Version 1.1.0

Features

The nvfwupd command is updated with the following enhancements:
- You can update all the system components on the motherboard tray at one time. Previously, you had to update the components individually.
- You can create a JSON file with network addresses and credentials for multiple systems and automatically update multiple systems serially. Refer to Updating Multiple Systems for more information.
Various performance enhancements.
Enhancements to Redfish and new documentation to clear the BIOS and reset the BIOS to factory defaults. Refer to the NVIDIA DGX H100 User Guide for more information.

This firmware release supports the following hardware:

This firmware release supports the following operating systems:

You can download firmware packages from the NVIDIA Enterprise Support Portal at https://enterprise-support.nvidia.com/s/.

Download two firmware package files:

Components

Sample File Name

Combined Archive

DGXH100_1.1.0.tar

The combined archive includes the firmware for the system components and the GPU tray.

System Components

nvfw_DGXH100_230817.1.1.fwpkg

GPU Tray

nvfw_DGX-HGX-H100x8_0002_230705.1.1_prod-signed.fwpkg

Refer to the following table for information about component firmware versions:

Component	Version
Host BMC	23.08.18
Host BMC EROT	04.0026
SBIOS EROT	04.0026
SBIOS	v1.01.01
Motherboard CPLD	0.2.1.8
Midplane CPLD	0.2.1.0
PSU (Delta ECD16020137)	Primary 2.2 Secondary 2.1 Community 2.2
Broadcom Gen5 PCIe Switch (PEX89072-B01)	Switch 0: v0.0.6 Switch 1: v1.0.6
Gen5 PCIe Retimer	v1.30.12
Network Controller	ConnectX-7 Package: 5.9-0.5.6.0.125 Firmware: v28.36.2050
VBIOS (H100 80GB)	96.00.74.00.01
NVSwitch (GPU Tray)	96.10.3F.00.01
EROT (GPU Tray)	02.0134
HMC (GPU Tray)	HGX-22.10-1-rc44
FPGA (GPU Tray)	2.2C
PCIe Switch (GPU Tray)	1.7.5F
PCIe Retimer (GPU Tray)	2.7.9
Intel 10G Ethernet	v3.60
Intel 50G Ethernet	v2.5
M.2 NVMe (Samsung PM9A3)	GDC7502Q
M.2 NVMe (Micron 7450)	E2MU200
U.2 Kioxia CM6	1.0.7
U.2 Samsung (EVT2 PM1733)	MPK95B5Q
FRU	0.6
TPM	v15.21