- Introduction
- System Requirements
- Installing Tools on Aerial Devkit
- Prerequisites
- Configure BIOS Settings
- Install Ubuntu 22.04 Server
- Verify BIOS settings
- Configure the Network Interfaces
- Disable Auto Upgrade
- Install the Low-Latency Kernel
- Configure Linux Kernel Command-line
- Apply the Changes and Reboot to Load the Kernel
- Disabling nouveau
- Install Dependency Packages
- Install Mellanox OFED and Firmware Tools on the Host
- Install CUDA driver
- Install Docker CE
- Install the Nvidia Container Toolkit
- Install ptp4l and phc2sys
- Setup boot configuration service
- Install Matlab (Optional)
- Installing Tools on Dell R750
- Dell PowerEdge R750 Server Configuration
- Converged Accelerator Installation
- Cable Connection
- Configure BIOS Settings
- Install Ubuntu 22.04 Server
- Disable Auto Upgrade
- Install the Low-Latency Kernel
- Configure Linux Kernel Command-line
- Apply the Changes and Reboot to Load the Kernel
- Disabling nouveau
- Install Dependency Packages
- Install Mellanox OFED and Firmware Tools on the Host
- Install CUDA driver
- Install Docker CE
- Install the Nvidia Container Toolkit
- Update AX800 NIC Firmware and BFB Image
- Update A100X NIC Firmware and BFB Image
- Set Persistent NIC Interface Name
- Install ptp4l and phc2sys
- Setup boot configuration service
- Installing and Upgrading cuBB SDK
- Update Mellanox OFED and Firmware Tools on the Host
- Update CX6-DX NIC Firmware
- Update A100X NIC Firmware and BFB Image
- Disable Flow Rules for Both Ports of CX6-DX/A100X
- Update the NVIDIA CUDA Driver
- Removing the Old cuBB SDK Container
- Installing the New cuBB SDK Container
- Upgrading MOFED in cuBB Container
- Aerial System Scripts
- Troubleshooting
cuBB Installation Guide
Aerial SDK 23-3
Previous
cuBB on NVIDIA Cloud Native Stack
Next
Introduction