40GBASE-CR4, 40GBASE-SR4, 40GBASE-LR4, 40GBASE-ER4, 25GBASE-CR/CR-S, 25GBASE-SR, 25GBASE-LR, 25G Ethernet Consortium, 10GBASE-SR, 10GBASE-LR, 10GBASE-ER, 10GBASE-CX4, SGMII, 1000BASE-X | ||||
Data Rate | Ethernet | 1/10/25/40/50/100 Gb/s | |||
PCI Express Gen 3.0 / 4.0: SERDES @ 8.0GT/s / 16GT/s, 32 lanes (2.0 and 1.1 compatible) | |||||
| Voltage: 12V | ||||
Power | Airflow (LFM) | ||||
@40°C | @45°C | ||||
Typical Power | Passive Cables | 77W | 700LFM | 800LFM | |
Maximum Power | Passive Cables | 98W | 700LFM | 800LFM | |
1.5W Active Cables | 101W | 700LFM | 800LFM | ||
2.5W Active Cables | 103W | 700LFM | 800LFM | ||
3.5W Active Cables | 106W | 700LFM | 800LFM | ||
Maximum power available through QSFP28 port: 3.5W | |||||
Environmental | Temperature: | Operational | 0°C to 45°C | ||
Non-operational | -40°C to 70°C | ||||
Humidity: 90% relative humiditya | |||||
Regulatory | Safety: CB / cTUVus / CE | ||||
EMC: CE / FCC / VCCI / ICES / RCM | |||||
RoHS: RoHS Compliant |
a. For both operational and non-operational states.
Networking LED Interfaces
There is a one bi-color I/O LED per port to indicate link status. See the below table for p hysical and logical link indications in Ethernet Mode.
LED Color and State | Description |
Off | A link has not been established |
Blinking Ambera | 6Hz blinking Amber indicates a problem with the physical link |
Solid Green | Indicates a valid link with no active traffic |
Blinking Green | Indicates a valid logical link with active traffic |
a. 1Hz Blinking Amber occurs due to running a beacon command for locating the BF1600 Controller Card
CPLD Revision LEDs Interface
There are four green I/O LEDs to indicate the CPLD revision. The LEDs are located on the BlueField BF1600 Controller Card. See the below table for Revision LEDs.
LED Number | CPLD Revision | |||
D6 | D7 | D8 | D9 | |
Off | Off | Off | Off | Rev 0 |
Off | Off | Off | Solid Green | Rev 1 |
Off | Off | Solid Green | Off | Rev 2 |
Off | Off | Solid Green | Solid Green | Rev 3 |
Off | Solid Green | Off | Off | Rev 4 |
Off | Solid Green | Off | Solid Green | Rev 5 |
Off | Solid Green | Solid Green | Off | Rev 6 |
Off | Solid Green | Solid Green | Solid Green | Rev 7 |
Solid Green | Off | Off | Off | Rev 8 |
CABLINE-CA II PLUS Connector LED Interfaces
There is one green I/O LED near each CABLINE-CA II PLUS connector indicating the proper connection of the CABLINE-CA II PLUS cable to the card’s connector. See the below two tables for the BF1600 Controller and Auxiliary cards LED specifications.
BF1600 Controller Card Cabline-CA II Plus Connector LED
LED Number | LED state | Description |
D10 | ON | The CABLINE-CA II PLUS cable is properly connected |
OFF | The CABLINE-CA II PLUS cable is not properly connected |
PCIe Auxiliary Connection Card Cabline-CA II Plus Connector LED
LED Number | LED state | Description |
D1 | ON | The CABLINE-CA II PLUS cable is properly connected |
OFF | The CABLINE-CA II PLUS cable is not properly connected |
Power-Good Signal LED Interface
There is one green I/O LED to indicate power-good signal. See the below table for LED specifications.
LED Number | LED state | Description |
D5 | ON | Indicates that all rails are valid and board power is up and running |
OFF | Power Failure |