NVIDIA UFM-SDN Appliance Command Reference Guide v4.15.0
NVIDIA UFM-SDN Appliance Command Reference Guide v4.15.0

Routing

{ip | ipv6} default-gateway {<ip-address> | <ifname>}

no {ip | ipv6} default-gateway

Sets a static default gateway.

The no form of the command deletes the default gateway.

Syntax Description

ip-address

The default gateway IP address

ifname

Name of the interface interface name (e.g. eth0, eth1).

Default

N/A

Configuration Mode

config

History

1.5

Example

Copy
Copied!
            

ufmapl [ mgmt-sa ] (config) # ip default-gateway 172.30.0.1

Related Commands

show {ip | ipv6} default-gateway

show {ip | ipv6} route

Notes

  • The configured default gateway will not be used if DHCP is enabled

  • In order to configure ipv4 default-gateway use "ip route" command

show {ip | ipv6} default-gateway [static]

Displays the default gateway.

Syntax Description

static

Displays the static configuration of the default

gateway

Default

N/A

Configuration Mode

Any configuration mode

History

1.5

Example

Copy
Copied!
            

ufmapl [ mgmt-sa ] (config) # show ip default-gateway Active default gateways: 172.30.0.1 (interface: eth0)

Related Commands

{ip | ipv6} default-gateway

Notes

{ip | ipv6} route {<network-prefix> <netmask> | <network-prefix>/<masklen>} <next-hop>

no ip route {<network-prefix> <netmask> | <network-prefix>/<masklen>} <next-hop>

Sets a static route for a given IP.

The no form of the command deletes the static route.

Syntax Description

network-prefix

IPv4 or IPv6 network prefix

netmask

IPv4 netmask formats are:

  • /24

  • 255.255.255.0

IPv6 netmask format is:

  • /48 (as a part of the network prefix)

nexthop-address

IPv4 or IPv6 address of the next hop router for this route

ifname

Interface name (e.g. eth0, eth1)

Default

N/A

Configuration Mode

config

History

4.1.0

Example

Copy
Copied!
            

ufmapl [ mgmt-sa ] (config) # ip route 20.20.20.0 255.255.255.0 eth0

Related Commands

show ip route

Notes

show {ip | ipv6} route [static]

Displays the routing table in the system.

Syntax Description

static

Filters the table with the static route entries

Default

N/A

Configuration Mode

Any configuration mode

History

4.1.0

Example

Copy
Copied!
            

ufmapl [ mgmt-sa ] (config) # show ip route Destination Mask Gateway Interface Source default 0.0.0.0 172.30.0.1 eth0 DHCP 10.10.10.10 255.255.255.255 0.0.0.0 eth0 static 20.10.10.10 255.255.255.255 172.30.0.1 eth0 static 20.20.20.0 255.255.255.0 0.0.0.0 eth0 static 172.30.0.0 255.255.0.0 0.0.0.0 eth0 interface

Related Commands

{ip | ipv6} route

Notes

© Copyright 2023, NVIDIA. Last updated on Feb 8, 2024.