HUMAN_PAR PIPELINE
Given one or more pairs of fastq files, you can run the human_par pipeline workflow to generate output including BAM, recal, and variants called with proper pseudoautosomal region ploidy values.
The human_par pipeline shown below resembles the GATK4 best practices pipeline. The inputs are BWA-indexed reference files, pair-ended fastq files, knownSites for BQSR calculation, and specifications to determine which sex to run variant calling. Male samples run Haplotype Caller first on non-X/Y regions and the pseudoautosomal region with ploidy 1 and second on X/Y regions without the pseudoautosomal region with ploidy 2. Female samples run Haplotype Caller on all regions with ploidy 2. The outputs of this pipeline are:
Aligned, co-ordinate sorted, duplicated marked bam
BQSR report
Variants in vcf/g.vcf/g.vcf.gz format
Three options are used to determine the sex of the input sample. The --sample-sex
option can be used to manually set the sex as male or female, overriding the sex detected from the number of X and Y reads. Additionally, two X/Y ratio range options can be used to automatically detect the sex of the sample based on the number of X and Y reads. Both --range-male
and --range-female
options provide a range for the possible value of the X/Y ratio. If the X/Y ratio falls in any of the given ranges, that sex will be used for Haplotype Caller; however, if the X/Y ratio is not in any range, the pipeline relies on the --sample-sex
option to continue. At least one of these three options must be provided.
Run a human_par pipeline:
$ pbrun human_par --ref Ref/Homo_sapiens_assembly38.fasta \
--in-fq Data/sample_1.fq.gz Data/sample_2.fq.gz \
--knownSites Ref/Homo_sapiens_assembly38.known_indels.vcf.gz \
--range-male 1-10 \
--range-female 150-250 \
--sample-sex male \
--out-bam output.bam \
--out-variants output.vcf \
--out-recal-file report.txt
The command below is the bwa-0.7.12 and GATK4 counterpart of the Parabricks command above. The output from these commands will generate the exact same results as the output from the above command. Please look at Output Comparison page on how you can compare the results.
# Run bwa-mem and pipe output to create sorted bam
$ bwa mem -t 32 -K 10000000 -R '@RG\tID:sample_rg1\tLB:lib1\tPL:bar\tSM:sample\tPU:sample_rg1' \
Ref/Homo_sapiens_assembly38.fasta S1_1.fastq.gz S1_2.fastq.gz | gatk \
SortSam --java-options -Xmx30g --MAX_RECORDS_IN_RAM=5000000 -I=/dev/stdin \
-O=cpu.bam --SORT_ORDER=coordinate --TMP_DIR=/raid/myrun
# Mark Duplicates
$ gatk MarkDuplicates --java-options -Xmx30g -I=cpu.bam -O=mark_dups_cpu.bam \
-M=metrics.txt --TMP_DIR=/raid/myrun
# Generate BQSR Report
$ gatk BaseRecalibrator --java-options -Xmx30g --input mark_dups_cpu.bam --output \
recal_cpu.txt --known-sites Ref/Homo_sapiens_assembly38.known_indels.vcf.gz \
--reference Ref/Homo_sapiens_assembly38.fasta
# Run ApplyBQSR Step
$ gatk ApplyBQSR --java-options -Xmx30g -R Ref/Homo_sapiens_assembly38.fasta \
-I=mark_dups_cpu.bam --bqsr-recal-file=recal_file.txt -O=cpu_nodups_BQSR.bam
#Run Haplotype Caller on the non-X/Y regions and the pseudoautosomal region
$ gatk HaplotypeCaller --java-options -Xmx30g --input cpu_nodups_BQSR.bam --output \
result_cpu_non_xy.vcf --reference Ref/Homo_sapiens_assembly38.fasta \
-L non_xy_regions_with_par.list --native-pair-hmm-threads 16
#Run Haplotype Caller on the X/Y regions without the pseudoautosomal region
$ gatk HaplotypeCaller --java-options -Xmx30g --input cpu_nodups_BQSR.bam --output \
result_cpu_xy.vcf --reference Ref/Homo_sapiens_assembly38.fasta \
-L xy_regions_without_par.list --native-pair-hmm-threads 16 \
(--ploidy 1 for male samples)
#Merge the variants from both Haplotype Caller runs
$ gatk MergeVcfs -I result_cpu_non_xy.vcf -I result_cpu_xy.vcf -O result_cpu.vcf
- --ref
- --in-fq
- --in-se-fq
- --out-bam
- --out-variants
- --sample-sex
- --range-male
- --range-female
- --out-recal-file
- --knownSites
- --no-markdups
- --out-duplicate-metrics
- --markdups-assume-sortorder-queryname
- --optical-duplicate-pixel-distance
- --read-group-sm
- --read-group-lb
- --read-group-pl
- --read-group-id-prefix
- --static-quantized-quals
- --batch
- --disable-read-filter
- --interval-file
- --interval
- --interval-padding
- --gvcf
- --bwa-options
- --haplotypecaller-options
- --max-alternate-alleles
- --annotation-group
- --gvcf-gq-bands
- --dont-use-soft-clipped-bases
- --markdups-picard-version-2182
- --rna
- --standalone-bqsr
- --no-warnings
(required) The reference genome in fasta format. We assume that the indexing required to run bwa has been completed by the user.
(required) Pair ended fastq files. These can be in .fq.gz or .fastq.gz format. You can provide multiple pairs as inputs like so: ... --in-fq $fq1 $fq2 --in-fq $fq3 $fq4 ...
