Rev 4.0.2 – May 08, 2023
Added:
- Page "SoC Management Interface"
- Page "Legal Notices and 3rd Party Licenses"
- Section "Unable to load BL2, BL2R, or PSC image"
Updated:
Section "Default Ports and OVS Configuration" with new step 2
- Section "BlueField Linux Drivers" with
gpio-mlxbf3,mlxbf-ptm,pwr-mlxbf, andpinctrl-mlxbf - Page "Updating DPU Software Packages Using Standard Linux Tools"
- Page "UEFI Secure Boot"
- Section "IPsec Hardware Offload: Full Offload" with Canonical note
- Section "How to upgrade ConnectX firmware from Arm side"
- Section "VirtIO-net PF Device Configuration" by removing
ECPF_ESWITCH_MANAGERandECPF_PAGE_SUPPLIERfrom step 4 - Section "Virtio-net SR-IOV VF Device Configuration" by removing
ECPF_ESWITCH_MANAGERandECPF_PAGE_SUPPLIERfrom step 7.b - Section "vDPA over VirtIO Full Emulation"
Rev 3.9.3 – November 02, 2022
Added:
- Section "DHCP Client Configuration"
- Section "Updating DPU Software Packages Using Standard Linux Tools"
- Section "Creating Transitional Hotplug VirtIO-net PF Device"
- Section "Transitional VirtIO-net VF Device Support"
Updated:
- Section "Upgrading Boot Software" by specifying that the "Reset EFI Variables" action also wipes the BOOT option variables and secure boot keys
- Section "BlueField Linux Drivers"
- Section "Configuring Uplink MTU"
- Section "Disabling Host Networking PFs" by adding instructions for reactivating host networking for single-port DPUs
- Section "Configuring RegEx Acceleration on BlueField-2"
- Section "Virtio-net SR-IOV VF Device Configuration"
PXE_DHCP_CLASS_IDin section "bf.cfg Parameters"
Removed:
- Step 7 in section "Configuring Host Server Side"
- Separated Mode from "Modes of Operation"
Rev 3.9.2 – August 02, 2022
Added:
- Section "Updating NVConfig Params"
- Page "System Configuration and Services"
- Section "Enrolling New NVIDIA Certificates"
- Section "bf.cfg Parameters"
- Support for OpenSSL version 3.0.2 in section "PKA Use Cases"
- Section "How to change the default network configuration during BFB installation"
Updated:
- Section "Firmware Upgrade"
- Section "Customizations During BFB Installation"
- Section "UEFI System Configuration"
- Page "Host-side Interface Configuration"
- Section "Enrolling Certificates Using Capsule"
- Section "NIC Mode" with supported MLNX_OFED versions
- Section "PKA Use Cases" with support for OpenSSL version 3.0.2
Rev 3.9 – May 03, 2022
Added:
- Section "GRUB Password Protection"
- New note under step 2 in section "Default Ports and OVS Configuration"
- Section "BlueField Linux Drivers"
- Canonical db certificate to section "Existing DPU Certificates"
- New note under section "Enrolling Certificates Using Capsule"
- New power cycle note under section "Enabling Host Restriction"
- New power cycle note under section "Disabling Host Restriction"
- Section "NIC Mode"
- Section "LAG on Multi-host"
- New power cycle note under section "Disabling Host Networking PFs"
- Section "PKA Prerequisites"
- Section "OVS IPsec"
- Section "Rate Limiting VF Group"
- Note to section "User Frontend"
- Section "Controller Live Update"
Updated:
- Code block in section "Customizations During BFB Installation"
- Section "Building Your Own BFB Installation Image"
- Section "Configuring VXLAN Tunnel"
- Step 2 in section "Prerequisites"
- Section "Enabling IPsec Full Offload"
- Code block under step 1 in section "LAG Configuration"
Rev 3.8.5 – January 19, 2022
Added:
- Section "Another backend already attached"
Updated:
- Section "Ensure RShim Running on Host"
