Telemetry

NVIDIA Docs Hub NVIDIA Networking Networking Software Management Software NVIDIA UFM-SDN Appliance Command Reference Guide v4.15.0 Telemetry

On This Page

telemetry target enable
telemetry target import-filter-file
telemetry target ip port
telemetry target message type
telemetry streaming enable
show telemetry
show telemetry target
ufm low-frequency-telemetry enable
show ufm low-frequency-telemetry

telemetry target enable

	telemetry target <target-name> enable no telemetry target <target-name> enable Configures the target collector for the telemetry data. The no form of the command removes target collector configuration.
Syntax Description	N/A
Default	Disabled
Configuration Mode	config
History	4.5.0
Example	Copy Copied! `ufmapl [ mgmt-sa ] (config) # telemetry target example-target enable`
Related Commands	show telemetry show telemetry target
Notes

telemetry target import-filter-file

	telemetry target <target-name> import-filter-file {counters \| fields} <download-url> no telemetry target <target-name> import-filter-file Imports filter file for the target collector. The no form of the command disables filter file.
Syntax Description	counters	Specifies counters file
	fields	Specifies fields file
	download-url	Supported protocols: http, https, ftp, tftp, scp, sftp, and usb. For example: scp://username[:password]@hostname/path/filename, usb:/path/filename
Default	N/A
Configuration Mode	config
History	4.5.0
Example	Copy Copied! `ufmapl [ mgmt-sa ] (config) # telemetry target ufm-enterprise import-filter-file counters scp://user:password@host/tmp/aaa`
Related Commands	telemetry target enable show telemetry show telemetry target
Notes	If configuration exists for the specified target, then rerunning the command will overwrite the existing configuration.

telemetry target ip port

	telemetry target <target-name> ip <ipv4-address> port <port-id> [message-type {custom \| standard}] Configures IP address and port number to use for communication with telemetry target.
Syntax Description	ip	IPv4 address of the target
	port	Port number of the target
	message-type	Supported types: extended custom
Default	N/A
Configuration Mode	config
History	4.5.0
Example	Copy Copied! `ufmapl [ mgmt-sa ] (config) # telemetry target ufm-enterprise ip 10.10.10.10 port 443 message-type standard`
Related Commands	telemetry target enable show telemetry show telemetry target
Notes	If configuration exists for the specified target, then rerunning the command will overwrite the existing configuration.

telemetry target message type

	telemetry target <target-name> message type {custom \| standard} Configures telemetry target message type.
Syntax Description	N/A
Default	standard
Configuration Mode	config
History	4.5.0
Example	Copy Copied! `ufmapl [ mgmt-sa ] (config) # telemetry target ufm-enterprise message-type extended`
Related Commands	show telemetry show telemetry target
Notes

telemetry streaming enable

	telemetry streaming enable no telemetry streaming enable Enables telemetry streaming. The no form of the command disables telemetry streaming
Syntax Description	N/A
Default	Disabled
Configuration Mode	config
History	4.5.0
Example	Copy Copied! `ufmapl [ mgmt-sa ] (config) # telemetry streaming enable`
Related Commands	show telemetry
Notes

show telemetry

	show telemetry Displays telemetry target settings.
Syntax Description	N/A
Default	N/A
Configuration Mode	Any configuration mode
History	4.5.0
Example	Copy Copied! `ufmapl [ mgmt-sa ] (config) # show telemetry Enabled: Yes Telemetry Targets: Name: ufm-enterprise Enabled: Yes Host: 127.0.0.1 Port: 25225 Message Type: Standard Counters filter file: Yes Fields filter file: Yes`
Related Commands	telemetry target enable
Notes

show telemetry target

	show telemetry target Displays telemetry settings for specific target.
Syntax Description	N/A
Default	N/A
Configuration Mode	Any configuration mode
History	4.5.0
Example	Copy Copied! `ufmapl [ mgmt-sa ] (config) # show telemetry target ufm-enterprise Enabled: Yes Name: ufm-enterprise Enabled: Yes Host: 127.0.0.1 Port: 25225 Message Type: Standard Counters filter file: Yes Fields filter file: Yes`
Related Commands	telemetry target enable
Notes

ufm low-frequency-telemetry enable

	ufm low-frequency-telemetry enable no ufm low-frequency-telemetry enable Enables UFM low frequency telemetry. The no form of the command disables UFM low frequency telemetry.
Syntax Description	N/A
Default	N/A
Configuration Mode	Any configuration mode
History	4.10.0
Example	Copy Copied! `ufmapl [ mgmt-ha-active ] (config) # ufm low-frequency-telemetry enable`
Related Commands	show ufm low-frequency-telemetry
Notes

show ufm low-frequency-telemetry

	show ufm low-frequency-telemetry Displays UFM low frequency telemetry settings.
Syntax Description	N/A
Default	N/A
Configuration Mode	Any configuration mode
History	4.10.0
Example	Copy Copied! `ufmapl [ mgmt-ha-active ] (config) # show ufm low-frequency-telemetry Low Frequency Telemetry: No`
Related Commands	ufm low-frequency-telemetry enable
Notes

© Copyright 2023, NVIDIA. Last updated on Feb 8, 2024.