DGX B200 Service Manual#
The NVIDIA DGX B200 Service Manual is also available as a PDF.
- Introduction
- Removing and Attaching the Bezel
- Power Supply Replacement
- Front Fan Module Replacement
- Front Console Board Replacement
- Motherboard Tray - Opening and Closing the I/O Door
- Motherboard Tray - Removal and Installation
- U.2 NVMe Cache Drive Replacement
- U.2 NVMe Cache Drive Post-Installation Tasks
- M.2 NVMe Boot Drive Replacement
- M.2 Boot Drive Assembly Replacement
- ConnectX-7 I/O Replacement
- ConnectX-7 I/O Card Replacement Overview
- Prepare the System for Replacement
- Remove the I/O Card above the ConnectX-7 Card to be Replaced
- Remove the ConnectX-7 Card
- Remove an IPEX Cable
- Install ConnectX-7 Card
- Insert an IPEX Cable
- Install the I/O Card above the ConnectX-7 Card
- Power on the System and Confirm the Replacement
- Network Interface Card Replacement
- Updating the ConnectX-7 Firmware
- BlueField-3 I/O Card Replacement
- BlueField-3 I/O Card Replacement Overview
- Prepare the System for Replacement
- Remove the I/O Card above the BlueField-3 Card to be Replaced
- Remove the BlueField-3 Card
- Remove an IPEX Cable
- Install the BlueField-3 Card
- Install the I/O Card and Close the System
- Power on the System and Confirm the Replacement
- DIMM Upgrade and Replacement
- Motherboard Tray Battery Replacement
- Motherboard Tray Battery Replacement Overview
- Identify a Failed Battery
- Prepare the System for Replacement
- Remove the PCI Ethernet Card
- Remove the BlueField-3 Card
- Remove an IPEX Cable
- Replace the Battery
- Install the BlueField-3 Card
- Insert an IPEX Cable
- Install the PCI Ethernet Card
- Power On the System and Confirm the Replacement
- Trusted Platform Module Replacement
- Rack Mount Kit Replacement
- Safety
Legal Information