NVIDIA Firmware Tools (MFT) Documentation v4.22.0
NVIDIA Firmware Tools (MFT) Documentation v4.22.0

Switch-IB Switch System

Upon first time flash burning, the GUIDs and VPD of the device are required to be set on the flash.

The sections below demonstrate two methods of burning a new Switch-IB device in order to set these initial settings. Subsequent firmware updates will not change these settings.

Warning

flint for OEM is required for burning Switch-IB for the first time.

For information regarding GUIDs, MACs and VPD, please refer to Accessing Remote InfiniBand Device by Direct Route MADs.

The examples below are for managed switches. For unmanaged switches, connect an MTUSB adapter (see MTUSB-1 USB to I2C Adapter) to the device and use the appropriate mst device (/dev/mst/mtusb…).

Method 1: Generating Firmware with Specific GUIDs and Burning it on the Flash

In order to burn a new Switch-IB device, follow the steps below:

  1. Generate the initial image with the correct GUIDs and VPD for the specific device using the mlxburn tool. The generated image occupies full flash size.

    Copy
    Copied!
                

    # mlxburn -fw FW/fw-SwitchIB.mlx -c FW/MSB7700-E_Ax.ini -wrimage fw-SwitchIB-MSB7700-E_Ax.bin -base_guid 0x0002c903002ef500 -vpd_r_file ./vpd_r_data.bin

  2. Disable the Write protection.

    Copy
    Copied!
                

    # flint -d /dev/mst/mt583_pciconf0 -ocr hw set Flash0.WriteProtected=Disabled # flint -d /dev/mst/mt583_pciconf0 -ocr hw set Flash1.WriteProtected=Disabled

  3. Burn the entire flash.

    Copy
    Copied!
                

    # flint -d /dev/mst/mt583_pciconf0 -i ./ fw-SwitchIB-MSB7700-E_Ax.bin - ocr -ignore_dev_data -allow_psid_change -nofs --yes burn

  4. Set Write protection.

    Copy
    Copied!
                

    # flint -d /dev/mst/mt583_pciconf0 -ocr hw set Flash0.WriteProtected=Top,2-SubSectors

  5. Enable flash quad SPI IO operations.

    Copy
    Copied!
                

    # flint -d /dev/mst/mt583_pciconf0 -ocr hw set QuadEn=1

Method 2: Generating Firmware Image with Blank GUIDs, Burning and Setting GUIDs on the Flash

In order to burn a new Switch-IB device, follow the steps below:

  1. Generate the initial image VPD for the specific device using the mlxburn tool. The generated image occupies full flash size.

    Copy
    Copied!
                

    # mlxburn -fw FW/fw-SwitchIB.mlx -c FW/MSB7700-E_Ax.ini -wrimage fw-SwitchIB-MSB7700-E_Ax.bin -vpd_r_file ./vpd_r_data.bin

  2. Disable the Write protection.

    Copy
    Copied!
                

    # flint -d /dev/mst/mt583_pciconf0 -ocr hw set Flash0.WritePro-tected=Disabled # flint -d /dev/mst/mt583_pciconf0 -ocr hw set Flash1.WritePro-tected=Disabled

  3. Burn the entire flash.

    Copy
    Copied!
                

    # flint -d /dev/mst/mt583_pciconf0 -i ./ fw-SwitchIB-MSB7700-E_Ax.bin - ocr -ignore_dev_data -allow_psid_change -nofs --yes burn

  4. Set device manufacture GUIDs.

    Copy
    Copied!
                

    # flint -d /dev/mst/mt583_pciconf0 -ocr -uid 0x0002c903002ef500 smg

  5. Set device GUIDs.

    Copy
    Copied!
                

    # flint -d /dev/mst/mt583_pciconf0 -ocr -uid 0x0002c903002ef500 sg

  6. Set Write protection.

    Copy
    Copied!
                

    # flint -d /dev/mst/mt583_pciconf0 -ocr hw set Flash0.WriteProtected=Top,2-SubSectors # flint -d /dev/mst/mt583_pciconf0 -ocr hw set Flash1.WriteProtected=Top,1-SubSectors

  7. Enable flash quad SPI IO operations.

    Copy
    Copied!
                

    # flint -d /dev/mst/mt583_pciconf0 -ocr hw set QuadEn=1

    1. To view flash settings:

      Copy
      Copied!
                  

      # flint -d /dev/mst/mt583_pciconf0 -ocr hw query

    2. To view assigned GUIDs:

      Copy
      Copied!
                  

      # flint -d /dev/mst/mt583_pciconf0 -ocr q

    3. To change a GUID after the initial burn:

      Copy
      Copied!
                  

      # flint -d /dev/mst/mt52000_pciconf0 -ocr -uid 0x0002c903002ef500 sg

© Copyright 2023, NVIDIA. Last updated on Jun 10, 2024.