Network Bonding

bond

	bond <bonded-if> [mode <string>] [link-mon-time <milliseconds>] [up-delay-time <milliseconds>] [down-delay-time <milliseconds>] no bond <bonded-if> Creates the named bonded interface. The no form of the command deletes the named bonded interface.
Syntax Description	mode	Specifies the type of mode the bonded interface is: balance-rr backup balance-xor balance-xor-layer3+4 broadcast link-agg link-agg-layer3+4 balance-tlb balance-alb
	link-mon-time	Specifies the link monitoring frequency (in msecs)
	up-delay-time	Specifies the time (in msecs) to wait before enabling a slave after a link recovery has been detected
	down-delay-time	Specifies the time (in msecs), to wait before disabling a slave after a link failure has been detected for the specified bonded interface
Default	N/A
Configuration Mode	config
History	1.5
Example	Copy Copied! `ufmapl [ mgmt-sa ] (config) # bond bond0 mode backup ufmapl [ mgmt-sa ] (config) # bond bond0 link-mon-time 100`
Related Commands	interface show bonds
Notes

	interface <ifname> bond <bond-if> no interface <ifname> bond <bond-if> Adds the named interface from the specified bonded interface. The no form of the command removes the named interface from the specified bonded interface.
Syntax Description	bond	The bonded interface
Default	N/A
Configuration Mode	config
History	1.5
Example	Copy Copied! `ufmapl [ mgmt-sa ] (config) # interface ib0 bond bond0`
Related Commands	bond show bonds
Notes

	show bonds [bonded-if] Displays bonding configuration and status.
Syntax Description	N/A
Default	N/A
Configuration Mode	Any configuration mode
History	1.5
Example	Copy Copied! `ufmapl [ mgmt-sa ] (config) # show bonds Bonded Interface bond0: Enabled: yes Mode: backup Link Monitor Time: 100 Interfaces: ib0 ib1`
Related Commands	bond interface
Notes