EL8-22.04 supports all DGX products - DGX A100, DGX-2, DGX-1, DGX Station, and DGX Station A100.
Software Contents
The following table provides version information for software included in the DGX Software Stack for Red Hat Enterprise Linux 8.
note:: Unlike the DGX OS shipped with the NVIDIA DGX system, the DGX software stack for Red Hat does not include the Mellanox OpenFabrics Enterprise Distribution (MLNX_OFED) for Linux. When using MLNX_OFED with Red Hat, ensure you install a supported MLNX_OFED kernel version to avoid incompatibilities with the Red Hat distribution kernel. Refer to the DGX Software for Red Hat Enterprise Linux 8 Installation Guide for instructions.
Component |
Versions |
|---|---|
GPU Driver (R470) |
|
GPU Driver (R450) |
|
NCCL |
|
cuDNN |
|
NVIDIA System Management (NVSM) |
|
Data Center GPU Management (DCGM) |
|
DGX Station Theme |
nv-yaru-theme: 20.10-1 |
CUDA Toolkit |
CUDA 11.4 |
Docker Engine |
20.10.11 |
nvidia-container-runtime |
3.7.0-1 |
NGC CLI |
2.2.0 |
nvidia-mig-manager |
0.1.2-1 |
Compatibility
NVIDIA has validated and tested DGX Software version EL8-22.04 on the following systems:
Linux Distribution and kernel:
Red Hat Enterprise Linux 8.5
Kernel 4.18.0-xxx
NVIDIA DGX systems
NVIDIA DGX A100 with Red Hat Enterprise Linux 8.5
NVIDIA DGX-2 with Red Hat Enterprise Linux 8.5
NVIDIA DGX-1 (V100) with Red Hat Enterprise Linux 8.5
NVIDIA DGX Station with Red Hat Enterprise Linux 8.5
NVIDIA DGX Station A100 with Red Hat Enterprise Linux 8.5
21.10 Deep Learning Framework containers
NVIDIA GPUDirect Storage v1.0 (refer to the GDS documentation for additional information)
MLNX OFED version 5.4-3.1.0.0
ConnectX Firmware
ConnectX-4: 12.28.2006
ConnectX-5: 16.31.1014
ConnectX-6: 20.31.1014
Update Instructions
See the section Installing and Updating the Software for instructions.