Deploying to DeepStream for DINO
The deep learning and computer vision models that you’ve trained can be deployed on edge devices, such as a Jetson Xavier or Jetson Nano, a discrete GPU, or in the cloud with NVIDIA GPUs. TAO Toolkit has been designed to integrate with DeepStream SDK, so models trained with TAO Toolkit will work out of the box with DeepStream SDK.
DeepStream SDK is a streaming analytic toolkit to accelerate building AI-based video analytic applications. This section will describe how to deploy your trained model to DeepStream SDK.
To deploy a model trained by TAO Toolkit to DeepStream we have two options:
Option 1: Integrate the
.etlt
model directly in the DeepStream app. The model file is generated by export.Option 2: Generate a device-specific optimized TensorRT engine using TAO Deploy. The generated TensorRT engine file can also be ingested by DeepStream.
Option 3 (Deprecated for x86 devices): Generate a device-specific optimized TensorRT engine using TAO Converter.
Machine-specific optimizations are done as part of the engine creation process, so a distinct engine should be generated for each environment and hardware configuration. If the TensorRT or CUDA libraries of the inference environment are updated (including minor version updates), or if a new model is generated, new engines need to be generated. Running an engine that was generated with a different version of TensorRT and CUDA is not supported and will cause unknown behavior that affects inference speed, accuracy, and stability, or it may fail to run altogether.
Option 1 is very straightforward. The .etlt
file and calibration cache are directly
used by DeepStream. DeepStream will automatically generate the TensorRT engine file and then run
inference. TensorRT engine generation can take some time depending on size of the model
and type of hardware.
Engine generation can be done ahead of time with Option 2: TAO Deploy is used to convert the .etlt
file to TensorRT; this file is then provided directly to DeepStream. The TAO Deploy workflow is similar to
TAO Converter, which is deprecated for x86 devices from TAO version 4.0.x but is still required for
deployment to Jetson devices.
See the Exporting the Model section for more details on how to export a TAO model.
The TensorRT OSS build is required for DINO models because several prerequisite
TensorRT plugins are only available in the TensorRT open source repo and not
in the general TensorRT release. Specifically, you need the MultiscaleDeformableAttnPlugin_TRT
plugin for DINO.
If your deployment platform is an x86 PC with an NVIDIA GPU, follow the TensorRT OSS on x86 instructions; if your deployment platform is NVIDIA Jetson, follow the TensorRT OSS on Jetson (ARM64) instructions.
TensorRT OSS on x86
Building TensorRT OSS on x86:
Install Cmake (>=3.13).
NoteTensorRT OSS requires cmake >= v3.13, so install cmake 3.13 if your cmake version is lower than 3.13c
sudo apt remove --purge --auto-remove cmake wget https://github.com/Kitware/CMake/releases/download/v3.13.5/cmake-3.13.5.tar.gz tar xvf cmake-3.13.5.tar.gz cd cmake-3.13.5/ ./configure make -j$(nproc) sudo make install sudo ln -s /usr/local/bin/cmake /usr/bin/cmake
Get GPU architecture. The
GPU_ARCHS
value can be retrieved by thedeviceQuery
CUDA sample:cd /usr/local/cuda/samples/1_Utilities/deviceQuery sudo make ./deviceQuery
If the
/usr/local/cuda/samples
doesn’t exist in your system, you could downloaddeviceQuery.cpp
from this GitHub repo. Compile and rundeviceQuery
.nvcc deviceQuery.cpp -o deviceQuery ./deviceQuery
This command will output something like this, which indicates the
GPU_ARCHS
is75
based on CUDA Capability major/minor version.Detected 2 CUDA Capable device(s) Device 0: "Tesla T4" CUDA Driver Version / Runtime Version 10.2 / 10.2 CUDA Capability Major/Minor version number: 7.5
Build TensorRT OSS:
git clone -b 21.08 https://github.com/nvidia/TensorRT cd TensorRT/ git submodule update --init --recursive export TRT_SOURCE=`pwd` cd $TRT_SOURCE mkdir -p build && cd build
NoteMake sure your
GPU_ARCHS
from step 2 is in TensorRT OSSCMakeLists.txt
. If GPU_ARCHS is not in TensorRT OSSCMakeLists.txt
, add-DGPU_ARCHS=<VER>
as below, where<VER>
representsGPU_ARCHS
from step 2./usr/local/bin/cmake .. -DGPU_ARCHS=xy -DTRT_LIB_DIR=/usr/lib/x86_64-linux-gnu/ -DCMAKE_C_COMPILER=/usr/bin/gcc -DTRT_BIN_DIR=`pwd`/out make nvinfer_plugin -j$(nproc)
After building ends successfully,
libnvinfer_plugin.so*
will be generated under\`pwd\`/out/.
