For a list of old fixes, please see Bug Fixes History.
Internal Ref. | Issue |
3298557 | Description: Fixed the status of ZTT feature reported by the "mlx5cmd -features" command after driver restart when the feature is supported by the firmware and enabled by the registry key EnableZtt. |
Keywords: ZTT, mlx5cmd | |
Detected in version: 3.10.50000 | |
Fixed in version: 3.20.50010 | |
3318605 | Description: Auto-negotiation is always enabled even when the user selects a specific speed to support a case where multiple options of the same speed are available. |
Keywords: AN, auto-negotiation, link speed | |
Detected in version: 3.10.50000 | |
Fixed in version: 3.20.50010 | |
3233876 | Description: Disabled the mlx5cmd option to mention 'Zero Touch Roce' in a VM as this feature is supported only on the Host. |
Keywords: ZeroTouchRoCE ,ZTR, Virtual Machine | |
Detected in version: 3.10.50000 | |
Fixed in version: 3.20.50010 | |
3215011 | Description: If SR-IOV or the number of VFs is set to 0, the "mlx5cmd -feature" shows VMQOS' status as enabled and rev2 as disabled although VMQOS is actually disabled. |
Keywords: VMQOS mlx5cmd | |
Detected in version: 3.10.50000 | |
Fixed in version: 3.20.50010 | |
2864037 | Description: When using mlx5cmd "-vportmapping" on dual port devices, occasionally the header is not presented. |
Keywords: VportMapping, mlx5cmd | |
Detected in version: 2.80.50000 | |
Fixed in version: 3.20.50010 | |
3259399 / 3258418 | Description: Fixed an issue where mlxndperf tool failed with error 0x8000001a when setting the queue depth to 1 or 2 and on "send" mode. |
Keywords: mlxndperf | |
Detected in version: 3.10.50000 | |
Fixed in version: 3.20.50010 | |
3159828 | Description: Fixed an issue that caused the driver to report it supports 257 scheduled queues when it actually supports only 256. The issue occurred when:
|
Keywords: VMQOS Rev 1, Max SQ | |
Detected in version: 3.10.50000 | |
Fixed in version: 3.20.50010 |