Supported Network Adapter Cards
Mellanox WinOF driver supports the following Mellanox network adapter cards:
NICs | Supported Protocol | Supported Link Speed |
ConnectX®-3 Pro | InfiniBand (IB) | SDR, DDR, QDR, FDR10, FDR |
Ethernet | 10, 40 and 56 Gb/s | |
ConnectX®-3 | InfiniBand (IB)a | SDR, DDR, QDR, FDR10, FDR |
Etherneta | 10, 40 and 56 Gb/s |
Note a. This version is supported by the ConnectX®-3 adapter card, but is officially qualified for ConnectX®-3 Pro only.
The speeds listed in the table above are according to the speeds supported by the device.
Mellanox WinOF driver provides the following firmware for Mellanox NICs:
NICs | Recommended Firmware Rev. | Additional Firmware Rev. Supported |
ConnectX®-3 Pro / ConnectX®-3 Pro EN | 2.42.5000 | 2.40.7000 |
ConnectX®-3 / ConnectX®-3 EN | 2.42.5000 | 2.40.7000 |
Mellanox WinOF driver provides the following MFT version:
Supported Version | |
MFT for Windows | 4.13.3 |