Supported Network Adapter Cards
Mellanox WinOF driver supports the following Mellanox network adapter cards:
|
NICs |
Supported Protocol |
Supported Link Speed |
|
ConnectX®-3 Pro |
InfiniBand (IB) |
SDR, DDR, QDR, FDR10, FDR |
|
Ethernet |
10, 40 and 56 Gb/s |
|
|
ConnectX®-3 |
InfiniBand (IB)a |
SDR, DDR, QDR, FDR10, FDR |
|
Etherneta |
10, 40 and 56 Gb/s |
Note a. This version is supported by the ConnectX®-3 adapter card, but is officially qualified for ConnectX®-3 Pro only.
The speeds listed in the table above are according to the speeds supported by the device.
Mellanox WinOF driver provides the following firmware for Mellanox NICs:
|
NICs |
Recommended Firmware Rev. |
Additional Firmware Rev. Supported |
|
ConnectX®-3 Pro / ConnectX®-3 Pro EN |
2.42.5000 |
2.40.7000 |
|
ConnectX®-3 / ConnectX®-3 EN |
2.42.5000 |
2.40.7000 |
Mellanox WinOF driver provides the following MFT version:
|
Supported Version |
|
|
MFT for Windows |
4.13.3 |