Replace the original
libnvinfer_plugin.so*
:sudo mv /usr/lib/x86_64-linux-gnu/libnvinfer_plugin.so.8.x.y ${HOME}/libnvinfer_plugin.so.8.x.y.bak // backup original libnvinfer_plugin.so.x.y sudo cp $TRT_SOURCE/`pwd`/out/libnvinfer_plugin.so.8.m.n /usr/lib/x86_64-linux-gnu/libnvinfer_plugin.so.8.x.y sudo ldconfig
TensorRT OSS on Jetson (ARM64)
Install Cmake (>=3.13)
NoteTensorRT OSS requires cmake >= v3.13, while the default cmake on Jetson/Ubuntu 18.04 is cmake 3.10.2.
Upgrade TensorRT OSS using:
sudo apt remove --purge --auto-remove cmake wget https://github.com/Kitware/CMake/releases/download/v3.13.5/cmake-3.13.5.tar.gz tar xvf cmake-3.13.5.tar.gz cd cmake-3.13.5/ ./configure make -j$(nproc) sudo make install sudo ln -s /usr/local/bin/cmake /usr/bin/cmake
Get GPU architecture based on your platform. The
GPU_ARCHS
for different Jetson platform are given in the following table.Jetson Platform GPU_ARCHS Nano/Tx1 53 Tx2 62 AGX Xavier/Xavier NX 72 Build TensorRT OSS:
git clone -b 21.03 https://github.com/nvidia/TensorRT cd TensorRT/ git submodule update --init --recursive export TRT_SOURCE=`pwd` cd $TRT_SOURCE mkdir -p build && cd build
NoteThe
-DGPU_ARCHS=72
below is for Xavier or NX, for other Jetson platform, change72
referring toGPU_ARCHS
from step 2./usr/local/bin/cmake .. -DGPU_ARCHS=72 -DTRT_LIB_DIR=/usr/lib/aarch64-linux-gnu/ -DCMAKE_C_COMPILER=/usr/bin/gcc -DTRT_BIN_DIR=`pwd`/out make nvinfer_plugin -j$(nproc)
After building ends successfully,
libnvinfer_plugin.so*
will be generated under‘pwd’/out/.
Replace
"libnvinfer_plugin.so*"
with the newly generated.sudo mv /usr/lib/aarch64-linux-gnu/libnvinfer_plugin.so.8.x.y ${HOME}/libnvinfer_plugin.so.8.x.y.bak // backup original libnvinfer_plugin.so.x.y sudo cp `pwd`/out/libnvinfer_plugin.so.8.m.n /usr/lib/aarch64-linux-gnu/libnvinfer_plugin.so.8.x.y sudo ldconfig
For a DINO model, you will need to build the TensorRT open source plugins and custom bounding box parser. The instructions are provided in the TensorRT Open Source Software (OSS) section above, and the required code can be found in this GitHub repo.
To integrate the models with DeepStream, you will need the following:
The DeepStream SDK. The installation instructions for DeepStream are provided in the DeepStream Development Guide.
An exported
.onnx
model file and optional calibration cache for INT8 precisionA
labels.txt
file containing the labels for classes in the order in which the networks produces outputsA sample
config_infer_*.txt
file to configure the nvinfer element in DeepStream. The nvinfer element handles everything related to TensorRT optimization and engine creation in DeepStream.
The DeepStream SDK ships with an end-to-end reference application that is fully configurable. You
can configure the input sources, inference model, and output sinks. The app requires a primary object
detection model, followed by an optional secondary classification model. The reference
application is installed as deepstream-app
. The graphic below shows the architecture of the
reference application.
There are typically two or more configuration files that are used with this app. In the install
directory, the config files are located in samples/configs/deepstream-app
or
sample/configs/tlt_pretrained_models
. The main config file configures all the high-level
parameters in the pipeline above, setting the input source and resolution, number of
inferences, tracker, and output sinks. The supporting config files configure each individual
inference engine. The inference-specific config files are used to specify models, inference
resolution, batch size, number of classes and other customization. The main config file will call
all the supporting config files. The following are config files in the
samples/configs/deepstream-app
directory for reference:
source4_1080p_dec_infer-resnet_tracker_sgie_tiled_display_int8.txt
: The main config fileconfig_infer_primary.txt
: The supporting config file for the primary detector in the pipeline aboveconfig_infer_secondary_*.txt
: The supporting config file for the secondary classifier in the pipeline above
The deepstream-app
will only work with the main config file. This file will most likely
remain the same for all models and can be used directly from the DeepStream SDK with little to no
modification. You will only need to modify or create config_infer_primary.txt
and
config_infer_secondary_*.txt
.
