As soon as the appliance is plugged in, make sure that the green power LEDs on the PS units are on. See section “Basic Operation and Installation” on page for the names and locations of the various LEDs.
|Troubleshooting Issues and Resolutions|
|System Status LED is RED||Unplug the appliance and call your Mellanox representative.|
|Power Supply Unit Status LED is not lit or is RED|
|The Power Button w/Integrated LED for the appliance shuts off|
|The link LED for the Ethernet connector does not come on|
|The activity LEDs do not come on||Check that UFM has been started.|
|The appliance is off||Press the Power Button w/Integrated LED,|
If that does not work:
|Hard drive LED is constant amber|
HDD is faulty, replace according to instructions in section "Removing a Hard Disk Drive from a 3.5” Hard Drive Carrier".
|Hard drive LED is blinking amber||RAID is rebuilding, wait for this operation to complete (might take up to 48 hours). Please refer to Section "3.5 Inch Hard Drive LEDs" and section "Removing a Hard Disk Drive from a 3.5” Hard Drive Carrier" for additional information.|
|The appliance is not working and is unresponsive||Reset the appliance.|
If resetting the appliance does not work: