Unhealthy Ports

NVIDIA Docs Hub NVIDIA Networking Networking Software Management Software NVIDIA UFM-SDN Appliance Command Reference Guide v4.15.0 Unhealthy Ports

On This Page

ufm unhealthy-ports isolate-high-ber isolation-mode
ufm unhealthy-ports isolate-high-ber enable
ufm unhealthy-ports switch-ports-threshold
ufm high-ber-ports enable-warnings
show ufm unhealthy-ports
show ufm high-ber-ports
ufm network-fast-recovery enable
show ufm network-fast-recovery

ufm unhealthy-ports isolate-high-ber isolation-mode

	ufm unhealthy-ports isolate-high-ber isolation-mode <mode> Configure high BER ports isolation mode.
Syntax Description	mode	all – isolates switch-to-switch and switch-to-host unhealthy high-BER ports switch-switch – isolates switch-to-switch unhealthy high-BER ports switch-host – isolates switch-to-host unhealthy high-BER ports
Default	switch-switch
Configuration Mode	config
History	4.7.0
Example	Copy Copied! `ufmapl [ mgmt-ha-active ] (config) # ufm high-ber-ports isolate-high-ber isolation-mode switch-switch`
Related Commands	show ufm unhealthy-ports ufm unhealthy-ports isolate-high-ber enable
Notes

ufm unhealthy-ports isolate-high-ber enable

	ufm unhealthy-ports isolate-high-ber enable no ufm unhealthy-ports isolate-high-ber enable Enable automatically marking high-BER ports as unhealthy. The no form of the command stops automatically marking high-BER ports as unhealthy.
Syntax Description	N/A
Default	Disabled
Configuration Mode	config
History	4.6.0
Example	Copy Copied! `ufmapl [ mgmt-ha-active ] (config) # ufm unhealthy-ports isolate-high-ber enable`
Related Commands	show ufm unhealthy-ports
Notes	Please stop UFM before performing attempting to change the event query interval value.

ufm unhealthy-ports switch-ports-threshold

	ufm unhealthy-ports switch-ports-threshold <threshold> Configure the unhealthy switch ports event threshold
Syntax Description	threshold	0-99 percent
Default	20%
Configuration Mode	config
History	4.12.0
Example	Copy Copied! `ufmapl [ mgmt-ha-active ] (config) # ufm unhealthy-ports switch-ports-threshold 30`
Related Commands	show ufm unhealthy-ports
Notes

ufm high-ber-ports enable-warnings

	ufm high-ber-ports enable-warnings no ufm high-ber-ports enable-warnings Enables high BER ports warnings. The no form of the command disables the UFM high BER ports warnings.
Syntax Description	N/A
Default	Disabled
Configuration Mode	config
History	4.7.0
Example	Copy Copied! `ufmapl [ mgmt-ha-active ] (config) # ufm high-ber-ports enable-warnings`
Related Commands	show ufm high-ber-ports
Notes

show ufm unhealthy-ports

	show ufm unhealthy-ports Displays UFM unhealthy ports settings.
Syntax Description	N/A
Default	N/A
Configuration Mode	Any configuration mode
History	4.6.0
History	4.7.0	Updated output
Example	Copy Copied! `ufmapl [ mgmt-ha-active ] (config) # show ufm unhealthy-ports Enabled: No Isolation Mode: switch-switch Switch Ports Event Threshold: 20 percent`
Related Commands	ufm unhealthy-ports isolate-high-ber enable ufm unhealthy-ports isolate-high-ber isolation-mode
Notes

show ufm high-ber-ports

	show ufm high-ber-ports Displays high BER ports configuration.
Syntax Description	N/A
Default	N/A
Configuration Mode	Any configuration mode
History	4.7.0
Example	Copy Copied! `ufmapl [ mgmt-ha-active ] (config) # show ufm high-ber-ports Enable Warnings: No`
Related Commands	ufm high-ber-ports enable-warnings
Notes

ufm network-fast-recovery enable

	ufm network-fast-recovery enable no ufm network-fast-recovery enable Enables UFM network fast recovery. The no form of the command disables UFM network fast recovery.
Syntax Description	N/A
Default	N/A
Configuration Mode	Any configuration mode
History	4.12.0
Example	Copy Copied! `ufmapl [ mgmt-ha-active ] (config) # ufm network-fast-recovery enable`
Related Commands	show ufm network-fast-recovery
Notes

show ufm network-fast-recovery

	show ufm network-fast-recovery Displays UFM network fast recovery settings.
Syntax Description	N/A
Default	N/A
Configuration Mode	Any configuration mode
History	4.12.0
Example	Copy Copied! `ufm-apl [ mgmt-ha-active ] (config) # show ufm network-fast-recovery Network Fast Recovery: No`
Related Commands	ufm network-fast-recovery enable
Notes

© Copyright 2023, NVIDIA. Last updated on Feb 8, 2024.