(required) Single ended fastq files. These can be in .fastq or .fastq.gz format. You can provide read group information as an optional third argument.
Example 1:
--in-se-fq sampleX.fastq.gz
Example 2:
--in-se-fq sampleX.fastq.gz "@RG\tID:foo\tLB:lib1\tPL:bar\tSM:sample\tPU:unit1"
This option can be repeated multiple times as well.
Example 1:
--in-se-fq sampleX_1.fastq.gz --in-se-fq sampleX_2.fastq.gz
Example 2:
--in-se-fq sampleX_1.fastq.gz "@RG\tID:foo\tLB:lib1\tPL:bar\tSM:sample\tPU:unit1" \
--in-se-fq sampleX_2.fastq.gz "@RG\tID:foo2\tLB:lib1\tPL:bar\tSM:sample\tPU:unit2"
Either all sets of inputs have read group or none should have it and will be automatically added by the pipeline. For the same sample, Read Groups should have the same sample name (SM) and different ID and PU.
(required) Path to the file that will contain BAM/CRAM output.
(required) Name of VCF/GVCF/GVCF.GZ file after Variant Calling. Absolute or relative path can be given.
Sex of the sample input. This option will override the sex determined from --range-male
or --range-female
.
Required if --range-male
and --range-female
are not given.
Must be either male or female.
Inclusive male range for the X/Y read ratio. The sex is declared male if the actual ratio falls in the specified range. Required if --sample-sex
and --range-female
are not given. Syntax is - .
Inclusive female range for the X/Y read ratio. The sex is declared female if the actual ratio falls in the specified range. Required if --sample-sex
and --range-male
are not given. Syntax is - .
Path of report file (.txt format) after Base Quality Score Recalibration.
Full path to a known indels file. Must be in VCF format. This option can be used multiple times.
Path of duplicate metrics file after Marking Duplicates.
Defaults to False.
Do not mark duplicates, generate bam after co-ordinate sorting.
Assume the reads are sorted by queryname for Marking Duplicates. This will mark secondary, supplementary and unmapped reads as duplicates as well. This flag will not impact variant calling while increasing processing times.
The maximum offset between two duplicate clusters in order to consider them optical duplicates. Ignored if –out-duplicate-metrics is not passed.
SM tag for read groups in this run.
LB tag for read groups in this run.
PL tag for read groups in this run.
Prefix for ID and PU tag for read groups in this run. This prefix will be used for all pair of fastq files in this run. The ID and PU tag will consist of this prefix and an identifier which will be unique for a pair of fastq files.
Use static quantized quality scores to a given number of levels. Repeat this option multiple times for multiple bins.
Given an input list of BAMs, run the variant calling of each BAM using one GPU, and process BAMs in parallel based on how many GPUs the system has.
Disable the read filters for bam entries. Currently supported read filters that can be disabled are: MappingQualityAvailableReadFilter, MappingQualityReadFilter, and NotSecondaryAlignmentReadFilter.
Path to an interval file for BQSR step with possible formats: Picard-style (.interval_list or .picard), GATK-style (.list or .intervals), or BED file (.bed). This option can be used multiple times (default: None)
(-L) Interval strings within which to call variants from the input reads. All intervals will have a padding of 100 to get read records and overlapping intervals will be combined. Interval files should be passed using the –interval-file option. This option can be used multiple times. e.g. -L chr1 -L chr2:10000 -L chr3:20000+ -L chr4:10000-20000
(default: None)
(-ip) Padding size (in base pairs) to add to each interval you are including (default: None)
Defaults to False.
Generate variant calls in gVCF format. Final output will have .g.vcf extension.
Pass supported bwa mem options as one string. Current original bwa mem supported options, -M, -Y, -T. e.g. –bwa-options “-M -Y” (default: None)
Pass supported haplotype caller options as one string. Current original original haplotypecaller supported options, - min_pruning <int>, -standard-min-confidence-threshold-for- calling <int>.
Maximum number of alternate alleles to genotype (default: None)
(-G) Which groups of annotations to add to the output variant calls. Currently supported annotation groups: StandardAnnotation, StandardHCAnnotation, AS_StandardAnnotation (default: None)
(-GQB) Exclusive upper bounds for reference confidence GQ bands. Must be in the range [1, 100] and specified in increasing order (default: None)
Dont use soft clipped bases for variant calling.
Assume marking duplicates to be similar to Picard version 2.18.2.
Run haplotypecaller optimized for RNA Data
Run standalone bqsr after generating sorted bam. This option requires both –knownSites and –out-recal-file input parameters.
Suppress warning messages about system thread and memory usage.
- --num-gpus NUM_GPUS
- --gpu-devices GPU_DEVICES
Number of GPUs to use for a run. GPUs 0..(NUM_GPUS-1) will be used. If you are using flexera, please include –gpu-devices too.
Which GPU devices to use for a run. By default, all GPU devices will be used. To use specific GPU devices enter a comma-separated list of GPU device numbers. Possible device numbers can be found by examining the output of the nvidia-smi command. For example, using –gpu-devices 0,1 would only use the first two GPUs.
- --tmp-dir TMP_DIR
- --no-seccomp-override
- --with-petagene-dir WITH_PETAGENE_DIR
- --keep-tmp
- --license-file LICENSE_FILE
- --version
Full path to the directory where temporary files will be stored.
Do not override seccomp options for docker
Full path to the PetaGene installation directory where bin/ and species/ folders are located.
Do not delete the directory storing temporary files after completion.
Path to license file license.bin if not in installation directory.
View compatible software versions.