Integrating a DINO Model
To run a DINO model in DeepStream, you need a label file and a DeepStream configuration file. You also need to compile the TensorRT 8+ OSS and DINO bounding box parser for DeepStream.
A DeepStream sample, including documentation on how to run inference using the trained DINO models from TAO Toolkit, is provided on GitHub here.
Prerequisites for a DINO Model
DINO requires the
MultiscaleDeformableAttnPlugin_TRT
plugin. This plugin is available in the TensorRT open source repo. Detailed instructions for building TensorRT OSS can be found in the TensorRT Open Source Software (OSS) section.DINO requires custom bounding-box parsers that are not built-in inside the DeepStream SDK. The source code to build custom bounding-box parsers for DINO is available here. The following instructions can be used to build the bounding-box parser:
Install git-lfs (git >= 1.8.2).
curl -s https://packagecloud.io/install/repositories/github/git-lfs/ script.deb.sh | sudo bash sudo apt-get install git-lfs git lfs install
Download the source code with SSH or HTTPS:
git clone -b release/tlt3.0 https://github.com/NVIDIA-AI-IOT/deepstream_tlt_apps
Build the custom bounding-box parser:
// or Path for DS installation export CUDA_VER=10.2 // CUDA version, e.g. 10.2 make
This generates libnvds_infercustomparser_tlt.so
in the directory post_processor
.
If the COCO annotation file has the following in categories
:
[{'supercategory': 'Person', 'id': 1, 'name': 'Person'},
{'supercategory': 'Face', 'id': 1, 'name': 'Face'},
{'supercategory': 'Bag', 'id': 2, 'name': 'Bag'}]
Then the corresponding ddetr_labels.txt
file will be as follows:
BG
Person
Face
Bag
The detection model is typically used as a primary inference engine. It can also be used as a
secondary inference engine. To run this model in the sample deepstream-app
, you must modify
the existing config_infer_primary.txt
file to point to this model.
Option 1: Integrate the model (.onnx
) directly in the DeepStream app.
For this option, users will need to add the following parameters in the configuration file.
onnx-file=<TAO Toolkit exported .onnx>
int8-calib-file=<Calibration cache file>
From TAO 5.0.0, .etlt
is deprecated. To integrate .etlt
directly in the DeepStream app,
you need following parmaters in the configuration file.
tlt-encoded-model=<TLT exported .etlt>
tlt-model-key=<Model export key>
The tlt-encoded-model
parameter points to the exported model (.etlt
) from TLT.
The tlt-model-key
is the encryption key used during model export.
Option 2: Integrate the TensorRT engine file with the DeepStream app.
Generate the device-specific TensorRT engine using TAO Deploy.
After the engine file is generated, modify the following parameter to use this engine with DeepStream:
model-engine-file=<PATH to generated TensorRT engine>
All other parameters are identical between the two approaches. To use the custom bounding box parser instead of
the default parsers in DeepStream, modify the following parameters in the [property]
section of the config_infer_primary.txt
file:
parse-bbox-func-name=NvDsInferParseCustomDDETRTAO
custom-lib-path=<PATH to libnvds_infercustomparser_tlt.so>
Add the label file generated above using the following:
labelfile-path=<deformable_detr labels>
For all options, see the sample configuration file below. To learn more about what the parameters are used for, refer to the DeepStream Development Guide.
[property]
gpu-id=0
offsets=123.675;116.28;103.53
net-scale-factor=0.0173520735728
labelfile-path=<Path to dino_labels.txt>
onnx-file=<Path to DINO onnx model>
model-engine-file=<Path to DINO engine file>
batch-size=1
## 0=FP32, 1=INT8, 2=FP16 mode
network-mode=2
num-detected-classes=91
interval=0
gie-unique-id=1
output-blob-names=pred_boxes;pred_logits
infer-dims=3;544;960
cluster-mode=4
parse-bbox-func-name=NvDsInferParseCustomDDETRTAO
custom-lib-path=libnvds_infercustomparser_tao.so
[class-attrs-all]
pre-cluster-threshold=0.5
topk=300